···
Log in / Register

Where is the triangle stand of the Tayron?

1 Answers
JackDella
09/04/25 6:21am

The triangle stand of the Tayron is placed near the spare tire in the trunk. The function of the car triangle stand: When a car breaks down on the road, place the triangle stand more than 20 meters behind the vehicle. This can alert drivers coming from behind that there is a stopped vehicle ahead, prompting them to slow down and pass safely. Alternatively, place some debris or branches on the road between the car and the warning sign to prevent drivers from bypassing the warning sign and causing a rear-end collision. How to use the car triangle stand: The triangular warning sign has two movable sides. When using it, pull out these two movable sides. Each end of these sides has a button; connect these buttons together. Then, pull out the movable iron stand on the side with the iron frame, allowing the triangular warning sign to stand upright on the ground.

Was this review help?
2
4
Share
More Forum Discussions

What is the fuel consumption per kilometer for the Mercedes-Benz GLC260?

The fuel consumption of the Mercedes-Benz GLC260 is approximately 0.105L per kilometer. Below are the relevant details about the Mercedes-Benz GLC260: 1. Power: The Mercedes-Benz GLC260 is equipped with a 2.0T turbocharged engine, delivering a maximum power of 155 kW and a maximum torque of 350 Nm, paired with a 9-speed automatic transmission, achieving a 0-100 km/h acceleration time of 7.8 seconds. 2. Exterior: The design is elegant and smooth, with a front face that is both stable and stylish, featuring the iconic three-pointed star emblem. The side profile is full and rounded, with smooth lines and well-proportioned dimensions. The rear end is stylish and appealing, exuding a strong urban vibe.
17
0
Share

Is the Mercedes-Benz C200 an imported car?

The Mercedes-Benz C200 is not entirely an imported car; it could also be a domestically produced vehicle. Below is a related introduction to the Mercedes-Benz C200: 1. Powertrain: It is equipped with a 2.0T engine, delivering a maximum power of 184 horsepower and a maximum torque of 300 Nm, paired with a 9-speed automatic transmission. 2. Features: The Mercedes-Benz C200 comes standard with features such as active brake/active safety system, cruise control, automatic parking assist, auto hold, variable steering ratio, and smartphone integration. 3. Chassis structure: Both the front and rear suspensions of the Mercedes-Benz C200 use multi-link independent suspension.
8
2
Share

What does 'Please check charging system' mean for BYD?

On-board charger malfunction. Replacing the charger will resolve the issue. When charging a BYD E6, the high-voltage distribution box under the sub-instrument panel is in operation, during which several 'click' sounds from relay engagement will occur; if equipped with an air-cooled on-board charging device, it will also be operational, and the cooling fan will produce a 'humming' sound during operation - both are normal conditions. The system will automatically stop charging when the power battery is fully charged. Relevant information about BYD is as follows: 1. Introduction: BYD is a Chinese automotive brand established in 1995, primarily manufacturing commercial and family cars as well as batteries. Starting with a team of just over 20 people, it grew to become the world's second-largest rechargeable battery manufacturer by 2003, the same year it established BYD Auto. 2. Logo meaning: The new BYD logo no longer uses the original blue-and-white color scheme. The design has been changed to an oval shape incorporating light and shadow elements. Significant changes have been made to the font arrangement and graphic colors, highlighting BYD Auto's innovation, technology, and corporate culture essence, infusing the BYD brand with new meaning and vitality.
13
0
Share

What are the driving modes of Mercedes-Benz?

Mercedes-Benz driving modes are divided into the following five types: 1. E mode: The full name is ECO economic mode. The ECO mode is the most economical and energy-saving, and it can be selected for normal driving on good roads under different conditions. 2. C mode: The full name is Comfort mode. It can be selected for relaxed and comfortable driving on urban roads. 3. S mode: The full name is Sport mode. It can be selected when driving on suburban roads or highways. 4. S+ mode: The full name is Sport+ extreme sport mode. It can be selected for overtaking and high-speed driving on highways. The gear shift speed is faster than in S mode, but jerking may be felt at low speeds, and the start-stop function will be turned off. 5. I mode: The full name is individual personalized mode. The driver can individually set the power, steering, start-stop, and air conditioning modes according to their own preferences.
17
0
Share

What does it mean when a Buick displays an ESC malfunction?

When a Buick displays an ESC malfunction, it indicates a fault in the Electronic Stability Control system. Below is a detailed introduction to the Electronic Stability Control system: 1. Main functions: The ESC system is an advanced active safety feature in vehicles, integrating the functionalities of the Anti-lock Braking System (ABS) and Traction Control System (TCS). Additionally, it incorporates a yaw rate sensor, lateral acceleration sensor, and steering wheel angle sensor to enhance vehicle stability during steering. 2. Practical role: The ESC system helps prevent hazardous situations. During rapid turns or lane changes when the vehicle becomes highly unstable, it compensates for vehicle stability by applying brakes to specific wheels or adjusting engine torque, ensuring smoother and safer lane changes or cornering.
19
2
Share

Where is the Crankshaft Position Sensor Located on the Buick Excelle?

The crankshaft position sensor on the Buick Excelle is located at the flywheel of the crankshaft. Below is some relevant information about the crankshaft position sensor: 1. Definition: The crankshaft position sensor, also known as the engine speed and crankshaft angle sensor, functions to collect signals related to the crankshaft's rotation angle and engine speed. These signals are then input into the Electronic Control Unit (ECU) to determine the ignition timing and fuel injection timing. 2. Working Principle: When the crankshaft position sensor rotates with the crankshaft, according to the working principle of the magnetic induction sensor, each time the signal rotor passes a tooth, a periodic alternating electromotive force (i.e., the electromotive force reaches a maximum and then a minimum) is generated in the sensing coil. Correspondingly, the coil outputs an alternating voltage signal.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.