Where is the transmission of the Bestune T77 produced?

1 Answers
VanArabella
07/30/25 2:18am
The transmission of the Bestune T77 is produced in Changchun, China. The Bestune T77 is equipped with two types of transmissions: a 6-speed manual transmission and a 7-speed dual-clutch transmission. The transmission mainly refers to the car's gearbox. A manual transmission primarily consists of gears and shafts, achieving speed and torque variation through different gear combinations. An automatic transmission (AT) is composed of a torque converter, planetary gears, a hydraulic torque variation system, and a hydraulic control system, achieving speed and torque variation through hydraulic power transmission and gear combinations. The dimensions of the Bestune T77 are 4525mm in length, 1845mm in width, and 1615mm in height, with a wheelbase of 2700mm. This vehicle is equipped with a 1.2T engine across all variants, delivering a maximum output power of 105 kW and a maximum torque of 204 Nm.
Was this review help?
16
5
Share
More Forum Discussions

How to start the Sylphy when the key fob battery is dead?

Sylphy key fob battery dead starting method: 1. Press the side with the logo firmly against the push-button start switch; 2. Hold for a few seconds, then press directly to start. The Sylphy is a compact sedan under Dongfeng Nissan, with body dimensions of: length 4631mm, width 1760mm, height 1503mm, and wheelbase of 2700mm. The Sylphy is equipped with a 1.6L 122HP L4 engine, with a maximum power of 90kW and maximum torque of 155Nm. It uses MacPherson strut independent suspension at the front and torsion beam non-independent suspension at the rear.
5
0
Share

What Causes the Engine Light to Illuminate on the Car Dashboard?

The reasons for the engine light illuminating on the car dashboard are: 1. Sensor issues; 2. Poor engine maintenance; 3. Substandard fuel quality; 4. Poor combustion of the air-fuel mixture; 5. Dirty air filter in the car; 6. Damaged catalytic converter or thermostat; 7. Engine misfire. Other indicator lights on the car dashboard include: 1. Seatbelt indicator: Shows whether the seatbelt is locked; 2. Door indicator: Displays the status of each door; 3. Oil pressure indicator: Shows the oil pressure status inside the engine; 4. Coolant temperature indicator: Displays the temperature of the coolant in the engine; 5. Handbrake indicator: Shows the status of the vehicle's handbrake.
15
2
Share

How long after replacing the windshield can I drive?

You can drive approximately 12 hours after replacing the windshield. Post-replacement precautions include: 1. Do not wash the car for three days, and remove the adhesive tape fixing the windshield position after three days; 2. Try to avoid driving on excessively bumpy roads; 3. Avoid emergency braking and rapid acceleration; 4. Do not insert parking permits or other cards into the gap between the windshield and the dashboard; 5. Avoid highway driving and keep the speed below 80 km/h; 6. Do not apply window tint within seven days; 7. Do not open the windows while driving for three days. The function of the windshield is to maintain a certain level of clarity when impacted and cracked, ensuring the driver's field of vision remains unaffected and withstanding strong impacts.
14
3
Share

What is the reason for frequent scratches on the window glass when rolling up and down?

The reason for frequent scratches on the window glass when rolling up and down is: there is sand and dirt inside the window rubber seal, which causes friction when the glass moves. The solution is to replace the rubber seal or clean it. The maintenance methods for window glass are: 1. Use a soft cloth when cleaning the car; 2. Use more glass cleaner to wash the glass. The window is an important part of the entire car body, serving to meet the needs of interior lighting, ventilation, and visibility for the driver and passengers. Depending on the installation position, the glass is divided into: front and rear windshields, side windows, and door windows. The window structure is usually a curved and sealed type, with rubber sealing strips connecting the window frame and the glass on the car body.
13
5
Share

What are the reasons for the engine stalling and failing to start when hot?

The reasons for the engine stalling and failing to start when hot are: 1. Fuel injector leakage; 2. Damaged carbon canister solenoid valve; 3. Poor fuel quality; 4. Faulty intake air temperature sensor; 5. Engine carbon deposits; 6. Poor fuel quality; 7. Insufficient fuel supply pressure from the fuel pump; 8. Damaged crankshaft position sensor; 9. Faulty engine main relay. The solutions for the engine stalling and failing to start when hot include: 1. Replace the engine oil; 2. Adjust the resistance value of the crankshaft position sensor at a repair shop; 3. Replace the spark plugs or adjust the ignition voltage; 4. Reset the throttle data and adjust the central control at a repair shop.
13
4
Share

What engine does the Lynk & Co 05 use?

Lynk & Co 05 uses a Volvo engine. The Lynk & Co 05 is a compact SUV under the Lynk & Co brand. Taking the Lynk & Co 05 2020 model two-wheel drive Yao as an example, its body dimensions are: length 4592 mm, width 1879 mm, height 1628 mm, wheelbase 2734 mm, and curb weight 1738 kg. The Lynk & Co 05 2020 model two-wheel drive Yao is equipped with a 2.0T turbocharged inline 4-cylinder engine, with a maximum power of 187 kW, maximum power speed of 5500 rpm, maximum torque of 350 Nm, and maximum torque speed ranging from 1800 to 4800 rpm.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.