Where is the transmission oil filler port on the Dongfeng Peugeot 308?

2 Answers
LeKevin
07/25/25 3:51pm
For the Dongfeng Peugeot 308 manual transmission, the oil filler port is located at the top center of the transmission. There is a round screw in the middle position that can be unscrewed. The manual transmission mainly consists of gears and shafts, achieving speed and torque variation through different gear combinations. The method for changing transmission oil in the Peugeot 308 is as follows: 1. Lift the vehicle and use an appropriate screwdriver to remove the inner and outer transmission covers. 3. Remove the transmission oil filter. 4. Take off the oil pan gasket and clean surrounding contaminants. 5. Replace with a new filter and oil gasket. 6. Wipe the surfaces of replaced components clean and reinstall the cleaned rear cover. 7. Add the manufacturer-recommended oil.
Was this review help?
16
1
Share
ChaseLee
08/11/25 9:35pm
I've been driving a Peugeot 308 for many years. The transmission oil filler port is usually located under the chassis near the front wheels, requiring the vehicle to be lifted to access the small cap. DIY operation is troublesome, so I recommend visiting a professional repair shop: they'll use a jack to elevate the car, remove the protective cover, and insert an oil pipe to fill with standard transmission fluid. Don't skimp on regular maintenance - change the oil every two years or 50,000 km. Otherwise, gear wear may cause rough shifting or even total transmission failure. Always check for leaks after refilling and clean surrounding areas to prevent dust contamination. Regular maintenance saves big money in the long run - safety first, never cut corners with DIY attempts. I learned this lesson the hard way after negligence cost me over a thousand dollars in repairs last time.
Was this review help?
14
2
Share
Expand All
More Forum Discussions

What to Do When the Windshield Wiper Fails?

The solutions for a malfunctioning windshield wiper are as follows: 1. Check the wiper blade. Simply replace the wiper blade if necessary. 2. Inspect the wiper motor. After opening the car hood, you can see the wiper motor. Touch the motor with your hand; if it feels hot, it indicates an internal short circuit, and replacing the motor will solve the problem. 3. Examine the wiper linkage. The wiper linkage has many connection points, and issues with these points can prevent the wiper from functioning properly. You can determine if it's a linkage fault by observing the wiper's operation. 4. Check the wiper fuse. To protect the car's wiring, electrical devices are equipped with fuses. If the wiper doesn't work, check if the wiper fuse is blown and replace it with a spare fuse if necessary. 5. Inspect the wiper switch. Car electronics can be unstable. If no issues are found in the above checks, consider that the wiper switch might be faulty. You can use a multimeter to test the switch's condition or directly replace it with a new one for testing.
8
4
Share

Motorcycle License D or E?

License D allows the holder to operate ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, and light motorcycles; License E only permits the operation of ordinary two-wheeled motorcycles and light motorcycles. More details about D and E licenses are as follows: 1. License D authorizes the operation of three-wheeled motorcycles with an engine displacement exceeding 50ml or a maximum design speed exceeding 50km/h, and also permits the operation of vehicles covered by licenses E and F. 2. License E authorizes the operation of two-wheeled motorcycles with an engine displacement exceeding 50ml or a maximum design speed exceeding 50km/h, and also permits the operation of vehicles covered by license F.
20
3
Share

What is the suitable age range for a baby to use a car safety seat?

Child safety seats are generally designed for children between six months and eight years old. Here is more information about child safety seats: 1. A car child safety seat, also known as a Child Restraint System (CRS), is specifically designed for children of different ages and installed in vehicles to effectively enhance their riding safety. 2. In the event of a collision or sudden deceleration, a car child safety seat can mitigate impact forces on children and restrict their body movement to reduce injuries, ensuring their safety. It is suitable for children weighing less than 36 kilograms.
20
5
Share

How to Identify the Correct Side of a Tire?

Here are the methods to distinguish the correct side of a tire: 1. Unidirectional tires: Look for an arrow mark on the tire sidewall. During installation, simply align the arrow to face forward. 2. Symmetrical tires: There is no distinction between the front and back sides. 3. Asymmetrical tires: One side of the tire will be marked with the word "outside". During installation, ensure the "outside" marking faces outward. Below are some tire maintenance tips: 1. Regularly check tire pressure. 2. Adjust tire pressure according to different seasons. 3. Pay attention to wear indicators to check for excessive wear. 4. Rotate tire positions after driving for a certain period. 5. Periodically check front wheel alignment. 6. Be mindful of your driving habits.
9
2
Share

Why is it difficult to restart the car after a hot shutdown?

Here are the main reasons why it is difficult to restart the car after a hot shutdown: 1. Faulty fuel pump relay: Generally, it is caused by thermal breakdown of the diode in the relay. Prolonged power supply leads to diode breakdown, disconnecting the fuel pump relay. As a result, components powered by the fuel pump relay, such as the fuel pump, injector, carbon canister solenoid valve, and camshaft adjustment solenoid valve, lose positive power supply, and the voltage drops from 120V to 0V, causing the computer to detect a circuit fault. 2. Faulty crankshaft position sensor: Its working condition needs to be checked, and replacement is required if issues are found. 3. Abnormal water temperature sensor: Its working condition should be checked, and replacement is necessary if faulty.
4
5
Share

What is the general lifespan of a turbocharger?

Turbocharged engines can generally maintain a lifespan of around 250,000 kilometers. More information about turbocharged engines is as follows: 1. A turbocharged engine refers to an engine equipped with a turbocharger. The turbocharger is essentially an air compressor that increases intake air volume by compressing air. It uses the inertial force of exhaust gases expelled by the engine to drive a turbine in the turbine chamber, which in turn drives a coaxial impeller. The impeller then pressurizes the air delivered from the air filter pipe, forcing it into the cylinders under increased pressure. 2. The turbocharger is the only mechanical device capable of increasing the output power of an engine without altering its working efficiency.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.