Where is the trunk button on the Fit?

Is the Mercedes GLK a four-wheel drive vehicle?

Mercedes GLK is a four-wheel drive vehicle. Four-wheel drive refers to a vehicle that maintains four-wheel drive throughout the entire driving process, with the engine's output torque distributed to the front and rear wheels in a fixed ratio. This driving mode ensures excellent off-road and handling performance at all times. Below is relevant information about the Mercedes GLK: 1. The Mercedes GLK is a mid-size SUV under the Mercedes brand, with dimensions of 4556mm in length, 1840mm in width, and 1689mm in height, and a wheelbase of 2755mm. 2. The Mercedes GLK is equipped with two types of engines: a 2.0-liter turbocharged engine and a 3.0-liter naturally aspirated engine. 3. The 2.0-liter turbocharged engine has a maximum power output of 155kW and a maximum torque of 350Nm, paired with a 7-speed automatic transmission. 4. The 3.0-liter naturally aspirated engine has a maximum power output of 180kW and a maximum torque of 300Nm, also paired with a 7-speed automatic transmission.

8

2

Share

How to Classify Car Categories?

Cars are classified into A00 (mini cars), A0 (subcompact cars), A (compact cars), B (mid-size cars), C (full-size cars), and D (luxury cars). Below are specific methods to distinguish car categories: 1. Wheelbase: Below 2350mm is a mini car; 2350mm-2500mm is a subcompact car; 2500mm-2700mm is a compact car; 2700mm-2800mm is a mid-size car; 2800mm-2900mm is a full-size car; above 2900mm is a large luxury car. 2. Length: Below 3.7M is a mini car; 3.7-4.3M is a subcompact car; 4.3-4.6M is a compact car; 4.6-4.9M is a mid-size car; 4.9-5.1M is a full-size car; above 5.1M is a luxury car.

8

2

Share

What are the vehicle emission inspection standards?

Vehicle emission inspection standards: Carbon monoxide: A (700mg/km); B (500mg/km); Non-methane hydrocarbons: A (68mg/km); B (35mg/km); Nitrogen oxides: A (60mg/km); B (35mg/km); PM particulate matter: A (4.5mg/km); B (3mg/km). General process for vehicle emission inspection: 1. Information entry: The computer inputs information, registers vehicle details, and automatically assigns an inspection line based on vehicle characteristics. 2. Designated inspection line: Dispatchers direct staff to drive the vehicle to the assigned inspection line; supervisors cannot alter the inspection route. 3. Inspection line confirmation: The control room verifies if the vehicle has entered the correct inspection line; without confirmation, the next step cannot proceed. 4. Emission testing: Inspectors follow on-screen prompts to conduct the test correctly. Results are matched against standard values and uploaded to the server. 5. Payment: Finally, pay fees at the environmental inspection office. Non-compliant vehicles require rectification before retesting. Qualified vehicles receive an environmental certification mark.

9

0

Share

What is the driving experience of the Geely Binrui like?

The driving space is quite spacious, providing a comfortable experience. Below is a relevant introduction about the Geely Binrui: Exterior: The Binrui adopts the latest family-style design with a coupe body shape, presenting a youthful, fashionable, and sporty appearance. The black design of the front grille gives the car a wild look from the front. The water ripple-style air intake grille integrates seamlessly with the headlights, complemented by dual C-shaped air intakes below, making the entire front fascia appear quite aggressive and exuding a strong sporty vibe. The headlights look sharp and full of character. The car features a fastback-style rear design. Interior: The dashboard uses a soft-touch material with extensive leather coverage, including a leather steering wheel and leather seats, enhancing the premium feel of the Binrui. Almost every surface that can be touched inside the car offers excellent tactile feedback, with meticulous attention to detail. The 10-inch central touchscreen, equipped with a voice interaction system, is particularly noteworthy for its intelligence.

10

4

Share

How to Detect if a Car Has an Electrical Leak?

Here are the methods to check for an electrical leak in a car: 1. Observe the color of the battery's inspection hole and check if the battery's exterior is intact and whether there is any leakage; 2. Use a multimeter to measure the battery voltage and charging output to ensure they are normal, with the normal voltage being above 12 volts, and not dropping below 10 volts after continuous discharge for 10 seconds; 3. Remove the negative terminal of the battery, set the multimeter to the current measurement mode, connect the red probe to the battery's negative terminal wire and the black probe to the negative terminal post, observe the ammeter reading, and compare the measured current value with maintenance data to see if it is within the normal range. If the measured current is too high, it indicates an electrical leak in the car; 4. Turn off all electrical devices in the car, ensure the doors and trunk are locked, disconnect the negative terminal of the battery, wait for 20 minutes, then connect one end of a test light to the battery's negative wire and the other end to the negative terminal post. If the light turns on, it means the electrical devices and wiring are still leaking, and you should check the relays and fuses at this point.

15

2

Share

What is the penalty for speeding between 10% and 20%?

For speeding between 10% and 20% of the road speed limit, a fine will be imposed and 3 points will be deducted. Below are the specific details regarding road speed limits: Penalty regulations: Speeding within 10% of the road speed limit will result in a warning without a fine or point deduction; speeding between 10%—20% will result in a fine and 3-point deduction; speeding between 20%—50% will result in a fine and 6-point deduction; speeding over 50% will result in a fine and 12-point deduction. Formula for calculating speeding percentage: (Speed/Limit speed—1)*100 will give the speeding percentage. For example, if the speed limit is 70km/h and the vehicle speed is 80km/h, divide 80 by 70, subtract 1, and multiply by 100 to get 14.28, meaning the speeding percentage is 14%. If the speed limit is 60km/h and the vehicle speed is 70km/h, then divide 70 by 60, subtract 1, and multiply by 100 to get 16%, meaning the speeding percentage is 16%.

10

3

Share

Where is the trunk button on the Fit?

Is the Mercedes GLK a four-wheel drive vehicle?

How to Classify Car Categories?

What are the vehicle emission inspection standards?

What is the driving experience of the Geely Binrui like?

How to Detect if a Car Has an Electrical Leak?

What is the penalty for speeding between 10% and 20%?

Is the Volkswagen Jetta VS5 a joint venture car?

How to Use ETC on Free Highways?

How to Determine if an Engine Has Cylinder Scoring?

What Causes the Fuel Gauge Not to Display on the Dashboard?