Where is the tire pressure sensor located in a car?

2 Answers
DeHaven
07/29/25 5:11am
Car tire pressure sensors are located on the inner side of the tire. They can accurately measure the temperature and pressure inside the tire. The tire pressure monitoring sensors transmit information frames to the dashboard via wireless signals at regular intervals to the vehicle's body controller and bus. Drivers can obtain the pressure and temperature values of each tire through the dashboard display. When the pressure or temperature of a tire exceeds the alarm threshold, the dashboard can accurately display the position of the problematic tire and issue visual, audible, or text alarms. Car tires are crucial components of a vehicle, directly contacting the road surface and working with the car's suspension to absorb shocks during driving, ensuring good ride comfort and smooth driving.
Was this review help?
17
2
Share
MargaretFitz
08/12/25 8:48am
I've been driving for decades, those tire pressure sensors are right next to each tire's valve stem, mounted directly on the inner side of the rim, secured with a metal bracket in a concealed position to avoid damage from rocks or road conditions. The design places them near the valve for immediate pressure change detection, with signals wirelessly transmitted to the dashboard for alerts. During one trip, my sensor warning light came on, and upon inspection, I found the bracket on the rim had loosened—tightening it promptly fixed the issue. Regular tire pressure checks can prevent problems; if a sensor fails, it needs replacement, which significantly impacts driving safety.
Was this review help?
7
5
Share
Expand All
More Forum Discussions

What procedures should be completed at the 4S store after paying off the car loan?

After paying off the car loan, first locate the mortgage contract and contact the bank and 4S store specified in the contract to complete the mortgage release procedures at the 4S store. Here are the relevant details: Original copy of the "Motor Vehicle Mortgage Registration/Pledge Filing Application Form," with the original stamped with the mortgagee's official seal. Identity documents of the motor vehicle owner and the mortgagee. If the motor vehicle owner is an individual, provide the original and photocopy of their resident ID card or temporary resident ID card. Temporary residents must also submit the original and photocopy of their residence permit issued by the public security authorities. Motor vehicle registration certificate. Power of attorney issued by the mortgagee (the power of attorney must be stamped with the official seal). 5. The motor vehicle owner must be present in person.
6
0
Share

What are the reasons for the car not moving when the gear is engaged?

The reasons for the car not moving when the gear is engaged are as follows: Automatic transmission oil pan leakage: The fault lies in the input shaft, planetary gear set, or output shaft of the automatic transmission. The automatic transmission should be disassembled for inspection. Loose connection between the gear lever and manual valve rocker arm: Check the linkage or cable between the automatic transmission gear lever and the manual valve rocker arm for any looseness. If there is looseness, it should be reinstalled and the position of the gear lever should be readjusted. Oil pump inlet filter screen clogged: Open the oil pan and check if the oil pump inlet filter screen is clogged. If there is no clogging, it indicates that the oil pump is damaged or there is a serious leakage in the main oil circuit. The automatic transmission should be disassembled for repair.
11
3
Share

What to Bring for Driving Test Part 3?

For Driving Test Part 3, you need to bring a valid ID card, your driving record file, and the successful appointment confirmation. At the test center, you will undergo magnetic ID card verification and fingerprint authentication before being allowed to take the test. Here are some important notes about the Driving Test Part 3: Regarding fingerprint verification: If a candidate fails the fingerprint verification, they must exit the vehicle to re-register their fingerprints before rejoining the queue for the test. Retaking the test if failing: If a candidate's score falls below the passing mark during the test, the system will automatically prompt them to pull over. After completing the pull-over maneuver, the system will initiate the next test attempt. Post-test instructions: After completing all required test items and driving more than 3 kilometers, the system will automatically prompt the candidate to pull over. Upon hearing the pull-over instruction, the candidate should choose a clear curb (or solid road edge line) along the test route and complete the pull-over maneuver safely. The system will then announce the test results.
15
0
Share

When driving, should you press the clutch or the brake to slow down?

When driving and needing to slow down, first gently press the brake to reduce speed, then press the clutch when the engine RPM drops below 1000 to prevent the car from stalling. Here is relevant information about slowing down: Emergency braking: In emergency situations where the vehicle needs to stop in the shortest distance and fastest time possible, don't consider engine braking or other unnecessary actions. Simply press both the clutch and brake pedals fully to the floor. This cuts off all engine power while allowing the vehicle's ESP and ABS systems to make the wheels move in a semi-rolling, semi-sliding state, maximizing traction to bring the vehicle to a stop. Slowing down at 0km/h or very low speeds: You can directly press the clutch and use the brake to slow down. At low speeds, the gear is also low, and the engine's traction force is relatively strong. Therefore, pressing the clutch cuts off the power; if you don't disengage the clutch while slowing down, it might cause the engine to stall.
5
4
Share

What are the high-end car brands from South Korea?

South Korea's high-end car brands are Hyundai and Kia. Below are the introductions of three high-end models: Kia K9, Hyundai Equus, and Hyundai Genesis: Kia K9: The body dimensions are 5095/1900/1490mm in length, width, and height respectively, with a wheelbase of 3045mm. The Kia K9 available in the domestic market is equipped with a 3.8L V6 direct injection engine, delivering a maximum power of 246kW and a peak torque of 395N·m. Hyundai Equus: The body dimensions are 5160/1890/1495mm in length, width, and height respectively, with a wheelbase of 3045mm. The extended version has a wheelbase of 3345mm. In terms of power, there are two engine options available for consumers: 3.8L and 5.0L. Hyundai Genesis: Compared to the premium German brands, the price of Genesis is actually quite competitive. It comes with a 3.0L naturally aspirated V6 engine, Hyundai's self-developed 8AT, an electronically controlled four-wheel drive system, and more.
1
2
Share

Where is the Teana water temperature gauge?

The Teana water temperature gauge is located on the left side of the speedometer. The engine water temperature gauge is used to indicate the temperature of the engine coolant. The coolant temperature signal is provided by the engine coolant temperature sensor installed on the engine cylinder head. When the engine is operating normally, the displayed value should be between 80-100°C. If the engine coolant temperature reaches or exceeds 112°C, the coolant temperature warning light will illuminate. At this point, you should immediately stop the vehicle and turn off the engine, then check the coolant level and cooling system pipes!!
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.