Where is the transmission oil filler port on the Teana?

What is the production period of China III vehicles?

China III vehicles refer to those manufactured between 2008 and 2011. Below are the implementation timelines for China III and China IV standards: 1. China III: The China III standard was officially implemented on July 1, 2008, marking the "starting point" for China III. 2. China IV: The China IV standard came into effect on July 1, 2011, serving as the "starting point" for China IV. Here's a brief introduction to China III: (1) The China III standard represents China's third-stage vehicle emission standard. (2) The national third-stage emission standard is equivalent to the Euro III emission standard, meaning the exhaust pollutant levels match Euro III requirements, with the key difference being that new vehicles must be equipped with an OBD (On-Board Diagnostics) system. (3) To consistently meet the China III emission standards, vehicles must incorporate technical measures that ensure pollutant emissions comply with China III requirements, while also using fuel that meets Euro III standards.

17

2

Share

Where is the car engine located?

The engine number is stamped on the left side of the engine, near the flywheel. Precautions for using a car engine are as follows: 1. Avoid coasting in neutral: The engine itself has a fuel-cut function during deceleration, and coasting in neutral is not conducive to fuel economy. 2. Pay attention to observation while using the vehicle: If oil is found on the ground, determine whether there is an engine oil leak and promptly communicate with the car 4S store to eliminate potential safety hazards. 3. For vehicles equipped with a turbocharger, do not turn off the engine immediately after high-speed driving or climbing a slope: Let it idle for 10 minutes before shutting it off. Vehicles with turbochargers accumulate carbon deposits several times faster than naturally aspirated vehicles. 4. Replace the brake fluid promptly if it is contaminated with water or impurities: When water is mixed into or absorbed by the brake fluid, or if impurities or sediments are found, the brake fluid should be replaced or carefully filtered. Otherwise, it may lead to insufficient braking pressure, affecting braking performance.

10

1

Share

What causes the sunroof rattle in the Corolla 1.2T?

The causes of sunroof rattle in the Corolla are: 1. Mainly due to gaps between the sunroof and contacting components, which can be resolved by applying adhesive tape or 3M tape. 2. Other possible causes include dirt in the sunroof sliding rails, damaged or aged rubber seals around the sunroof, or loose components. 3. If no issues are found during external inspection, applying lubricant to the sunroof sliding rails may help. If the problem persists, professional repair is recommended. Additional note: During car washing, avoid directing high-pressure water jets at the rubber seals, as this may deform them and allow water ingress, while also significantly damaging the seals.

9

4

Share

Where is the windshield washer fluid located in the Geely Binyue?

Geely Binyue's windshield washer fluid is filled at the filling port on the left side of the engine compartment. Windshield washer fluid, also known as windshield cleaning fluid, mainly consists of: water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. The functions of windshield washer fluid are as follows: 1. It keeps the front windshield transparent while driving; 2. It prolongs the life of the windshield and wipers; 3. It prevents the windows from icing up in winter; 4. It prevents static electricity on the windows. Additional information: Taking the 2020 Geely Binyue as an example, it is a compact SUV with body dimensions of: length 4330mm, width 1800mm, height 1609mm, a wheelbase of 2600mm, a fuel tank capacity of 45 liters, and a body weight of 1310kg.

9

1

Share

What is the lifespan of the Aisin 8AT transmission?

Generally, the lifespan of the Aisin 8AT transmission is around 500,000 kilometers if properly maintained. However, the actual lifespan may vary depending on the vehicle's usage and the owner's driving habits. Transmission fluid should typically be replaced every three years or every 60,000 kilometers. During the fluid replacement, the transmission can also be inspected and serviced. Below is a brief introduction to transmissions: 1. Classification of transmissions: Transmissions are divided into manual transmissions and automatic transmissions. Manual transmissions consist of gears and shafts, while automatic transmissions include components like torque converters and planetary gears. 2. Development of transmissions: With the continuous advancement of the automotive industry, transmissions have evolved from manual to automatic. Transmissions allow the car to reverse without changing the engine's rotation direction, and shifting into neutral can interrupt power to enable engine starting and gear shifting. Owners using automatic transmissions can drive more effortlessly, and compared to manual transmissions, automatic transmissions are less prone to malfunctions.

20

3

Share

Why is a China V vehicle not consuming urea?

Check if the urea nozzle is crystallized. More information about China V vehicles not consuming urea is as follows: 1. Introduction: The scientific name of automotive urea is Diesel Exhaust Fluid (DEF). It is used in diesel engines and is a liquid applied in SCR technology to reduce nitrogen oxide pollution in diesel vehicle exhaust. Its composition is 32.5% high-purity urea and 67.5% deionized water. Although automotive urea is also urea, it is vastly different from agricultural urea. Automotive urea has strict ratio requirements, basically consisting of high-purity urea and deionized water, with the proportion strictly controlled. One of the standards for quality is the degree of impurity control. Agricultural urea contains more impurities such as particulates, metal ions, and minerals, which are very harmful. 2. Check the urea nozzle: This involves checking whether the urea nozzle is crystallized, causing blockage, and whether the control unit is not supplying power to the nozzle.

9

3

Share

Where is the transmission oil filler port on the Teana?

What is the production period of China III vehicles?

Where is the car engine located?

What causes the sunroof rattle in the Corolla 1.2T?

Where is the windshield washer fluid located in the Geely Binyue?

What is the lifespan of the Aisin 8AT transmission?

Why is a China V vehicle not consuming urea?

Is the Bora a B-segment car?

What are the reasons for the fault light of China V diesel engine being on?

How to replace the window regulator of Magotan?

What are the differences between the Sagitar and the Lavida?