Where is the transmission of the Geely Xingyue produced?

2 Answers
VonAllie
09/01/25 6:32am
Aisin is the transmission brand used in the Geely Xingyue. Founded in 1969, Aisin is a world-renowned professional developer and manufacturer of automotive automatic transmissions. In the field of automotive automatic transmissions, Aisin's products hold the highest market share globally. The Geely Xingyue is equipped with an 8-speed automatic transmission (8AT). AT transmissions are among the most common types of automatic transmissions, featuring a relatively complex structure with multiple planetary gears and clutch plates inside. The 8-speed automatic transmission carries four gear sets with only five shifting components, engaging just two components during each shift. Additionally, the newly designed axial parallel slide pump enhances transmission efficiency, minimizing energy loss. For the Geely Xingyue's transmission in daily use, the following points should be noted: Do not delay transmission fluid changes for extended periods. Although many modern vehicles feature maintenance-free transmission fluid, 'maintenance-free' does not mean 'never change.' Prolonged failure to replace the transmission fluid can lead to damage to internal components such as bearings and the housing. Avoid prolonged coasting in neutral. While driving manual transmission vehicles, many experienced drivers may coast in neutral, but for automatic transmission vehicles, this can cause overheating of the transmission and produce shocks when shifting back into Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle comes to a complete stop. Many drivers, aiming to demonstrate smooth operation, may shift into reverse while the vehicle is still moving, which can cause significant damage to the transmission gears and, over time, lead to gear grinding and other failures. Avoid frequently climbing steep slopes in Drive (D). When facing steep inclines, automatic transmission vehicles may overheat due to high load or shift prematurely, resulting in insufficient climbing power. In such cases, using manual mode to lock in lower gears or switching to sport mode can help protect the transmission. Do not tow over long distances. If an automatic transmission vehicle breaks down, it should be transported using a flatbed tow truck with the vehicle in Neutral (N) and moved onto the tow bed. Using a tow rope or directly towing the vehicle is not recommended.
Was this review help?
11
2
Share
VanJames
09/14/25 2:22am
As a car enthusiast who frequently watches car reviews, I remember that the Geely Xingyue primarily uses a self-developed 7-speed dual-clutch transmission, mostly manufactured domestically in China, specifically at Geely's factory in Hangzhou, Zhejiang. After integrating Volvo's technology, Geely has significantly improved transmission quality, with reliability comparable to foreign brands. In daily use, the transmission offers excellent smoothness, reducing fuel consumption and gear-shift jerks, benefiting from localization that lowers costs without sacrificing performance. Geely's supply chain is now mature, ensuring stable production and reducing import dependence. If you're curious about the specific model, check the vehicle manual or ask the salesperson during a test drive. The Xingyue's transmission choice reflects the technological progress of domestic automobiles.
Was this review help?
9
4
Share
Expand All
More Forum Discussions

What is the tire specification for the DL250?

The tire specification (front) for the DL250 is 110/80-17, and the tire specification (rear) is 140/70-17. Below is some relevant information about the DL250: 1. Appearance: In terms of appearance, the most striking feature of the DL250 is its large, round headlight at the front, which seems to inherit the design of Suzuki's "Big Eye 250." The iconic beak design typical of adventure bikes is also visible on the DL250. 2. Powertrain: The bike is equipped with the same inline twin-cylinder liquid-cooled engine as the GSX250R, providing ample power. Additionally, the twin-cylinder engine's vibration control is excellent, offering riders a superior riding experience.
4
4
Share

What is the function of a water-methanol injection system?

The function of a water-methanol injection system is to protect turbocharged engines by providing cooling during boost, with extremely noticeable cooling effects. Here is additional information: 1. High intake air temperature: High intake air temperature is a common issue in turbocharged vehicles. Using a water-methanol injection system can effectively reduce the intake air temperature. Lowering the intake air temperature naturally increases the oxygen content in the air, which not only improves combustion efficiency, allowing gasoline to burn more completely, but also enables an appropriate increase in turbo pressure within a reasonable range. 2. Precautions: However, since the water-methanol injection system requires the use of industrial alcohol, it is essential to ensure leak-proof installation and proper routing of the tubing to prevent accidents. Additionally, after installing the water-methanol injection system, it is necessary to pair it with a modified engine control unit (ECU) to increase turbo pressure and fuel injection. Therefore, it is important to regularly monitor the water level in the reservoir.
3
3
Share

Is the owner's ID card required for vehicle inspection?

