Where is the tire pressure reset button on the Wuling Rongguang V?

Does touching the line with the mirror during the reverse parking in Subject 2 result in failure?

Touching the line with the mirror (rearview mirror) during the reverse parking in Subject 2 does not result in failure, as long as the body or wheels of the vehicle do not touch the line. According to the "Motor Vehicle Driver Training and Examination Syllabus," as long as the vehicle body does not exceed the ground markings during reverse parking, no points will be deducted. The rearview mirror is protruding, so whether it is considered part of the vehicle body depends on how the local examination centers identify the rearview mirror. Point deductions for reverse parking include: not following the designated route or sequence (100 points deducted), the vehicle body crossing the line (100 points deducted), failing to complete the parking (100 points deducted), and stopping midway (100 points deducted). The rules for the Subject 2 driving test state that if the vehicle stops midway, rolls back, or does not follow the voice prompts during the test, it will result in failure. Additionally, if the wheels or body of the vehicle touch the line, the test will also be considered a failure. Many learners encounter issues with touching the line during Subject 2 training, and "touching the line" is the most common reason for failing. The main cause of wheels touching the line is learners not mastering the correct timing for steering. Apart from missing the right moment to steer, another reason could be the steering speed not matching the vehicle's speed. Subject 2 point deduction standards: Not wearing a seatbelt: 100 points deducted. Starting the engine without the gear in neutral: 100 points deducted. Not using turn signals (including when starting, changing lanes, overtaking, turning, or parking by the roadside); using turn signals for less than three seconds (this is easily overlooked!); forgetting to turn off the turn signal or using it incorrectly: 10 points deducted. Stalling once: 10 points deducted. Reverse parking: Not following the designated route or sequence: 100 points deducted. Vehicle body crossing the line: 100 points deducted. Failing to complete the parking: 100 points deducted. Before reversing, if the two front wheels do not pass the control line: 100 points deducted. Exceeding the 210-second time limit: 100 points deducted. Stopping for more than 2 seconds midway: 5 points deducted each time. Hill start and stop: After stopping, if the front bumper of the vehicle is not aligned with the pole line and exceeds 50 cm forward or backward: 100 points deducted. After stopping, if the front bumper is not aligned with the pole line but does not exceed 50 cm forward or backward: 10 points deducted. After stopping, if the start time exceeds 30 seconds: 100 points deducted. Wheels touching the road edge line while driving: 100 points deducted. Rolling back more than 30 cm when starting: 100 points deducted. After stopping, if the vehicle body is more than 50 cm from the road edge line: 100 points deducted. Not pulling the parking brake tightly after stopping: 10 points deducted each time. After stopping, if the vehicle body is between 30 cm and 50 cm from the road edge line: 10 points deducted each time. Rolling back between 10 cm and 30 cm when starting: 5 points deducted each time. Parallel parking: After parking, if the vehicle body crosses the line: 100 points deducted. Not using or incorrectly using turn signals when parking: 10 points deducted. Exceeding the 90-second time limit: 100 points deducted. Touching the parking space boundary line while driving: 10 points deducted each time. Wheels touching the lane boundary line while driving: 10 points deducted each time. Stopping for more than 2 seconds midway: 5 points deducted each time. 90-degree turn: Wheels touching the road edge line: 100 points deducted. Not using or incorrectly using turn signals during the turn, or not turning off the turn signal after the turn: 10 points deducted. Stopping for more than 2 seconds midway: 5 points deducted each time. Curve driving: Wheels touching the road edge line: 100 points deducted. Stopping for more than 2 seconds midway: 100 points deducted. Not driving in second gear or higher: 5 points deducted.

4

0

Share

What are the causes of abnormal noise when starting a car?

