Where is the towing hook located on the Wuling Zhiguang?

1 Answers
Eli
07/30/25 7:55am
There is a dedicated towing hook at the front of the Wuling Zhiguang, hidden inside the front bumper of the Wuling Zhiguang 6388 model. It is covered by a circular cap on the exterior, which when opened reveals the towing hook. Additional relevant information is as follows: 1. Introduction: The Wuling Zhiguang measures 3695mm in length, 1495mm in width, and 1860mm in height. The Wuling Zhiguang is a microvan independently developed by Liuzhou Wuling in collaboration with Hunan University, leveraging the advanced management expertise of SAIC Group and General Motors, along with Wuling's extensive experience in microvan manufacturing. It meets international safety and environmental standards, featuring high technology and quality. 2. Exterior: The new protruding front-end design, combined with various safety features, ensures that the Wuling Zhiguang complies with national safety collision regulations even without airbags. The new Wuling Zhiguang offers safer driving, an aesthetically pleasing and spacious exterior, and is economical and practical with ample interior space.
Was this review help?
3
4
Share
More Forum Discussions

How to Remove Rearview Mirror Glass?

Method for removing rearview mirror glass: Press the head of the mirror with your hand to lift the tail, then grab the tail and pull outward firmly to remove the rearview mirror glass. Car Rearview Mirror: The car rearview mirror is indispensable for daily driving, as it helps the driver observe various information behind the vehicle. Method for replacing car rearview mirror glass: 1. After purchasing a new mirror glass, proceed to remove the old one by pressing the head of the mirror to lift the tail, then grab the tail and pull outward firmly to remove the old mirror glass. 2. Upon receiving the new mirror glass, identify the left (L) and right (R) markings on the black plastic holder at the back of the mirror—L for the driver's side and R for the passenger side. 3. Use needle-nose pliers to strip the exposed metal wire insulation on the rearview mirror, then twist the bare copper wires with the heating wire ends and secure them with insulating tape. 4. Manually attach the metal clip at the end of the heating wire to the slot on the black plastic holder at the back of the mirror. Insert the wired mirror glass into the rearview mirror housing, adjust its position gently, and press firmly until you hear two clicks, indicating the mirror is securely installed. 5. Start the car and adjust the rearview mirror to your usual driving position.
2
2
Share

What car does the Kia logo represent?

Kia is the logo of Kia Motors, and its brands include Sportage, K3, Forte, Pegas, Rio, etc. Here are some related data introductions: 1. Taking the 2019 Sportage as an example, its body dimensions are 4460mm in length, 1850mm in width, and 1695mm in height, with a wheelbase of 2640mm, a fuel tank capacity of 58 liters, and a curb weight of 1475kg. 2. The 2019 Sportage features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.4L engine, producing a maximum horsepower of 140PS, a maximum power of 103kW, and a maximum torque of 242Nm, paired with a 7-speed dual-clutch transmission.
9
1
Share

What are the vision requirements for learning to drive?

The vision requirements for obtaining a driver's license are as follows: For applicants of large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or tram vehicles, the naked or corrected vision of both eyes must reach 5.0 or above on the logarithmic visual acuity chart. For other types of vehicles, the naked or corrected vision of both eyes must reach 4.9 or above on the logarithmic visual acuity chart. Additionally, applicants must not have red-green color blindness. These requirements align with the actual vision tests conducted during the driving school medical examination. Below is an introduction to the driver's license test content: 1. Subject 1, also known as the theoretical test or driver's theory test, is part of the motor vehicle driver's license assessment. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the test content includes the theoretical basis of driving, road safety laws and regulations, local regulations, and other related knowledge. The test is conducted on a computer, consisting of 100 questions, with a passing score of 90 or above. 2. Subject 2, also known as the small road test, is the abbreviation for the field driving skills test. The test items include five mandatory components: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve. 3. Subject 3, also known as the large road test, assesses road driving skills for motor vehicle drivers. The content varies depending on the type of vehicle being tested for, but generally includes: preparing to drive, starting, driving straight, shifting gears, changing lanes, pulling over, driving straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and nighttime driving. 4. Subject 4, also known as the theoretical test or driver's theory test. After the implementation of the Ministry of Public Security's Order No. 123, Subject 3 was divided into two parts: the road test and an additional safe and civilized driving test, commonly referred to as "Subject 4." Since this test is conducted after Subject 3, it is habitually called Subject 4, although there is no official term for it. The test consists of 50 questions, primarily in the form of case studies, images, and animations, with a full score of 100 and a passing score of 90.
7
3
Share

How to clear the tire pressure monitoring fault on Haval H6?

Haval H6 tire pressure monitoring fault clearing method is as follows: Check the tire condition and pressure. With everything normal, turn the vehicle to the ON position, open the tire settings in the vehicle settings, click to proceed to the next step, and wait for the tire pressure monitoring to initialize to clear the fault. The tire pressure monitoring indicator is a yellow symbol, an irregular circle with no seal on top, four small spikes at the bottom, and an exclamation mark inside. The tire pressure monitoring indicator light indicates abnormal tire pressure. Abnormal tire pressure is generally caused by one of the following 3 reasons: Abnormal tire pressure: Generally, an alarm will sound if the pressure is below 1.8 bar or above 3.0 bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the original data, causing the tire pressure monitoring indicator to light up. At this time, simply reset the tire pressure. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the tire pressure sensor is damaged due to impact while driving, it will also cause the tire pressure fault light to come on. For sensor damage issues, only a brand new replacement can be installed.
8
3
Share

How to Adjust Loose Disc Brakes?

Disc brakes that are too loose can be adjusted as follows: 1. Have a professional perform fine adjustments to the brakes; you can also adjust the position and travel of the brake pedal, and ensure sufficient brake fluid is added to maintain braking force. Generally, replacing the old brake fluid with new one can restore the original braking feel if the car's disc brakes are too loose. 2. Disc brakes consist of a brake disc connected to the wheel and a brake caliper at the edge of the disc. When braking, high-pressure brake fluid pushes the brake pads to clamp the disc, thereby generating the braking effect. 3. Disc brakes are sometimes referred to as rotor brakes, and they come in two types: standard disc brakes and ventilated disc brakes.
12
5
Share

What Causes the Dashboard Needles Not to Light Up?

There are several main reasons why the dashboard needles do not light up: 1. The dashboard lights may be damaged and need to be replaced promptly. 2. The power supply wiring for the dashboard is damaged, resulting in an open or short circuit. 3. The dashboard power supply fuse is blown, causing a power failure, and the dashboard will not light up. Here are some relevant details: 1. After discovering that the dashboard is not lighting up, check if it is caused by a blown fuse. If not, inspect the bulbs, and finally examine the car's wiring. 2. During daily driving, it is necessary to regularly maintain and service the car's dashboard to ensure its proper functioning. Since the dashboard is made of plastic, it can be wiped directly with a damp cloth and then dried with a dry cloth. The dashboard may accumulate dust from static electricity, so it should be cleaned frequently.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.