Vehicle inspection requires the owner's ID card. Below is a relevant introduction to the documents needed for annual vehicle inspection: 1. Compulsory traffic insurance: One of the preparations for vehicle inspection is to check the validity date of the compulsory traffic insurance that includes the vehicle and vessel tax. If it has expired or will expire within three months after the inspection date, it is recommended to renew it in advance to avoid delays in the inspection. 2. Relevant documents: The ID card of the owner or the agent is required. 3. Vehicle license: The owner's vehicle license and the vehicle itself are needed. 3. Clear traffic violations: Before the inspection, check the vehicle's traffic violation records on the traffic management bureau's website. If there are any violations, handle them as soon as possible, then check online again until no violations are displayed.
7
5
Share

What Are the Effects of Water Entering the Car?

Check the severity of water entry. If it is very severe, it may involve water entering the circuits. Avoid turning on electronic devices if possible. Here is some related information about water entering the car: 1. Hazards: If water enters the car, many electronic devices inside may be affected, which can easily lead to short circuits and damage. If water enters the engine through the air intake, it can cause engine damage. The consequences of water entering the engine are very serious, ranging from requiring major engine repairs to potentially causing the engine to be scrapped. 2. Precautions: During heavy rain, it is best for car owners not to drive out and to park the car in a higher area to avoid water immersion. If water rises above the door level and enters the car after driving through water, it indicates that the vehicle has been submerged. If the car is found to be submerged, try to see if it can start. If the car can start and shows no signs of malfunction, the first step is to deal with the accumulated water inside the car.
5
4
Share

Why was the Lexus LX570 discontinued?

Lexus LX570 has not been discontinued. The LX series is Lexus' only full-size SUV model, integrating multiple innovative technologies and top-tier features, ensuring drivers have excellent control and passengers enjoy unparalleled comfort and pleasure anytime, anywhere. Below are the relevant details: 1. Exterior: The Lexus LX features bold, muscular lines, enhanced with numerous Lexus family design elements, significantly boosting its sense of luxury and refinement. The integrated spindle grille exudes a strong presence, and the full LED headlights are exceptionally sharp, equipped with all essential functions like auxiliary lighting. 2. Interior: The Lexus LX570's 12.3-inch large screen is one of the highlights of the interior. With a 24:9 aspect ratio, the screen offers fine picture quality and a simple interface design, featuring minimal menu layers and well-optimized logic. Although it is not touch-enabled, the Remote-Touch system allows for very convenient operation. 3. Performance: The Lexus LX570 is powered by a 5.7L V8 engine, significantly enhancing its off-road capabilities. Additionally, the Hill-start Assist Control system ensures smooth starts on steep and slippery surfaces, effectively preventing wheel slip or rollback, providing a more comfortable off-road driving experience.
11
1
Share

What is a Slow Car?

A slow car refers to a vehicle that has sluggish acceleration, slow response, or is driven by an unskilled driver, resulting in poor performance. Here are some solutions to prevent your car from becoming slow: 1. Regularly clean the engine crankcase: When the engine is running, high-pressure unburned gases, sulfur, moisture, nitrogen, and acidic oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls. These substances mix with metal particles from long-term wear and form sludge. Therefore, it is necessary to regularly clean the crankcase and maintain the cleanliness of the engine interior. 2. Change the engine oil regularly: Regardless of the quality grade, engine oil will degrade over time during use. To avoid malfunctions, it is important to change the oil periodically based on usage conditions and maintain the proper oil level. Therefore, using high-quality oil is essential for engine maintenance.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.