Where is the trunk switch located inside the Lavida Plus?

1 Answers
SanJesse
07/30/25 10:33am
There is no trunk switch inside the Lavida Plus. The trunk dimensions of this car are 1120mm in depth, 1010mm in width, and 560mm in height. When the second-row seats are folded down, the depth extends to 1890mm, with a total volume of 478 liters. The Lavida Plus model measures 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. In terms of power, the Lavida Plus is equipped with three engines: 1.2T, 1.4T, and 1.5L, with maximum power outputs of 116 horsepower, 150 horsepower, and 116 horsepower, respectively. The transmission system is paired with a 5-speed manual, 6-speed automatic, or 7-speed dual-clutch transmission.
Was this review help?
8
1
Share
More Forum Discussions

What Causes Unstable Idle Speed in Natural Gas Vehicles?

Unstable idle speed in natural gas vehicles may be due to uneven combustion of natural gas. Specific causes: Clogged idle air jets, malfunctioning idle control devices, weak spark in individual spark plugs, poor valve sealing, intake manifold leaks, incorrect ignition timing (too early or too late), or improper idle speed adjustment. Solutions: First, adjust the idle speed. If the issue persists after adjustment, check if the idle jets and idle air jets are clogged. If clogged, clean them with gasoline or acetone and blow through with compressed air. If not clogged, stabilize the engine at a certain RPM and listen for air leaks at the intake manifold or carburetor gaskets. If leaks are found, tighten screws or adjust gasket thickness to resolve.
3
0
Share

Does coasting downhill with the clutch pressed burn the clutch?

Coasting downhill with the clutch pressed will burn the clutch. Checking the clutch: If the clutch does not disengage completely, try pressing the clutch pedal all the way down to see if you can shift gears. If the clutch components are damaged, they need to be repaired or replaced, including the friction plate, pressure plate, and release bearing. Clutch slipping: The main causes of clutch slipping are insufficient friction on the clutch friction plate; shifting gears or disengaging before the clutch is fully engaged; driving for long periods with the clutch partially engaged or coasting with the clutch pressed; and applying excessive throttle when shifting or disengaging gears before they are fully engaged, leading to abnormal wear of the clutch plate.
6
3
Share

Can a motorcycle be transferred without annual inspection?

Motorcycles cannot be transferred without annual inspection. Introduction to vehicle transfer: Vehicle transfer refers to changing the name of the vehicle owner. When buying a used car, besides checking the condition of the car, the most important step is completing the transfer procedures. Principle of vehicle transfer: Every vehicle has a fixed registration, which mainly records the owner's information, address, and some relevant vehicle parameters. Insurance transfer is required: After the vehicle transfer is completed at the vehicle management office, the new owner should bring the transfer certificate, a copy of the vehicle license, the original insurance policy, their ID card, and the original insurer's ID card to the original insurance company to fill out a transfer application form, and then the transfer procedure can be completed.
19
0
Share

Is it normal for the screws on a new car's bumper to have been tightened?

It is not normal for the screws on a new car's bumper to have been tightened. Generally, the body parts of a vehicle are adjusted and installed at the factory and do not require later adjustments. Composition of the bumper: The front and rear bumpers of a car are made of plastic. Typically, a car's plastic bumper consists of three parts: the outer panel, the cushioning material, and the crossbeam. The outer panel and cushioning material are made of plastic, while the crossbeam is formed by stamping cold-rolled thin sheets into U-shaped channels. The outer panel and cushioning material are attached to the crossbeam. Function of the bumper: The car bumper is a safety device designed to absorb and mitigate external impacts, protecting the front and rear parts of the vehicle. In addition to maintaining its original protective function, it also aims for harmony and unity with the car's body design and pursues lightweight construction.
19
0
Share

How many people can a wedding car accommodate?

Wedding cars typically seat four people. Vehicle passenger capacity: Each vehicle model is different, and the passenger capacity varies. It depends on the specified seating capacity listed on the car owner's vehicle documents. Some cars are designated for 2 people, some for 4, and others for 5. The number of passengers allowed as stated on the vehicle's relevant documents must be strictly followed to avoid overloading. Overloading regulations: For family cars, carrying passengers exceeding 20% of the designated capacity results in a 3-point penalty, while exceeding 20% leads to a 6-point penalty. This means that if a sedan with a designated capacity of 5 people carries 6, exceeding 20%, it will incur a 6-point penalty, with consequences as severe as running a red light. Note that traffic laws do not differentiate between adults and children; 4 adults and 1 child still count as 5 people.
17
4
Share

Why is the gear shift light not working?

The gear shift light not working may be due to issues with the LED on the circuit board or the wiring. A non-functional gear shift light can lead to problems such as inability to shift gears or gear confusion. Possible causes: Blown fuse for the car's gear shift light, burnt-out bulb of the gear shift light, damaged gear shift light relay and combination switch, or poor contact in the gear shift light wiring. Solutions: Check if the fuse is in good condition; if it is damaged, replace it. For wiring issues, such as poor or loose connections, simply tighten the wiring plug. If the wires are overheating, which increases resistance and reduces the headlight's intensity, or in severe cases causes short circuits due to melted insulation, allow them to cool down. If the contacts of the lighting circuit control relay or combination switch are corroded or stuck, preventing the circuit from opening or closing, replace them accordingly.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.