Where is the transmission oil dipstick of the Hongqi H7?

1 Answers
McGabrielle
07/29/25 10:23pm
The transmission oil dipstick of the Hongqi H7 is located on the transmission. The oil level of the transmission fluid may fluctuate under different operating conditions. If the automatic transmission is in a hot state (e.g., after driving at low speed for more than 5 minutes, the hydraulic oil temperature has reached 70°C to 80°C), the oil level should be near the upper limit on the dipstick. Below is the method for checking the transmission fluid: 1. Park the car on a level surface and firmly engage the parking brake. 2. Let the engine idle for more than one minute. 3. Depress the brake pedal and move the gear selector to reverse (P), drive (D), and low gears (S, L, or 2, 1), staying in each gear for a few seconds to allow the torque converter and all shift actuators to fill with hydraulic oil. Finally, move the gear selector back to the park (P) position. 4. Pull out the automatic transmission dipstick, insert the cleaned dipstick back into the filler tube, then pull it out again to check the oil level on the dipstick. 5. If the oil level is between the maximum and minimum marks, the oil level is correct. If it is below the minimum mark, add transmission fluid. If it is above the maximum mark, the transmission has too much oil, and some should be drained appropriately.
Was this review help?
18
3
Share
More Forum Discussions

What are the characteristics of electric vehicle drive motors?

Characteristics of electric vehicle drive motors: 1. Require frequent starting and stopping; 2. Withstand significant acceleration or deceleration; 3. Capable of climbing slopes with low-speed high-torque and operating with high-speed low-torque; 4. Possess rapid torque response characteristics and a wide operating speed range; 5. Able to endure high temperatures, variable climate conditions, and frequent vibrations while maintaining normal operation in harsh environments. Electric vehicle drive motors convert electrical energy from the power source into mechanical energy, which then drives the wheels through transmission devices or directly. The most widely used power source in electric vehicles is lead-acid batteries. The drive motor is the sole power source for pure electric vehicles, typically suitable for electric vehicles. Below the rated speed, the motor operates in constant torque mode, while above the rated speed, it operates in constant power mode.
16
0
Share

What Causes the Abnormal Noise in Nissan Qashqai's Steering?

The causes of abnormal noise in Nissan Qashqai's steering are: 1. Aging of the steering tie rod ball joint, replace the steering tie rod ball joint and perform a four-wheel alignment; 2. Leaking of the steering gear dust cover, replace the dust cover or reapply grease; 3. Steering gear failure, excessive gear clearance in the steering gear, requiring replacement of the steering gear; 4. Improper tension or aging of the power steering belt, adjust the belt tension or replace the belt; 5. Insufficient lubrication in the steering column causing high friction, simply add lubricating oil; 6. Noise from the rebound clip of the turn signal auto-return mechanism, this situation requires confirmation by the owner; 7. Abnormal airbag clock spring in the steering wheel, replace the airbag clock spring. The Nissan Qashqai is a compact SUV under Dongfeng Nissan, with body dimensions of 4401mm in length, 1837mm in width, 1593mm in height, and a wheelbase of 2646mm.
15
5
Share

How to Open Car Windows When the Engine is Off?

The method to open car windows when the engine is off is: simply turn the key to the ON position. At this point, the car is only in the power-on state without ignition, and the windows can be opened as long as the car has power. Car windows are openings set in the four walls of the vehicle, designed to block wind, rain, and UV rays while maintaining visibility. Most car windows are made of glass materials, primarily laminated glass, tempered glass, and zoned tempered glass, which effectively enhance the performance of automotive glass. Today, most passenger car windshields are made as a single large curved piece with certain curvatures on all sides. Due to factors such as vehicle model, strength, insulation, and assembly, the processing and fitting precision of such curved glass are extremely demanding.
20
5
Share

Under what circumstances should the S gear of Lavida be used?

The usage scenarios of Lavida's S gear: 1. Used when the car needs rapid acceleration; 2. Can be engaged when the car is overtaking or climbing a slope; 3. When driving in extremely congested road sections, engine carbon deposits will increase. Proper use of the S gear helps clean the car's carbon deposits and prolong the engine's lifespan; 4. The S gear can also be selected when using air conditioning in summer. The S gear is the car's sport mode, which improves the engine's working efficiency by altering the engine's speed and fuel injection volume, allowing the engine to maintain high-speed operation for a longer duration. The Lavida is an independently developed A-class car under Shanghai Volkswagen, with body dimensions of 4605mm in length, 1765mm in width, 1460mm in height, and a wheelbase of 2610mm.
3
5
Share

How to Remove the Wrench Symbol on the Dashboard?

Methods to remove the wrench symbol on the dashboard: 1. DIY removal: Adjust the dashboard display to show the remaining mileage, then turn off the dashboard. When turning it back on, press and hold the right control bar for 5 seconds within the first 3 seconds of the dashboard lights illuminating to remove the symbol. 2. Professional removal: After maintenance, have a professional technician at a car 4S store or repair shop reset and remove it. The appearance of the wrench symbol light on the dashboard serves as a reminder for the owner that the car requires maintenance. Typically, this light illuminates when the vehicle reaches a preset mileage, indicating it's time for a service. The specific timing varies by car model, so refer to the vehicle's user manual for accurate information.
15
2
Share

How to Use the One-Touch Window Control Function with the Santa Fe Key?

Santa Fe keys do not have the one-touch window control function. The one-touch window control buttons for the Santa Fe are located on the driver's door armrest. Press the switch to the first position and hold it until the window moves to the desired position. Press it to the second position, and the window will automatically lower. One-touch window control refers to a system where the car window glass can be controlled to move up or down to the desired position with a single press of a button. Cars equipped with one-touch window control typically have two-position window control switches. Taking the 2019 Santa Fe as an example, it is a 5-door, 6-seat SUV with body dimensions of 4930mm in length, 1910mm in width, and 1720mm in height, and a wheelbase of 2865mm.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.