Where is the tire pressure reset button on Wuling Hongguang S?
3 Answers
The tire pressure reset button of Wuling Hongguang S is located on the side of the gear lever. With the ignition switch turned on, press and hold the switch button until you hear a beep, indicating the reset is complete. Normal tire pressure: Generally, tire shops set the car tire pressure between 2.2-2.5, but it is often roughly estimated at 2.5. However, considering the physical effect of thermal expansion and contraction, tire pressure should be lower in summer, so 2.1-2.4 is more appropriate. In winter, tire pressure should be higher, so 2.3-2.6 is more suitable. Tire pressure monitoring: The system is a type of active safety equipment. It can alert the driver in time when there are signs of danger in the tires, prompting them to take appropriate measures, thereby avoiding serious accidents. With the tire pressure monitoring system, tires can always be kept working within the specified pressure and temperature range, reducing tire damage and extending tire lifespan.
When I drove the Wuling Hongguang S on long-distance trips before, I encountered a tire pressure warning issue. I found that the reset button is located on the control panel just below the left side of the steering wheel. It's the small button next to the turn signal lever—look closely and you'll see a tire icon. You need to press and hold it for 3 seconds until you hear a beep to confirm a successful reset. A quick reminder: the car must be started for this to work. I once tried pressing it right after turning on the ignition, but it didn’t respond. It’s best to reset the system after inflating the tires to avoid inaccurate data. If you can’t find the physical button in newer models, don’t panic—it might be hidden in the dashboard settings menu. The button position varies slightly across different model years, so the most reliable way is to check the manual in the glove compartment, which has clear illustrations.
The tire pressure reset button is located on the left side of the driver's seat. Look down at the row of buttons on the steering column cover below the steering wheel on the left side, and the second button from the right with a tire pattern is the one. The vehicle must be in the power-on state to operate it. Press and hold it until the tire pressure warning light on the dashboard goes off to confirm a successful reset. After the operation, it is recommended to use a tire pressure gauge to recheck the values to ensure that the pressure of all four wheels is within the normal range. The tire pressure monitoring system of Wuling vehicles is relatively basic, and the reset button may be hidden near the glove box or on the central control air conditioning panel. This reset function is quite crucial, as false alarms from the system could affect driving judgment, so it's best to find a familiar location and remember it well.
