Where is the transmission oil filler port located on the Besturn B50 automatic transmission?

1 Answers
LaMason
07/30/25 10:33am
The automatic transmission oil filler port on the Besturn B50 is located on the two hex screws of the transmission. The upper part is for filling oil, while the lower part is for draining oil. Automatic Transmission: An automatic transmission is a device used to automatically change engine speed for gear shifting, which is more advanced than a manual transmission. Types of Automatic Transmission: There are four types of automatic transmissions: hydraulic automatic transmission, mechanical continuously variable automatic transmission, electronically controlled mechanical automatic transmission, and dual-clutch automatic transmission. Precautions: Too much or too little transmission fluid can damage the transmission. Excessive fluid may cause increased resistance in component operation or lead to foaming and deterioration of the transmission fluid, resulting in abnormal wear of components.
Was this review help?
9
5
Share
More Forum Discussions

What are the reasons for no hot air in the car?

Reasons for no hot air in the car: 1. Engine thermostat failure; 2. Hot water valve or hot water valve vacuum actuator failure; 3. Heater inlet or outlet pipe blockage or heater core clogged with dirt; 4. Temperature control damper or control cable damage; 5. Air conditioning blower damage or blower control circuit failure; 6. Air conditioning air distribution pipe blockage or air leakage. Car heating equipment is divided into non-independent heating systems and independent heating systems according to the heat source used. Non-independent heating systems use the residual heat of car exhaust or engine cooling circulating water as the heat source and introduce it into a heat exchanger. The fan blows the air inside or outside the car through the heat exchanger to heat it up. Independent heating systems are generally composed of a combustion chamber, heat exchanger, fuel supply system, air supply system, and control system.
17
3
Share

What are the reasons for BMW USB connection not responding?

The reasons for BMW USB not responding may be: 1. USB overload: The USB device caused an issue with the front port device. 2. Incompatible USB drive or too large capacity: (1) Generally, car USB ports are more compatible with MP3 format, so pay attention to the music format; (2) The USB drive needs to be in FAT32 format. If the USB drive is not in this format, format it to FAT32; (3) The USB drive should have a single partition with no hidden partitions. Solutions are as follows: 1. Reformat the USB drive to ensure there are no folders inside the USB directory; 2. Back up all songs to the computer before formatting, then copy the backed-up music back to the USB drive after formatting; 3. Ensure all music files are in MP3 format to be compatible with most players on the market.
7
5
Share

What is the fuel consumption per 100 kilometers of the Xingrui?

The actual tested fuel consumption of the Geely Xingrui is 7.6 liters per 100 kilometers, which is not high at all. The vehicle was in economy mode and did not have an auto start-stop function. The Xingrui requires 95-octane gasoline. After running 139.1 kilometers, the fuel cost per kilometer is only about 0.43 yuan, indicating genuinely low fuel consumption. Here is some additional information: Geely Xingrui Interior: The Geely Xingrui adopts a brand-new "Time and Space Overlapping Cockpit" design, featuring very fluid and clean overall lines. The interior uses a yacht blue and premium gray color scheme, with a flat-bottomed three-spoke multifunction steering wheel, a 12.3-inch LCD instrument panel, and a floating 12.3-inch central control screen, giving it a strong sense of technology.
17
2
Share

Is Gearbox Oil the Same as Transmission Fluid?

Gearbox oil is not the same as transmission fluid. Below are detailed explanations of the two: 1. Gearbox oil is a lubricant used to maintain the cleanliness of the gear shift system, providing lubrication to extend the lifespan of the transmission components. It offers effective lubrication even in low-temperature conditions and reduces oil loss under harsh operating conditions. Gearbox oil is added to the transmission; without it, the internal gears would experience dry friction, leading to wear and tear. Both automatic and manual transmissions require gearbox oil. 2. Transmission fluid is specifically designed for automatic transmissions. In the early days, automatic transmissions did not have dedicated fluid and instead used engine oil. Due to significant differences in operating conditions and technical requirements, the practice of using engine oil as transmission fluid was quickly phased out. Today's transmission fluid serves both as the hydraulic fluid for the torque converter and as the lubricant for the planetary gear structure and the hydraulic fluid for the shifting mechanism.
6
0
Share

How to retract a jack?

The method to retract a jack is: You need to unscrew the hydraulic valve to release the hydraulic pressure before retracting it. Turn the vent valve at the bottom counterclockwise. A loaded jack will descend automatically, while an unloaded one can be retracted by adding some weight on top or pressing down the lifting column. Self-lowering screw jacks have non-self-locking threads and are equipped with a brake. Releasing the brake allows the jack to descend quickly on its own. A jack refers to a compact lifting device that uses a rigid lifting component as the working mechanism to elevate heavy objects within a small stroke via a top saddle or bottom claw. Jacks are primarily used in factories, mines, transportation sectors, and other industries for vehicle repairs, lifting, and support tasks. They feature a lightweight yet sturdy structure, are flexible and reliable, and can be carried and operated by a single person.
8
0
Share

How Does GAC Honda Recruit Employees?

GAC Honda belongs to the automotive industry and operates as a professional 4S dealership. The entry requirements vary by position: receptionists typically need at least an associate degree (with preference given to automotive majors), sales positions require a bachelor's degree or higher, while after-sales and maintenance roles depend on practical skills—experienced technicians can join directly based on their experience, but graduates must still hold at least an associate degree. Below is relevant information about Honda: 1. Honda: Honda refers to Honda Motor Co., Ltd., the world's largest motorcycle manufacturer, with automobile production and scale also ranking among the top ten global automakers. Dongfeng Honda is not considered a Japanese car. It is a joint venture, with sales revenue shared between China and Japan, though the proportions differ. 2. Joint Venture Models: Dongfeng (Second Automobile Works) has numerous joint venture models, such as Dongfeng Citroën, Dongfeng Nissan, Dongfeng Peugeot, and Dongfeng Honda. Therefore, Dongfeng Honda is a joint venture brand—its technology is Japanese, but the 'Dongfeng Honda' brand was born and is produced in China.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.