Where is the tire pressure reset button on Wuling Hongguang Mini?

1 Answers
MelanieRose
07/30/25 6:40am
The tire pressure reset button on Wuling Hongguang Mini is located under the dashboard. What to do if the tire pressure is insufficient: If there is no visible damage to the car's tires, you can simply inflate them to the normal tire pressure and then reset the tire pressure system. If upon inspection you find that the tire has been punctured, you should promptly drive to a car repair shop to have the tire patched before reinflating it. If the tire pressure warning appears again some time after inflating, but there is no hole in the tire, it may be due to air leakage caused by a deformed wheel rim. It is recommended to check the wheel rim and replace it if necessary. How the tire pressure monitoring system works: It uses pressure sensors installed inside the tires to measure the tire pressure, and a wireless transmitter to send the pressure information from inside the tire to the central receiver module. How the tire pressure monitoring system works: It uses pressure sensors installed inside the tires to measure the tire pressure, and a wireless transmitter to send the pressure information from inside the tire to the central receiver module.
Was this review help?
15
0
Share
More Forum Discussions

What engine does the Roewe ei6 use?

Roewe ei6 uses a 1.0T turbocharged engine with a displacement of 1500 milliliters, featuring four cylinders. Both the cylinder head and block are made of aluminum alloy, employing multi-point electronic fuel injection. Its combined maximum power reaches 228 horsepower, with a maximum torque of 622 Nm, and a maximum driving range of 705 kilometers. The Roewe ei6 is based on the Roewe i6 and features a larger trapezoidal front grille in terms of appearance, along with a redesigned front bumper and hybrid-specific badges on the front fenders. The top-end model of the Roewe ei6 is equipped with LED headlights and taillights, 17-inch ten-spoke alloy wheels, a keyless entry system, a sunroof, power-folding exterior mirrors, etc. The unique touch-controlled trunk opening function is also carried over to the new car.
3
2
Share

What brand is the transmission of the Roewe RX5 MAX?

The 1.5T automatic transmission model of the Roewe RX5 MAX is equipped with a GM 6AT transmission, which is a self-owned brand jointly developed by SAIC and GM North America. The Roewe RX5 MAX has a body length, width, and height of 4647mm, 1891mm, and 1725mm respectively, with a wheelbase of 2760mm, which is 60mm longer than that of the Roewe RX5, providing more spacious rear seating. The Roewe RX5 MAX is a new SUV under SAIC Roewe, featuring "hardcore design" and introducing the "resilient" aesthetic for the first time based on the Roewe family's rhythmic design. It offers a high-end tactile and visual perception with elements such as a multi-blade hood, floating whale-wing grille, and multi-layered full rear end.
19
1
Share

Where is the cabin air filter located in the 10th-generation Civic?

The cabin air filter in the 10th-generation Civic is located inside the glove compartment on the passenger side. To replace the cabin air filter, you need to open the glove compartment. There is a damper on the right side that must be removed first. After removing the damper, there are two limiters on the inner side of the glove compartment. You need to squeeze them inward to remove the glove compartment. The 10th-generation Civic is a vehicle launched by Dongfeng Honda, offering multiple models to cater to the tastes of consumers in different countries, including a three-door hatchback, a hardtop coupe, a hybrid version, and a five-door sedan version. The Honda Civic launched in the domestic market shares the same production platform as Dongfeng Honda's existing model, the Honda CR-V, and both vehicles use the same chassis. This provides the technical prerequisites for the domestic production of the Honda Civic.
11
0
Share

How to activate the one-touch window lift for Volkswagen Santana?

Steps to activate the one-touch window lift for Volkswagen Santana: 1. Locate the window lift button on the left side of the driver's position, press and hold the button until the window is fully raised; 2. After the window is fully closed, continue holding the button for approximately 2 to 5 seconds; 3. When you hear a 'click' sound, it indicates that the car's programming is complete; 4. At this point, you can release the button to achieve one-touch window lift. The Volkswagen Santana is a sedan, a brand car produced by the German Volkswagen company in California, USA. The car has a length of 4546 mm, a width of 1710 mm, a height of 1427 mm, and a wheelbase of 2458 mm. The Santana is equipped with four standard three-point seat belts, and the middle seat in the rear row has a two-point seat belt. It also provides two airbags for the front passengers.
19
4
Share

What Transmission Does the Honda Accord Use?

The transmission brand used in the Honda Accord is Honda. Honda's first automatic transmission was introduced in 1973, which had only 2 gears and was called the H2. The first-generation Civic became the first model equipped with the H2, followed by the first-generation Accord and Prelude, which also featured the H2 transmission. The Honda Accord uses an automatic transmission, specifically a CVT (Continuously Variable Transmission) and an E-CVT (Electronic Continuously Variable Transmission). Unlike traditional automatic transmissions with fixed gears, a CVT does not have specific gear ratios. While it operates similarly to an automatic transmission, the way it changes speed ratios differs from the gear-shifting process of a conventional automatic transmission. When using the Honda Accord's transmission in daily driving, pay attention to the following points: Do not delay transmission fluid changes for extended periods. Prolonged neglect can damage internal components such as bearings and the transmission housing. Avoid coasting in neutral for long durations. While some experienced drivers of manual transmissions may coast in neutral, doing so in an automatic transmission vehicle can cause overheating and create a noticeable jolt when shifting back to Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle comes to a complete stop. Some drivers attempt smooth gear changes by shifting into reverse while still moving forward, but this severely damages transmission gears and may lead to gear grinding or other failures over time. Avoid frequently climbing steep hills in Drive (D). Automatic transmission vehicles may overheat under heavy loads or shift too early, resulting in insufficient power for hill climbing. In such cases, use manual mode to lock in lower gears or switch to Sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, use a flatbed tow truck to transport it while the transmission is in Neutral (N). Never tow it directly with a rope or similar method, as this can damage the transmission.
6
2
Share

What are the symptoms of insufficient oil in a manual transmission?

Manual transmission oil deficiency symptoms: 1. The transmission may produce abnormal noises; 2. Difficulty and roughness in gear shifting; 3. Vehicle jerking during gear changes. Transmission oil serves functions such as cleaning, lubrication, cooling, and sealing for the transmission, maintaining the cleanliness of the gear system, and lubricating and prolonging the life of the transmission components. Precautions for manual transmission maintenance: 1. Avoid coasting in neutral gear; do not shift the gear lever to N while driving. It is recommended to use S gear or a low gear in manual mode when going downhill to utilize engine braking, preventing thermal degradation of brake pads due to prolonged braking, which can impair braking performance; 2. Do not forcibly shift to neutral. While driving, some drivers may shift to neutral directly upon seeing a red light ahead. Although pressing the clutch makes it easier, some may shift to neutral directly, which can damage the transmission. Therefore, avoid forcibly shifting to neutral; it's better to press the clutch when shifting; 3. Regularly check the oil level. The method for checking automatic transmission oil differs from engine oil. Engine oil is checked when the engine is cold, whereas transmission oil should be preheated to about 50 degrees Celsius, and the gear lever should be shifted through all gears, pausing for 2 seconds in each before placing it in park.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.