Where is the trunk switch of the Bora?

Can you turn right at a red light intersection without a right turn arrow indicator?

You can turn right at a red light intersection without a right turn arrow indicator. When the straight and left turn signals are red, and there is no explicit prohibition against right turns, you may turn right after ensuring safety and without obstructing straight-moving vehicles or pedestrians. There are two types of traffic lights: circular (full-screen) traffic lights and arrow traffic lights. Before turning right, you must be in the rightmost motor vehicle lane; otherwise, you may face penalties such as fines or demerit points. Not driving in the correct lane can also lead to rear-end collisions. If there is a clear sign prohibiting right turns, you must not turn right under any circumstances, or you will be penalized for running a red light. Correct method for turning right at a traffic light intersection: Arrow-shaped traffic signals. A red arrow prohibiting a turn means no right turns are allowed. Vehicles must strictly follow the traffic signals. Violating traffic signals, whether going straight or turning right, constitutes running a red light and results in a 6-point penalty. Circular traffic light with no additional signs. Motor vehicles may turn right at a red light intersection without it being considered running a red light. However, drivers must yield to pedestrians and proceed cautiously to avoid accidents. Circular traffic light with additional signs. If there is a restriction on right-turning vehicles, you must stop and wait until right turns are permitted before proceeding. Criteria for determining a right turn red light violation: To be considered running a red light while turning right, three photos must be captured. The first photo is taken when the red light is on and the front wheels cross the stop line, triggering a signal. If the vehicle does not stop and continues to turn right, a second signal is triggered when the rear wheels cross the stop line, resulting in a second photo. The third photo is taken when the vehicle reaches the induction loop at the opposite right turn intersection. If all three photos are captured, it is confirmed as running a red light.

5

0

Share

What gauge wire is needed for car battery jump cables?

Car battery jump cables require 25 square millimeter copper wire, approximately 2 meters in length. Precautions for car jump-starting: Use jump cables that meet the requirements; Ensure secure connection between battery terminals and cables, as poor contact may cause sparks or excessive heat; Check the labeled voltage of both batteries to ensure they match; Put the vehicle in neutral, engage the parking brake, and start the engine; If the first attempt fails, wait one or two minutes before trying again. Reasons for following proper connection sequence during jump-starting: Most vehicles use negative grounding, meaning the metal parts of the car are connected to the negative terminal; Battery short circuits can be extremely dangerous, and with flammable engine oil and gasoline present in vehicles, accidents may occur; Small amounts of hydrogen gas may sometimes accumulate around the battery, potentially causing combustion if sparks occur during connection, though this scenario is highly unlikely.

2

5

Share

What are the different grades of gasoline?

Gasoline grades include 89, 92, 90, 93, 95, etc. Appearance of gasoline: Gasoline is a volatile, flammable hydrocarbon mixture obtained from petroleum distillation and cracking. It is a transparent liquid, flammable, with a distillation range of 30°C to 220°C. Its main components are C5-C12 aliphatic hydrocarbons and cycloalkanes, along with a certain amount of aromatic hydrocarbons. It has a high octane number and can be used as automobile fuel. Applications of gasoline: Gasoline is primarily used as a power fuel for transportation. In industries such as rubber, paint, dye, printing, pharmaceuticals, and adhesives, gasoline is used as a solvent. It is also employed as a degreasing agent for cleaning parts and clothing, as well as for pre-treatment of electroplated products.

13

5

Share

What does the abnormal tire pressure indicator mean?

The tire pressure warning light illuminates due to the following reasons: tire pressure is outside the normal range; tire deflation caused by air leakage or punctures; malfunction of the tire pressure sensor. Below are the impacts of both overinflation and underinflation: Effects of overinflated tires: Overinflation increases friction between the tire and the ground, reducing tire grip; affects vehicle braking performance and driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan. Effects of underinflated tires: Increases contact area between the tire and ground, causing tires to overheat; expands the tire carcass, leading to cracks on inner/outer sidewalls; accelerates rubber aging and increases tire wear.

5

4

Share

What are the differences between Mazda CX-4 and CX-5?

The differences between Mazda CX-4 and CX-5 are: 1. Different body dimensions: CX-4 has a body length of 4633mm and height of 1535mm; CX-5 has a length of 4555mm and height of 1710mm. 2. Different instrument panels: CX-4 adopts the instrument panel design of the Axela; CX-5 features a three-gauge binnacle design. 3. Different configurations: CX-4 comes with auto hold and paddle shifters; CX-5 has heat-insulating glass and front parking sensors. 4. Different trunk volumes: CX-4 has a trunk capacity of 400L; CX-5 has a trunk capacity of 490L.

16

2

Share

Will Stage 1 ECU Tuning Damage an Audi S4?

Audi S4 Stage 1 ECU tuning will not damage the car. Below are the impacts of Stage 1 tuning and its meaning: Impacts of Stage 1 ECU tuning on cars: After ECU tuning, the car will require higher-quality gasoline. Using low-quality gasoline may harm the vehicle. The engine will also have higher temperature requirements. The engine operates at an overclocked frequency after tuning, and without an excellent cooling system, this may affect the engine's lifespan. Additionally, vehicles with ECU tuning may be denied warranty services by authorized 4S dealerships. Meaning of Stage 1 tuning: Stage 1 tuning refers to modifying the car's ECU (Engine Control Unit). The modification cost for Stage 1 tuning is relatively low, primarily involving adjustments to car parameters such as fuel injection and ignition timing. However, this method provides only a modest improvement in the car's power output.

20

4

Share

Where is the trunk switch of the Bora?

Can you turn right at a red light intersection without a right turn arrow indicator?

What gauge wire is needed for car battery jump cables?

What are the different grades of gasoline?

What does the abnormal tire pressure indicator mean?

What are the differences between Mazda CX-4 and CX-5?

Will Stage 1 ECU Tuning Damage an Audi S4?

Where to Insert the Car USB Drive?

Will points be deducted if the car body is tilted during reverse parking?

Will I Get Points Deducted and Fined for Speeding Between 10% and 20% Over the Limit?

How high is the failure rate of the Emgrand GL after five years?