Where is the transmission oil filler port for the Honda XR-V?

2 Answers
DiLondyn
07/25/25 9:31am
The transmission oil filler port for the Honda XR-V is located below the area between the engine and the battery, where a protruding component can be found. Below is some related information: 1. Types of transmissions used by Honda: The Honda XR-V is equipped with either a 6-speed manual transmission or a CVT transmission, both of which are proprietary to Honda. 2. Information about transmission oil replacement: The Honda XR-V requires approximately 12 liters of transmission oil for a replacement. For CVT transmissions, Honda recommends using Honda-HCF-2 transmission fluid. Using transmission fluids other than Honda-HCF-2 may affect the vehicle's transmission performance and durability, and could potentially damage the transmission.
Was this review help?
11
4
Share
ColeFitz
08/11/25 7:21pm
I once changed the transmission fluid for my Honda XRV myself, and that filler port was really hard to find! It's located on the left side of the transmission housing in the engine bay, completely blocked by the air filter box. You have to remove the entire air filter box first to see the filler hole marked with a screw symbol. Remember to use a 24mm socket wrench to open it, then slowly pour the fluid in with a long funnel. It took me two hours to figure out the location, and I still feel sore just thinking about it. The vehicle needs to be running when adding the fluid to raise the transmission temperature to around 50°C for accurate fluid level measurement. It's best to prepare a measuring cup and add according to the manual—overfilling can cause spills everywhere.
Was this review help?
7
3
Share
Expand All
More Forum Discussions

Can Regular Car Keys Be Duplicated?

Regular car keys can be duplicated. Replacing the key battery: Gently press the small switch on the back of the key to remove the mechanical key. Then, use the mechanical key to open the key cover by inserting it into the slot next to the key and gently prying it open. After removing the key compartment cover, you will see the position of the old battery. It is recommended to use a small flathead screwdriver for easier removal of the old battery. Ensure the new battery is installed with the positive side facing up. Reassemble the key cover and mechanical key, and verify that the key functions properly. Precautions for replacing car keys: The chip inside the car key contains an induction coil that can automatically charge. Different cars have different chips, so avoid mixing them up.
4
0
Share

What is the power source of new energy vehicles?

New energy vehicles are primarily powered by power batteries. Types of new energy vehicles: New energy vehicles mainly include hybrid electric vehicles (HEV), battery electric vehicles (BEV, including solar-powered vehicles), fuel cell electric vehicles (FCEV), other new energy vehicles (such as those using supercapacitors, flywheels, and other high-efficiency energy storage devices), gas-powered vehicles, liquefied petroleum gas vehicles, and hydrogen-powered vehicles. Battery types: The main types of power batteries used in new energy vehicles are: lithium-ion batteries, nickel-metal hydride batteries, fuel cells, lead-acid batteries, and supercapacitors.
19
5
Share

What is the size of a 14*2.125 tire?

14*2.125 tire refers to a tire where the number 14 indicates the width of the tire, which is 14 inches. The 2.125 refers to the inner diameter of the tire, also known as the tire width, which is 2.125 inches. Below is a detailed introduction to tires: 1. Replacement cycle: Tires should be replaced every 3 years. If the vehicle is driven 20,000 kilometers per year, replacement can be considered after 2 to 3 years. If the vehicle is driven approximately 10,000 kilometers per year, replacement should be considered after 4 to 5 years. Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must have relatively high load-bearing performance, traction performance, and cushioning performance. At the same time, they are also required to have relatively high wear resistance and flex resistance, as well as relatively low rolling resistance and heat generation. 2. Tire specifications: The international standard tire code represents the section width and aspect ratio in millimeters. It is followed by: tire type code, rim diameter (in inches), load index (allowable load mass code), and allowable speed code. For example: In 175/70-R1477-H, 175 represents a tire width of 175 millimeters, 70 indicates that the tire's aspect ratio is 70%, meaning the section height is 70% of the width, the rim diameter is 14 inches, the load index is 77, and the speed rating is H.
11
5
Share

What Causes Unstable Idle Speed in Natural Gas Vehicles?

Unstable idle speed in natural gas vehicles may be due to uneven combustion of natural gas. Specific causes: Clogged idle air jets, malfunctioning idle control devices, weak spark in individual spark plugs, poor valve sealing, intake manifold leaks, incorrect ignition timing (too early or too late), or improper idle speed adjustment. Solutions: First, adjust the idle speed. If the issue persists after adjustment, check if the idle jets and idle air jets are clogged. If clogged, clean them with gasoline or acetone and blow through with compressed air. If not clogged, stabilize the engine at a certain RPM and listen for air leaks at the intake manifold or carburetor gaskets. If leaks are found, tighten screws or adjust gasket thickness to resolve.
3
0
Share

Does coasting downhill with the clutch pressed burn the clutch?

Coasting downhill with the clutch pressed will burn the clutch. Checking the clutch: If the clutch does not disengage completely, try pressing the clutch pedal all the way down to see if you can shift gears. If the clutch components are damaged, they need to be repaired or replaced, including the friction plate, pressure plate, and release bearing. Clutch slipping: The main causes of clutch slipping are insufficient friction on the clutch friction plate; shifting gears or disengaging before the clutch is fully engaged; driving for long periods with the clutch partially engaged or coasting with the clutch pressed; and applying excessive throttle when shifting or disengaging gears before they are fully engaged, leading to abnormal wear of the clutch plate.
6
3
Share

Can a motorcycle be transferred without annual inspection?

Motorcycles cannot be transferred without annual inspection. Introduction to vehicle transfer: Vehicle transfer refers to changing the name of the vehicle owner. When buying a used car, besides checking the condition of the car, the most important step is completing the transfer procedures. Principle of vehicle transfer: Every vehicle has a fixed registration, which mainly records the owner's information, address, and some relevant vehicle parameters. Insurance transfer is required: After the vehicle transfer is completed at the vehicle management office, the new owner should bring the transfer certificate, a copy of the vehicle license, the original insurance policy, their ID card, and the original insurer's ID card to the original insurance company to fill out a transfer application form, and then the transfer procedure can be completed.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.