Where is the tire pressure reset button on the Mitsubishi Outlander?

2 Answers
LeIsaac
07/28/25 5:10pm
The tire pressure reset button on the Outlander is located near the air conditioning vents. The rightmost button among the three is the reset button. Owners can refer to the user manual for guidance. Tire Pressure Reset: Tire pressure reset is an operation to reset the tire pressure monitoring system after addressing a tire pressure fault. Tire Pressure Reset Method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button. Release the button after hearing a "ding" sound. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the dashboard warning light will turn off, indicating the tire pressure reset is complete. What to Do If Tire Pressure is Low: If no visible damage is found, simply inflate the tire to the normal pressure and reset the tire pressure system. If a puncture is detected during inspection, drive to a tire repair shop promptly for a patch, then reinflate the tire. If the low tire pressure warning reappears some time after inflation without any puncture, it might be due to air leakage caused by a deformed wheel rim. In this case, it is advisable to inspect the wheel rim and consider replacing it.
Was this review help?
13
1
Share
KimberlyLynn
08/11/25 11:36pm
I've been driving a Mitsubishi Outlander for several years, and the tire pressure reset button is usually not hard to find. It's located on a small button panel below the steering wheel on the left side, with the exact position depending on the model year. Older models often have a button marked TPMS on the edge of the dashboard, while newer versions might integrate it into the central control screen menu. The operation is quite simple: if the tire pressure light comes on, first adjust the tire pressure back to the normal value, then press and hold the reset button for a few seconds until the light goes off. Remember to ensure the car is stationary before resetting to avoid false alarms. Once, after changing a tire, the light came on, and pressing the button fixed it immediately. If you can't find it, check the owner's manual—it has diagrams to save you time from guessing. In short, the location varies but is generally around the driver's control area.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

What is the tire model of the Sagitar?

The tire model of the Sagitar is 205/60R16. Tires are circular elastic rubber products installed on various vehicles or machinery for ground rolling, typically mounted on metal rims. The Sagitar is a compact 4-door, 5-seater sedan with body dimensions of 4753mm in length, 1800mm in width, and 1462mm in height, with a wheelbase of 2731mm and a fuel tank capacity of 50L. The Sagitar is equipped with a 1.2T turbocharged engine and a 5-speed manual transmission, delivering a maximum power of 85 kW and a maximum torque of 175 N·m. It features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension employing a multi-link independent suspension.
1
3
Share

What is the AUX in a car used for?

AUX is an audio input interface. The basic working principle of the AUX interface is that after connecting to the AUX interface, audio from electronic devices can be transmitted through the headphone jack and AUX interface to the car audio system, allowing the audio to be played through the car's audio broadcasting facilities. The USB interface can be used to insert a USB drive for audio playback. To use it, connect one end to the AUX interface and the other end to devices like smartphones, MP3 players, or MP4 players. This allows you to listen to songs or niche music anytime, anywhere, without being limited to car music CDs. However, if the playback device runs out of power, the music will stop (the interface is typically a 3.5mm standard headphone jack). Aux is short for Auxiliary, which refers to an additional signal line design. In general audio equipment, besides the standard output and input terminals, there are often several terminals labeled Aux, serving as backup connection points. These can be used for special applications, such as additional audio output or input. Such backup terminals or lines, whether for input or output, are collectively referred to as Aux. Function: The AUX port is an asynchronous port, mainly used for remote configuration, dial-up connections, or connecting to a MODEM via a transceiver. It supports hardware flow control. The AUX port and CONSOLE port are usually placed together because they are suited to different configuration environments. The AUX interface establishes a command-line connection between the user and the device, enabling operations that are typically impossible in user mode, such as initialization, restoring default settings, or correcting abnormal user modes. It provides a fixed port for the device, which can function as a standard asynchronous serial port with a maximum speed of 115200bit/s. Using the AUX interface, remote configuration and line backup for hardware products can be achieved. Note: When using the AUX interface, make sure to buy the correct connecting cable and avoid plugging the audio cable into the wrong port. It's best to follow the steps outlined in the product's user manual. If you're still unsure, you can consult the product's official website or call for assistance.
2
4
Share

What is the 0-100 km/h acceleration time of the Porsche Taycan?

The 0-100 km/h acceleration time of the Porsche Taycan varies by model: 1. The rear-wheel-drive version accelerates from 0-100 km/h in 5.4 seconds; 2. The Turbo version achieves it in 3.2 seconds; 3. The 4S model completes it in 4 seconds; 4. The Turbo S accomplishes it in 2.8 seconds. The Porsche Taycan is a mid-to-large-sized 4-door, 4-seater sedan with body dimensions of 4963mm in length, 1966mm in width, 1395mm in height, and a wheelbase of 2900mm. The Taycan is equipped with a permanent magnet or synchronous 409-horsepower single motor and a 2-speed automatic transmission. The rear motor delivers a maximum power of 300 kW and a maximum torque of 345 Nm. It features a rear-engine, rear-wheel-drive layout, with a double-wishbone independent front suspension and a multi-link independent rear suspension.
8
4
Share

Should Car Window Tint Be Applied Inside or Outside?

Car window tint should be applied inside, including the front windshield tint, rear windshield tint, side window tint, and quarter window tint. The reasons for applying tint inside are: 1. It won't be exposed to wind and rain, slowing down the aging process and extending its service life; 2. The tint film won't be subject to significant external interference during use, avoiding scratches and damage. The functions of window tint are: 1. Blocking UV rays to reduce aging of car interiors; 2. Creating a private space; 3. Preventing injuries to drivers and passengers from accidental glass breakage; 4. Heat insulation and sun protection to reduce interior temperature; 5. Enhancing aesthetics; 6. Reducing air conditioning consumption; 7. Reducing glare.
12
0
Share

How to Open the Lavida Car Key?

The method to open the Lavida car key is: 1. Place the key horizontally, hold both sides of the key with both hands, and pull outward firmly; 2. Release the key head to open it. The Lavida is a compact 4-door, 5-seat sedan with body dimensions of 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. It is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm. The drive system is front-wheel drive, with a front suspension using a MacPherson independent suspension and a rear suspension using a torsion beam non-independent suspension.
4
5
Share

Is it necessary to install door edge guards?

Installing door edge guards is necessary. Door edge guards are made of rubber or natural rubber materials and belong to the category of exterior vehicle decorations. They are typically installed on the side waist of the vehicle body or on the bumper, primarily serving to protect the vehicle body from scratches. The installation method for door edge guards is as follows: 1. Open the door and locate the protruding areas prone to collisions; 2. Rinse the car with water and dry the area where the edge guard will be attached with a towel; 3. Slowly peel off the backing adhesive; 4. Align the position and press gently to ensure the guard fully adheres to the car surface; 5. Avoid washing the car within 48 hours after installation to prevent the adhesive from getting wet and losing its bonding strength.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.