Where is the transmission oil filler port on the Geely Emgrand GL?

1 Answers
LaGia
07/29/25 3:41pm
Emgrand GL manual transmission oil change port is located on the transmission housing of the vehicle. Below is relevant information: 1. Exterior: The Emgrand GL continues the family-style water ripple grille design, featuring new integrated LED headlights for high and low beams, with the fog lights repositioned above the LED daytime running lights. The new 17-inch wheels and chrome-plated door handles enhance the premium feel. Additionally, the dual-exhaust port design adds a sporty and youthful appearance. 2. Interior: The Emgrand GL is equipped with a three-spoke multifunction steering wheel and a large central control LCD screen, giving the vehicle a youthful overall look. It also includes smart features supporting remote control via a mobile app, allowing remote engine start, window operation, and air conditioning control.
Was this review help?
12
4
Share
More Forum Discussions

How to Connect Bluetooth in Land Rover with Full English Interface?

Turn on the Bluetooth on your phone and the car's Bluetooth system, then search for Bluetooth devices on your phone and pair to connect. If prompted for a password, enter the pairing code 0000. Below is a brief introduction to car Bluetooth: 1. Features: Automatically identifies mobile phones, allowing connection without cables or phone holders; drivers can control their phones without touching them, even keeping both hands on the steering wheel, using voice commands to answer or make calls, reducing the likelihood of traffic accidents. 2. Precautions: Avoid prolonged use under strong light.
9
4
Share

Do I Need Wheel Balancing and Four-Wheel Alignment When Changing Rims?

Generally, when changing rims, you need to perform wheel balancing rather than a four-wheel alignment. Here is the relevant information: 1. Introduction to Wheel Balancing: Wheel balancing involves using an instrument to detect and add counterweights to the lighter areas, ensuring the tire's center of gravity remains at the center. This prevents uneven force distribution during high-speed rotation. 2. Purpose of Four-Wheel Alignment: Four-wheel alignment ensures that the vehicle's wheels maintain straight-line travel during driving and that the steering wheel can automatically return to position after turning.
20
3
Share

Where to Add Windshield Washer Fluid in the Lynk & Co 06?

In the engine compartment, you can add windshield washer fluid by opening the engine hood. The Lynk & Co 06 is a compact SUV under the Lynk & Co brand, equipped with two types of engines: a low-power 1.5-liter turbocharged engine and a high-power 1.5-liter turbocharged engine. The Lynk & Co 06 has a wheelbase of 2640 mm, with overall dimensions of 4340 mm in length, 1820 mm in width, and 1625 mm in height. More details: 1. Exterior Design: The Lynk & Co 06 features a design called "Urban Skyline Front Face," inspired by the bustling scenes of global cities during day-night transitions. The designers incorporated orange decorative lines on the lower bumper, resembling thoughts streaking across the skyline, enhancing the aesthetic tension. 2. Configuration: In terms of technological applications, the Lynk & Co 06 is the first to be equipped with the City Captain intelligent driving assistance system, which includes up to 21 intelligent driving assistance technologies, enabling L2.5-level autonomous driving. The Lynk & Co 06 also comes with an intelligent connectivity system, integrating three major categories of technological assistance: smart interaction, smart travel, and smart living. Through convenient features like "Three-Finger Screen Swipe," remote vehicle control, and car sharing, it provides users with an elevated and comfortable experience.
11
1
Share

Can the Lamando use 92 octane gasoline?

According to the official vehicle manual recommendation, the Lamando should use 95 octane gasoline. In addition to checking the appropriate gasoline grade in the vehicle manual, you can also find it on the fuel tank cap, which will also be marked. Usually, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the use of some new technologies, the gasoline grade cannot be determined solely by the compression ratio. High compression ratio engines can also be tuned to use lower octane gasoline because, apart from the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally speaking, the higher the gasoline octane number, the higher the octane value and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the Lamando occasionally uses the wrong gasoline grade, simply switch back to the correct grade after use. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, using higher octane gasoline will not cause damage, but the increase in octane value will change the fuel's ignition point, leading to delayed combustion in the engine. This means the engine's power output and thermal efficiency will decrease, resulting in poorer performance. For vehicles recommended to use higher octane gasoline, using lower octane gasoline can cause engine knocking. Because the octane value is too low, the gasoline's ignition point decreases, causing it to ignite prematurely during the compression stroke. If the fuel ignites before the spark plug fires during the compression stroke, resistance will occur during the upward stroke. This resistance will make the engine run very unstably. If the knocking is mild, it will only increase noise without significant damage to the engine. However, if the knocking is severe, it indicates that the engine's condition is very serious. The vibration not only affects driving stability but can also cause abnormal wear on the pistons and cylinders, and in severe cases, even cylinder scoring.
19
0
Share

What Causes the Coolant Level to Drop by Half Within Days After Replacement?

The primary reason for coolant reduction is natural evaporation, which is a normal phenomenon. This applies to other fluids like engine oil and windshield washer fluid as well—they all gradually deplete during vehicle operation. Coolant serves the crucial function of cooling the car engine, which consistently operates at high temperatures. Since the coolant is in direct contact with the engine, some consumption is expected. How to choose coolant: The key specifications for coolant are its freezing and boiling points. Market offerings typically include variants with freezing points of -15°C, -25°C, -30°C, and -40°C. As a rule of thumb, select a coolant with a freezing point at least 10°C lower than the lowest recorded temperature in your region. Methods to check for coolant deficiency: Monitor the coolant warning light on your dashboard. If illuminated, it likely indicates low coolant levels, though it could also signal excessively high cylinder temperatures. Inspect the coolant reservoir. If the fluid level falls below the minimum (MIN) mark, do not continue driving—promptly replenish the coolant. Check the level indicators on the coolant overflow tank. Proper coolant levels should remain between the MAX and MIN markers. If the level drops below MIN, this confirms a coolant shortage.
16
1
Share

What to Do When the Fuel Tank Cap of a Magotan Won't Lock?

The reasons why the fuel tank cap of a Magotan won't close include failure of the unlocking motor and mechanism, the inner cap's tether not being properly aligned, or the inner cap not being properly closed. It is recommended that the owner take the vehicle to a 4S shop for inspection and repair. Here are some refueling precautions: During regular use of the vehicle, try not to wait until the fuel warning light comes on before refueling. The fuel pump is located inside the fuel tank and operates at a high temperature when continuously working. Being immersed in fuel helps to effectively cool it down. When the fuel warning light comes on, it indicates that the fuel level is below the fuel pump. Consistently waiting until the light comes on to refuel can shorten the fuel pump's lifespan. Having too little fuel or running out of fuel may also lead to the fuel pump burning out.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.