Where is the TRC button on the Corolla?

1 Answers
KendraLynn
07/29/25 9:54pm
The TRC button on the Corolla is located below the left side of the steering wheel. Pressing and holding this switch can deactivate the traction control system. However, it is recommended not to turn it off. When the drive wheels slip, the traction control system can limit the engine's power output, thereby preventing excessive wheel spin. Almost all vehicles are equipped with a traction control system. The Corolla is a compact sedan under Toyota, with dimensions of 4630mm in length, 1775mm in width, and 1480mm in height, and a wheelbase of 2700mm. In terms of power, this car is equipped with two engines: one is a 1.8-liter naturally aspirated engine, and the other is a 1.2-liter turbocharged engine.
Was this review help?
5
1
Share
More Forum Discussions

What is the reason for the car SET light being on?

Car SET light being on is caused by abnormal tire pressure. Many vehicles nowadays are equipped with a tire pressure monitoring system. When the sensors detect abnormal tire pressure, it will alert the driver on the dashboard to check the tires. In some vehicles, the SET button on the center console will also light up simultaneously. In such cases, you should immediately stop to check if there is any air leakage in the tires. If the tires are underinflated, you need to replace them with the spare tire before continuing to drive, and should not continue driving. The tire pressure set in summer should be slightly lower than in winter because the road surface temperature is very high in summer, and the tire temperature also increases while driving, causing the gas inside the tires to expand. If the tire pressure is too high in summer, it significantly increases the risk of a tire blowout. In winter, the tire pressure can be set a bit higher because the cold air causes the tire pressure to display slightly lower than usual.
7
3
Share

What does OPS mean on a car?

OPS on a car stands for Optical Parking System, which is essentially an extension of the parking assistance system, commonly known as parking radar functionality. The Optical Parking System analyzes, processes, and calculates the ultrasonic signals reflected back from obstacles detected by the parking radar's ultrasonic sensors. It calculates the distance between the obstacle and the car, determines the relative position of the obstacle to the car, and then displays a highly intuitive animated simulation image on the LCD screen of the audio navigation system. While driving, it's important not to overly rely on these assistance systems; instead, practice more to improve your driving skills. When parking, frequently check the side mirrors on both sides to gauge the distance between the rear wheels and the parking line, as well as the distance between the rear of the car and any obstacles.
8
1
Share

What is Carplay in Cars?

Carplay in cars refers to the CarPlay system, which is Apple's in-car connectivity system for iPhones. Daily driving precautions are as follows: 1. Regular vehicle checks: To ensure driving safety, it is advisable to perform a quick inspection around the vehicle before each trip. Check for any tire deflation, obstructions on the license plate, proper adjustment of rearview mirrors, and test the brakes for any issues. Periodically check the water level in the radiator over longer intervals to ensure safe vehicle operation. 2. Pay attention to road conditions: While driving, maintain a clear mind and stay alert to road conditions at all times, prioritizing safety above all. Avoid reckless behavior such as unnecessary overtaking and adopt the attitude of "preferring to wait three minutes rather than rush one second." 3. Avoid fatigued driving: Many accidents are caused by fatigued driving, which impairs judgment, reaction time, and concentration. Therefore, it is crucial to avoid driving while fatigued.
8
1
Share

Should the scooter run at 40 or 60 during the break-in period?

During the break-in period of a scooter, it is best not to exceed 50km/h, and the break-in distance should be over 500 kilometers. The reasons for higher fuel consumption during the break-in period and the precautions are as follows: Reasons for higher fuel consumption during the break-in period: When a new car is in the break-in period, all its parts need to come into contact, rub, and mesh with each other during driving to adapt to one another. Friction requires more power, which leads to higher fuel consumption. After the break-in period, fuel consumption will gradually decrease. Precautions during the break-in period: Avoid emergency braking, as it not only shocks the braking system that is breaking in but also increases the impact load on the chassis and engine. It is best to avoid emergency braking within the first 300 kilometers of driving. Additionally, running a new car at full load during the break-in period can cause damage to the components.
6
5
Share

Is it worth claiming insurance for an 800-yuan car paint repair?

If the car owner has purchased scratch insurance, it is advisable to file an insurance claim for an 800-yuan paint repair. Additional information is as follows: 1. Scratch Insurance: Scratch insurance specifically covers scratches. If the scratches on the car body are clearly caused by collisions or scrapes, they are not covered under scratch insurance, and the owner should handle them through collision damage insurance. To get the most cost-effective result from an insurance claim, the owner must assess the severity of the scratches and the approximate repair costs. Remember, after filing a claim, the premium for the next year's renewal will inevitably be higher than this year's. If the repair cost far exceeds the increased premium for the next year, then filing a claim is worthwhile. 2. Precautions: It is important to note that insurance companies generally require scratch insurance claims to be filed within a certain time frame. If the scratches on the car body show obvious signs of rust or aging, the insurance company will likely reject the claim. Lastly, it is not recommended for owners to accumulate multiple scratches and file a single claim, as in practice, insurance companies may refuse compensation based on relevant clauses.
12
0
Share

How to Disassemble a Chevrolet Car Key?

Steps to disassemble a Chevrolet car key: 1. Press the key switch to eject the mechanical key. There is a latch inside the key slot that needs to be pried open; 2. After prying open the latch, continue prying along the backside as there are several more latches inside; 3. Pry open the side of the key to separate the key casing. Chevrolet is an automobile brand under General Motors. Taking the Chevrolet Cavalier 2021 325T Automatic Joy Edition as an example: it is a compact car launched by SAIC-GM-Chevrolet, with a length, width, and height of 4474mm, 1730mm, and 1471mm respectively, a wheelbase of 2600mm, equipped with a 1.0T turbocharged engine, delivering a maximum power of 92kw, and paired with a 6-speed automatic transmission.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.