Where is the transmission oil filler port on a Volkswagen?

1 Answers
DelAbigail
07/29/25 9:50pm
Volkswagen transmission oil filler port is located under the hood, at the top left corner of the engine. Brand Introduction: Volkswagen (German: Volkswagen) is an automobile manufacturing company headquartered in Wolfsburg, Germany, and is the core enterprise of the Volkswagen Group, one of the world's four largest automobile manufacturers. In 2019, it ranked 9th in the Fortune Global 500. Body Dimensions: Taking the 2017 Volkswagen Tiguan as an example, it is a compact SUV with body dimensions of: length 4506mm, width 1809mm, height 1685mm, wheelbase 2684mm, and body weight of 1600kg. Power Specifications: The 2017 Volkswagen Tiguan is equipped with a 1.8T inline 4-cylinder turbocharged engine, with a maximum horsepower of 160PS, maximum torque of 250Nm, and maximum power of 118kW, paired with a 6-speed automatic transmission.
Was this review help?
14
3
Share
More Forum Discussions

Can a New Car Be Driven on the Highway?

New cars can be driven on the highway, but there are 4 precautions to keep in mind: 1. Do not blindly drive at high speeds on the highway. The first batch of engine oil contains many metal particles, and accelerating recklessly on the highway can increase internal engine wear. 2. The engine speed should not be too high and should be kept within 3,000 to 4,000 RPM. A newly purchased car requires a break-in period, and if the speed exceeds 4,000 RPM initially, it can cause damage to the car. 3. Avoid driving on the highway for extended periods. Continuous high-load operation of the engine can easily lead to increased wear on mechanical parts. For a new car, prolonged highway driving means high-load operation for the engine. 4. For automatic transmission cars, switch to manual mode to flexibly adjust the car's speed and reduce wear and tear.
10
5
Share

What Causes Slow Engine Coolant Temperature Rise?

Slow engine coolant temperature rise may be caused by a malfunctioning thermostat. If the thermostat is damaged and causes the coolant to remain in the major circulation loop, it will result in slower engine temperature rise. In such cases, it is recommended to check whether the thermostat is functioning properly. Below is a detailed explanation: 1. Car engines rely on coolant for heat dissipation. During engine operation, the coolant continuously circulates within the engine to remove excess heat. The coolant follows two circulation paths inside the engine: a major circulation loop and a minor circulation loop. 2. When the engine is first started and the temperature is still low, the coolant circulates in the minor loop. During minor circulation, the coolant does not pass through the engine radiator for cooling, which helps the engine warm up quickly. Once the engine reaches normal operating temperature, the coolant switches to major circulation.
19
4
Share

What Causes Steering Wheel Vibration at High Speeds in Sedans?

There are several reasons why the steering wheel of a sedan may vibrate at high speeds: 1. Wheel balance issues. A car's wheel is composed of a tire and a rim. When there is a problem with the wheel balance, it means the wheel is not in a balanced state during high-speed driving. In other words, if the wheel balance data is incorrect, the wheel's rotation center will shift, causing the wheel to vibrate, which in turn affects the steering wheel. 2. Rim problems. If the car's rim has been impacted during previous driving, causing it to deform, then during subsequent driving, the deformation of the rim can also cause the wheel to vibrate, leading to steering wheel vibration. 3. Chassis component issues. This problem is less likely to occur and is generally found in cars that have been poorly repaired after an accident. The impact from the accident can affect the chassis components, also resulting in steering wheel vibration. Although rare, it cannot be ruled out.
15
0
Share

Where do license plates starting with 'Su' belong to?

License plates starting with 'Su' belong to Jiangsu Province. Here is some information about license plates: 1. License plates, commonly known as vehicle plates, refer to the number plates hung on the front and rear of a vehicle. They are usually made of materials such as aluminum, iron, plastic, or paper, and are engraved with the vehicle's registration number, registration region, or other relevant information. 2. License plates serve as identification and information registration for vehicles. Their main function is to identify the region to which the vehicle belongs, and the owner and registration details of the vehicle can be traced based on the license plate. 3. License plate numbers can be customized, except for the first two characters which must comply with national regulations; the rest can be freely chosen.
4
1
Share

How to Turn Off the Auto Start-Stop Function in the Avancier?

The Avancier's auto start-stop function is enabled by default. To turn it off, simply press the auto start-stop OFF button (the one with a circular arrow containing the letter 'A'). This will deactivate the engine auto start-stop function. Below is additional information about the Avancier: 1. In terms of appearance, the Avancier's body looks very large. The matrix-arranged front headlights are not only attractive but also sufficiently stylish, avant-garde, and futuristic. Viewed from the rear, the sharply angled C-pillar stands out as the most eye-catching design feature of the car. The fastback design gives the Avancier not only the commanding presence typical of a midsize SUV but also a rare streamlined beauty for this type of vehicle. 2. For the interior, the Avancier's style is quite unique among Honda models in recent years. It features extensive use of soft materials and leather, large wood grain trim panels with chrome accents, a floating central control screen, and a multifunction steering wheel, all of which maintain a strong sense of technology.
13
3
Share

What are the symptoms of a blown cylinder head gasket?

When a car's cylinder head gasket is blown, it can cause the following three symptoms: 1. A blown cylinder head gasket can lead to poor cylinder sealing, resulting in engine oil leakage. 2. Damage to the cylinder head gasket can cause insufficient cylinder pressure in the engine, leading to reduced engine power. 3. Coolant from the engine may flow into the combustion chamber, causing white smoke to come out of the exhaust pipe when the engine is running. If the cylinder head gasket is damaged, it should be replaced promptly. The following precautions should be noted: 1. To replace the cylinder head gasket, the cylinder head must be removed. When installing a new cylinder head gasket, it should be tightened according to the specified torque. 2. The bolts of the cylinder head should be tightened in the prescribed sequence; otherwise, it may result in uneven pressure on the gasket, leading to poor sealing.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.