···
Log in / Register

Where is the Toyota M20E engine manufactured?

1 Answers
LeJordan
07/25/25 1:11pm
The Toyota M20E engine is manufactured in Japan. The method to open the trunk of a Toyota vehicle is: locate the switch below the left side of the driver's seat, press the trunk release button to open the trunk. Taking the 2020 Toyota Century as an example, its body dimensions are: length 5335mm, width 1935mm, height 1505mm, wheelbase 3090mm, and curb weight 1990kg. The 2020 Toyota Century features a front suspension of MacPherson independent suspension and a rear suspension of multi-link independent suspension. It is equipped with a hybrid system consisting of a 5.0L naturally aspirated engine and an electric motor, delivering a maximum horsepower of 280PS, a maximum power of 394kW, and a maximum torque of 460Nm, paired with an 8-speed automatic transmission.
Was this review help?
6
2
Share
More Forum Discussions

What Causes Excessive Transmission Fluid Temperature?

The reasons for excessive transmission fluid temperature are as follows: 1. High engine and coolant temperature: Affects transmission cooling, requires engine repair. 2. Clogged radiator grille: Can be cleaned. 3. Transmission clutch slipping: Generates additional heat, requires coupling repair. 4. Insufficient flow in transmission cooling oil circuit: Requires valve body repair or oil pump replacement. 5. Thermostat sticking: Requires thermostat replacement. Below is additional information about transmissions: 1. Automotive transmission (Transmission): Commonly referred to as "gearbox" in vehicles; often called "speed variator" in industrial machinery, it's a mechanical or hydraulic device for mechanical power conversion. 2. Transmission damage: 90% of transmission failures are caused by high temperature. Transmission overheating shows no obvious symptoms during use, but prolonged high temperature will cause internal seals to age and plastic components to become brittle.
9
0
Share

What are the maintenance items for a car with 120,000 kilometers?

Maintenance items for a car with 120,000 kilometers include: changing the engine oil and transmission fluid; replacing the coolant; inspecting the brake pads; deep maintenance of the lubrication system, etc. Relevant information about car maintenance is as follows: 1. Introduction: Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. Maintenance scope: Modern car maintenance mainly includes the following items: engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc.
18
4
Share

What are the hazards of installing streamers on the front of a car?

The hazard of installing streamers on the front of a car is that it may cause traffic police to mistake the vehicle for a suspicious one and intercept it. The following is an introduction to car decoration: 1. Meaning: Car decoration refers to improving the aesthetics of the car's exterior and interior by adding some accessories, which are called decorative items. 2. Interior: Car interior decoration involves altering the appearance of the car's inner roof, floor, console, and other surfaces by installing, replacing fabrics, or placing ornaments. 3. Exterior: Car exterior decoration involves adding or modifying external parts such as front and rear bumpers, body kits, and spoilers without changing the car's original functions and structure.
1
4
Share

How many points are deducted for stalling during the hill start in Subject 2?

During the hill start in the fixed-point parking exercise, stalling once deducts 10 points. Other point deduction items are as follows: After parking, if the right side of the vehicle body is more than 30 cm away from the roadside line, 10 points are deducted; if more than 50 cm, 100 points are deducted; crossing or touching the line results in a 100-point deduction. After parking, if the front bumper is not aligned with the pole line and the deviation is within 50 cm, 10 points are deducted; if the deviation exceeds 50 cm, 100 points are deducted. After parking, if the parking brake is not fully engaged, 10 points are deducted. Failing to complete the start within 30 seconds results in a 100-point deduction. Starting the engine without the gear in neutral or park results in a 100-point deduction. During the start, if the vehicle rolls back less than 30 cm, 10 points are deducted; if it rolls back more than 30 cm, 100 points are deducted. Key points for the hill fixed-point parking operation: Upon hearing the instruction for "hill fixed-point parking" (approximately 20 meters from the pole), turn on the right turn signal, steer appropriately to the right, and slowly drive the vehicle straight along the right side of the road, paying attention to the distance between the vehicle body and the right roadside line. When the vehicle is about 10 meters away from the parking pole, slowly, accurately, and steadily approach the target position. Aim accurately at the target, using a specific point on the parking pole and the windshield (or hood) (this point should be determined during practice due to differences in vehicle models and driver height). When the specific point on the windshield aligns with the parking pole, meaning the vehicle’s bumper is aligned with the parking pole line, stop immediately.
6
4
Share

What are the reasons why an automatic transmission car cannot start or ignite?

Possible issues include the steering wheel, parking gear, smart key, battery, etc. Below is an introduction related to automatic transmissions: 1. Automatic Principle: The engine's power is transmitted through the gearbox, which is also a key factor affecting fuel consumption. Generally, automatic transmissions consume 10% more fuel than manual transmissions. Whether manual or automatic, more gears mean better fuel efficiency. 2. Driving Techniques: For manual transmission cars, it is advisable to shift gears at higher RPMs. Engines are designed to operate at higher RPMs, and parameters such as dynamic balance and rotational inertia of various components are also designed with high RPMs in mind. If the engine operates for extended periods under abnormal conditions, the load and wear on internal components naturally increase, leading to frequent shaking and knocking, which can affect the engine's lifespan. Choosing 3000 RPM as the shifting point ensures that after shifting, the engine operates at around 2300 RPM, keeping it within a healthy RPM range.
10
3
Share

Can the air conditioning be left on while the car is running?

It is possible to keep the air conditioning on while the car is running, but it is not recommended to do so frequently. On one hand, it leads to higher fuel consumption, and on the other hand, idling can cause the engine to accumulate carbon deposits more easily, which may degrade engine performance over time. Tips for using air conditioning: After the car has been exposed to the sun for a long time, you should first open all four doors and the sunroof to allow air to circulate inside the car for about 3 minutes. This will quickly lower the interior temperature, making the air conditioning more effective when turned on. Using the recirculation mode blocks hot outside air, creating a sealed space inside the car, allowing the air to circulate rapidly under the effect of the air conditioning for faster cooling. Once the interior temperature has dropped, it is recommended to switch to the fresh air mode every 30 minutes to purify the air inside the car, then switch back to recirculation mode after 5 minutes. Turn off the air conditioning about 5 minutes before parking to protect the engine and save fuel. Hazards of prolonged idling: When the car is idling, incomplete combustion of gasoline produces a significant amount of carbon monoxide. The longer the idling time, the higher the concentration of carbon monoxide around the vehicle. Prolonged idling can result in extremely high carbon monoxide levels inside the car, which can lead to carbon monoxide poisoning or even death if passengers are present, potentially causing safety accidents. Therefore, it is important not to keep the windows completely closed. Instead, open them slightly to maintain air circulation between the inside and outside of the car.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.