Reasons for abnormal noise when starting a car: 1. Engine temperature is too low: During cold starts, the engine temperature is too low to function properly; 2. Thermal expansion of the car's three-way catalytic converter: If there is abnormal noise when the car is first started, but it disappears after a while, this is caused by thermal expansion of the three-way catalytic converter and is a normal phenomenon; 3. Transmission failure: One of the reasons for abnormal noise when starting a car is a transmission failure, which causes internal gears to rub and produce noise; 4. Wear of the engine belt or chain: If the engine belt or chain is worn, it can also cause friction or abnormal noise due to idling when starting the vehicle.

20

3

Share

What transmission does the Hyundai Verna use?

Hyundai Verna uses a 5-speed manual and 4-speed automatic transmission, which are domestically produced transmissions. The Hyundai Verna is equipped with a 1.4L naturally aspirated engine, with a maximum power of 70kw, maximum horsepower of 95Ps, and peak torque of 132Nm. It employs multi-point fuel injection technology, with a maximum power speed of 6000 rpm and maximum torque speed of 4000 rpm. The overall design of the Hyundai Verna is youthful and simple, making it an aesthetically pleasing model among its peers. It features dual barrel instrument clusters paired with a trip computer, and a three-spoke steering wheel with silver trim panels at the bottom. It comes with an 8-inch touchscreen that supports CarPlay, CarLife smart connectivity, and a voice control system.

1

3

Share

How to Determine if the Throttle Body Needs Cleaning?

To determine if the throttle body needs cleaning, check whether the car accelerates stably. For any fuel-injected vehicle, when the engine is under no load, shift to neutral and press the accelerator pedal to raise the RPM to 3000, then suddenly release the pedal. Observe where the tachometer needle falls to make the judgment. Notes on throttle body cleaning: 1. If the needle quickly drops to 1000-1200 RPM, pauses slightly, then drops to 800 RPM where the idle stabilizes, the throttle body is completely normal; 2. If the needle drops directly to 800 RPM, the throttle body is slightly dirty but still basically normal and may not need immediate cleaning; 3. If the needle drops below 700 RPM and then slowly rises back to 800 RPM with unstable idle, the throttle body is severely dirty and requires immediate cleaning.

6

0

Share

Do automatic transmission cars need to use the handbrake?

Automatic transmission cars require the use of the handbrake. It is a good driving habit to engage the handbrake in any parking situation, especially when parking on a slope. Properly applying the handbrake can prevent the car from rolling and does not affect the performance of the P (Park) gear. The handbrake must be engaged when parking and turning off the engine. At traffic lights, you can also use the handbrake to relieve foot fatigue. When using a mechanical handbrake, avoid pulling it too tight, as prolonged excessive force can cause the handbrake to become loose or the cable to break. It is best not to park on a slope with the handbrake engaged for extended periods, as this can lead to wear on the handbrake cable. If you need to park on a slope for a long time, you can place a brick under the tire facing the downhill direction after engaging the handbrake to help secure the car and reduce the pressure on the handbrake.

9

3

Share

How Often Should New Car Tires Be Replaced?

New car tires generally need to be replaced every 4 to 5 years or after driving 60,000 to 80,000 kilometers. Once this time frame or mileage is reached, the rubber in the tires begins to age, increasing the risk of damage or blowouts if they continue to be used. Factors that can shorten tire lifespan include: 1. Overinflation or underinflation—both can damage tires and affect vehicle performance; 2. Frequent acceleration and hard braking while driving, which accelerates tire wear—thus, it's advisable to slow down in complex road conditions; 3. Prolonged overloading or uneven loading of the vehicle, which places extra stress on the tires and speeds up tread wear.

3

2

Share

Where is the tire pressure reset button on the Wuling Rongguang V?

Does touching the line with the mirror during the reverse parking in Subject 2 result in failure?

What are the causes of abnormal noise when starting a car?

What transmission does the Hyundai Verna use?

How to Determine if the Throttle Body Needs Cleaning?

Do automatic transmission cars need to use the handbrake?

How Often Should New Car Tires Be Replaced?

How to Remove the Wrench Icon on the Dashboard?

What to Do When the Dashboard Thermometer Light Comes On?

What does ECM mean in a car?

What does it mean when the dashboard shows a red battery icon?