Where is the Tire Pressure Reset for Haval Big Dog?

1 Answers
JamesonFitz
07/29/25 11:39am
The tire pressure reset button for Haval Big Dog is located on the menu on the left side of the steering wheel. Hazards of Overinflated Tires: Reduced friction and adhesion of tires, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates localized wear of the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overstretches tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. Sharp objects like nails or glass can easily penetrate the tire, causing internal cracks or blowouts. Hazards of Underinflated Tires: Increases friction with the road surface, leading to higher fuel consumption; Causes heavy steering and deviation, compromising driving safety; Increases movement of tire components, leading to abnormal heat generation due to excessive rolling; Weakens cord and rubber functionality, causing delamination or cord breakage, and excessive friction with the rim, damaging the bead area and causing abnormal wear; Multiplies friction with the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing strength. High-speed driving may lead to blowouts; Increases tire deformation, causing sidewall cracks and flexing movements, leading to excessive heat, rubber aging, cord fatigue, and breakage, while also enlarging the tire contact area and accelerating shoulder wear.
Was this review help?
19
3
Share
More Forum Discussions

Can the car door be opened in water?

It is very difficult to open when completely submerged in water. A car does not sink immediately after falling into water, and you can use the one and a half minutes or even two minutes before sinking to escape through the door or window. Here is an introduction to the classification of water-damaged vehicles: 1. Water level one: The water just reaches the vehicle's chassis. The vehicle floor may get damp, but the possibility of significant water ingress is low, and the impact on the vehicle's electrical equipment is minimal. 2. Water level two: The water reaches half of the wheels. Due to the vehicle's incomplete sealing, water will start to enter the interior. For lower cars, the water level inside may affect the seat adjustment motors and electrical components like heating and ventilation. 3. Water level three: The water almost completely submerges the tires. At this point, the water level inside will completely cover the seat cushions and the central armrest area, affecting a large number of electrical components.
2
5
Share

How Long Does It Take to Repair a Flooded Car?

It usually takes about a week to repair a flooded car. After repairing a water-damaged vehicle, other components may also develop issues. Therefore, car owners need to carefully observe their vehicles during daily use to prevent accidents. For instance, if warning lights for sensors flash or seats fail to move, the vehicle should be returned to the workshop for inspection and repair to ensure safe operation. Additionally, while driving, pay attention to symptoms such as unstable idling, unusually loud engine noises, or signs of rust on the car. Regular inspections should be conducted on the electrical circuits, airbags, and other mechanical components. If the car's computer board malfunctions and triggers false alarms, it can directly impact driving safety. Mechanical component inspections primarily focus on the engine. A poorly sealed engine may leak oil, leading to insufficient lubrication. Without proper lubrication, the engine can overheat, increasing the risk of severe damage like cylinder explosion. Since water-damaged vehicles often have numerous electrical hazards that are difficult to resolve all at once, owners should take their vehicles to a professional repair station for inspection and maintenance every three months within the first year after the flooding incident.
10
4
Share

How often should a car be polished and waxed?

There is no fixed cycle for car body polishing. The purpose of polishing is to better protect the car paint. Below is some relevant information about car polishing: 1. Car detailing: Car polishing is part of the car detailing process. Before waxing, sealing, or coating, the car should be polished first. This is because sealing and coating require prior polishing, and only a finely polished car can achieve a mirror-like finish. This is a necessary step for sealing. 2. Advantages: Polishing itself does not harm the car paint; on the contrary, it helps to better protect the paint. It can remove oxidized paint and various foreign substances on the car body, eliminate fine scratches on the paint surface, and treat minor damages and stains on the car paint.
10
5
Share

How Long Does It Take to Settle a Total Loss Claim for a Car?

The time it takes to settle a total loss claim depends on the insurance company, as different companies have varying contract terms regarding payout timelines. For faster companies, it may take within a month, while slower ones may take up to three months. Below are some important considerations when purchasing insurance for a new car: 1. Choosing an Insurance Company: If you are selecting car insurance on your own, the first step is to find a suitable insurance provider. Be cautious with smaller insurance companies, especially those that are not well-known. This is because filing claims with them can be difficult and time-consuming, particularly if they have limited service networks nationwide, which may cause significant delays in processing claims. 2. Selecting Insurance Coverage: When insuring a new car, choosing the right coverage is crucial. The first essential coverage is comprehensive insurance, which offers great value for money and covers minor damages like scratches and dents. Next is third-party liability insurance, which serves as a good supplement to compulsory traffic insurance—it costs slightly more but provides much better coverage. Additionally, if you don’t have a garage or a fixed parking spot, theft insurance is recommended. Other optional coverages can be selected based on your specific needs. 3. Points to Note Regarding Purchasing Methods: Nowadays, the most common ways to buy car insurance are through phone or online platforms. Both methods are significantly cheaper than traditional insurance purchases and are very convenient, allowing you to complete the process from home. You can also call the official hotline of PICC for inquiries.
9
1
Share

How far should the vehicle warning sign be placed from the car?

On regular roads, in the event of a breakdown or traffic accident, the triangular warning sign should be placed 50 to 100 meters behind the vehicle. On highways, the warning sign must be placed at least 150 meters behind the car, and in rainy or foggy conditions, this distance should be increased to 200 meters. Here is some relevant information about the triangular warning sign: 1. Definition: The triangular warning sign, also known as the triangle warning sign, is a passive reflector made of plastic reflective material. 2. Function: When a driver stops for emergency repairs due to a sudden breakdown or is involved in an accident, the reflective properties of the triangular warning sign can alert other vehicles to take evasive action, thereby preventing secondary accidents.
15
3
Share

What is the bottom light in the taillight?

The bottom light in the car taillight is the reverse light and fog light. Generally, the right side is the reverse light, and the left side is the fog light. Car fog lights are used to illuminate the road and provide safety warnings during rainy or foggy weather, improving visibility for the driver and other traffic participants. Fog lights are divided into front fog lights and rear fog lights. Front fog lights are usually bright yellow, while rear fog lights are red. The symbol for the rear fog light is slightly different from the front fog light—the front fog light symbol has downward light lines, while the rear fog light symbol has parallel lines. It is generally located on the dashboard inside the car. The reverse light is used to illuminate the road behind the car when reversing, serving as a warning to vehicles and pedestrians behind. Based on the materials used, reverse lights can be divided into gas car reverse lights and LED car reverse lights. Gas car reverse lights use halogen materials. Halogen reverse lights are technologically mature and low-cost. LED car reverse lights use LED materials, which are pollution-free, radiation-free, and have a long service life.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.