Where is the tow hook located on a BMW 320?

1 Answers
Arlene
07/29/25 10:50pm
There is a plastic cover on the left side of the trunk, inside which you will find a black canvas bag containing the tow hook. Here are some relevant details: 1. Purpose of the tow hook: As the name suggests, the tow hook is used for towing vehicles. It can be installed at the front or rear of the car. Generally, SUVs, trucks, and pickup trucks have the tow hook installed at the rear for towing other vehicles. 2. Precautions: Although the tow hook can be used for towing, not all vehicles are allowed to have one installed. Only vehicles that meet specific regulations can be equipped with a tow hook. Additionally, the tow hook must not protrude outside the vehicle body when installed; otherwise, it is not permitted. Illegal installation may result in fines.
Was this review help?
5
1
Share
More Forum Discussions

How Long Can You Park Temporarily on the Roadside?

Temporary parking on the roadside is acceptable for up to 5 minutes. Temporary parking refers to a brief stop on the right side of the road in the direction of traffic, on a road where parking is not prohibited, with the driver remaining in the vehicle. There are two key points to note for temporary parking: the driver must not leave the vehicle, and the duration should not be too long. Areas where parking is prohibited: Road shoulders marked with yellow no-parking lines indicate areas where roadside parking or stopping is forbidden. The length of the line indicates the scope of the no-parking zone. Yellow grid lines mark areas where parking is prohibited for any reason, typically used at intersections, entrances, and exits where temporary parking could easily cause traffic congestion. Special areas such as within 30 meters of bus stops, gas stations, emergency stations, and in front of fire stations do not allow temporary parking. Parking is not permitted at intersections, railway crossings, sharp curves, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels, or within 50 meters of such locations. No parking is allowed on road sections with separation facilities between motor vehicle lanes and non-motor vehicle lanes or sidewalks, as well as at crosswalks and construction zones.
1
2
Share

What is the reason for always having more space on the left side when reversing into a parking space?

This situation occurs when the steering wheel is turned too early. In such cases, simply adjust by turning the steering wheel to the right, following the principle of "turn towards the side with more space." Precautions for reversing are as follows: 1. There is a key point in reversing into a parking space, which is maintaining a 30 cm distance between the car body and the corner of the parking space. Once this point is identified, reversing into the space is not difficult. If the distance is greater than 30 cm, turn the steering wheel fully; if it is smaller, adjust accordingly. If it is too narrow, straighten the wheels first and then make further adjustments. During the reversing process, it is essential to stay steady and keep the speed slow, allowing time to make necessary adjustments. 2. During reversing, control the clutch properly and maintain a steady speed. A slower speed provides more time to correct any issues that may arise if a point is missed during the process. It is advisable to wear thick-soled shoes while driving, preferably travel shoes with a thin front and thick back with a slight slope. Thick soles make it easier and more stable to operate the clutch, which is particularly suitable for beginners. 3. Turn the steering wheel fully as early as possible rather than late. Turning it fully early allows for adjustments, but turning it fully late leaves no room for correction. 4. Ensure the car body is fully inside the parking space. Failure to do so may result from either missing a key point or hastily pressing the clutch and brake due to excessive speed. Therefore, controlling the speed is crucial. 5. After the car body enters the parking space, use the side mirrors to adjust the car's position. If the rear end is wider on one side, turn the steering wheel towards that side.
9
1
Share

Is Tire Pressure Monitoring Necessary for Cars?

Car tire pressure monitoring is necessary as proper tire pressure plays a crucial role in driving safety. Abnormal tire pressure may lead to serious consequences, making it essential to equip vehicles with tire pressure monitoring systems to prevent severe outcomes from undetected tire leaks. For a small number of tires with very thick sidewalls, since drivers can easily detect air leaks, the role of tire pressure monitoring is less significant for such vehicle types. Excessively low tire pressure will increase braking distance and deteriorate vehicle handling. Moreover, abnormal tire pressure not only adversely affects driving safety but also incurs additional costs and environmental burdens.
6
2
Share

What colors are available for the Chevrolet Cruze?

Chevrolet Cruze colors include: Aurora White, Flame Red, Rock Black, Glacier Blue, Titanium Gray, Bordeaux Red, Crystal Black, Ice Blue, Pearl White, and Streamline Silver. Taking the 2018 Cruze as an example, its body dimensions are: length 4666mm, width 1807mm, height 1460mm, with a wheelbase of 2700mm. The 2018 Cruze is equipped with a 1.5L naturally aspirated engine, with a maximum power of 84kW and a maximum torque of 146Nm, paired with a 6-speed automatic transmission. It features a front McPherson independent suspension and a rear torsion beam non-independent suspension.
10
1
Share

What is the reason for the failure of the Envision's auto start-stop system?

The reason for the failure of the Envision's auto start-stop system is insufficient battery charge or the need for battery replacement. Many vehicles are equipped with auto start-stop systems, which require sufficient battery charge to function properly. If the battery charge is insufficient, the auto start-stop system will not operate correctly. As a global strategic model of General Motors, the Envision's exterior design inherits the essence of the ENVISION concept car, featuring a dynamic, elegant, and bold overall styling. The front end adopts the family-style vertical chrome grille, complemented by winged intelligent xenon headlights, boomerang-shaped LED daytime running lights, and streamlined exterior mirrors, creating a sharp and dynamic visual effect.
13
4
Share

How to reset the tire pressure light on an Audi A6?

Audi A6 tire pressure light reset method: On the side of the Audi A6 dashboard, there is a fuse box cover with a red protrusion marked "RESET," which is the tire pressure reset button. To reset, turn on the ignition key, press and hold this button for about five seconds until the tire pressure light starts flashing, then release the button to complete the reset. Tire usage precautions: 1. Check tire pressure at least once a month; 2. Check tire pressure only when the tires are cold; 3. Do not reduce the increased tire pressure when the tires are hot; 4. Adjust tire pressure accordingly when the vehicle is under heavy load; 5. Avoid fast cornering and rapid acceleration; 6. Regularly check tires for abnormal wear.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.