···
Log in / Register

Where is the tire pressure reset button on the Haval Big Dog?

4 Answers
DaniellaMarie
08/26/25 3:18am

Haval Big Dog tire pressure reset button is located in the menu on the left side of the steering wheel. Tire pressure refers to the air pressure inside the tire, and the level of tire pressure plays an important role in the performance and power of the car. The method for resetting tire pressure is as follows: First, turn on the ignition switch, press and hold the tire pressure monitoring reset button until you hear a "beep" sound, then release it. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the original data, and finally the dashboard warning light will turn off, indicating the tire pressure reset is complete. The solutions for insufficient tire pressure are as follows: If no damage is visible, you can directly inflate the tire to normal pressure and reset the tire pressure system; If the tire is found to be punctured during inspection, drive to a tire shop promptly for repair and then reinflate; If the tire pressure warning appears again some time after inflation, but there is no puncture, it may be due to air leakage caused by a deformed wheel rim. It is recommended to check the wheel rim and replace it if necessary.

Was this review help?
15
2
Share
OJulia
09/08/25 3:45am

The tire pressure reset button in the Haval Dargo is typically located on the left-hand control panel of the steering wheel, integrated within the button cluster beneath the dashboard. Specifically, it's positioned near the door side, marked with a small tire or air pressure symbol. When I drive the Dargo, I always ensure all tire pressures are correctly adjusted (e.g., 220-230 kPa) before resetting, otherwise the system may trigger false alarms. The operation is straightforward: after parking and starting the engine, press and hold the button for a few seconds until the dashboard indicator light turns off. This reset is frequently used after tire changes or seasonal shifts to allow the system to relearn data and prevent false alerts that could affect driving mood. Remember the importance of the tire pressure monitoring system—it helps avoid blowout risks, and regular maintenance enhances vehicle performance and fuel efficiency. I make it a habit to check tires periodically for optimal upkeep.

Was this review help?
6
5
Share
Expand All
Andres
10/22/25 3:48am

With years of driving experience, I can tell you that the tire pressure reset button for the Haval Big Dog is usually located in the lower left area of the steering wheel. Feel around carefully, and you'll find a dedicated tire pressure button in a fairly noticeable position. To reset, first park the car securely and ensure all tire pressures meet the standard. Then press and hold the reset button for two to three seconds until the dashboard light goes off—that means it's done. This process refreshes the system's memory, preventing false warning lights after inflation. I believe the reset is crucial for driving safety, as incorrect tire pressure can lead to uneven tire wear or skidding, especially before long trips. Always pay attention to your tires' condition; proper pressure saves fuel and reduces noise.

Was this review help?
12
5
Share
Expand All
StDelilah
12/05/25 4:12am

I find it convenient to drive the Haval Big Dog. The tire pressure reset is usually controlled by the buttons on the steering wheel, and sometimes you need to navigate through the central control settings. Operation: After starting the car, press the left and right buttons on the steering wheel to enter the menu and find the tire pressure-related option, then click reset to confirm. The location is not difficult to find, and the manual provides diagrams for assistance. After resetting, the system automatically calibrates to ensure the accuracy of the tire pressure warning, which makes driving much more reassuring. By the way, maintaining the tire pressure at the recommended value can improve the handling feel.

Was this review help?
12
5
Share
Expand All
More Forum Discussions

What Causes the Diesel Engine Malfunction Light to Illuminate?

Reasons for the engine malfunction light to illuminate: 1. Sensor damage, poor contact, or signal interruption causing the engine malfunction light to turn on. 2. Poor engine maintenance leading to the engine malfunction light. 3. Low-quality fuel and engine oil causing abnormal engine operation, which in turn triggers the engine malfunction light. 4. Issues such as faulty spark plugs, ignition coil failure, fuel pump malfunction, or clogged fuel lines. 5. Regularly clean the car's air conditioning filter, as neglecting this can affect the vehicle's air intake, potentially leading to blockages over time and, in severe cases, causing the engine malfunction light to illuminate.
18
0
Share

How long is the transmission warranty for the Volkswagen Magotan?

Volkswagen Magotan transmission warranty is 3 years or 100,000 kilometers. The functions of the transmission are: 1. Change the transmission ratio; 2. Expand the torque and speed of the driving wheel; 3. Enable the car to drive backwards; 4. Facilitate gear shifting or power output of the transmission. Taking the 2020 Volkswagen Magotan as an example, it is a mid-size car with a body size of 4865mm in length, 1832mm in width, 1471mm in height, a wheelbase of 2871mm, and a body weight of 1445kg. The 2020 Volkswagen Magotan is equipped with a 1.4T turbocharged engine, with a maximum horsepower of 150PS, a maximum torque of 250Nm, a maximum power of 110kW, and is matched with a 7-speed dual-clutch transmission.
1
3
Share

What are the symptoms of excessive differential clearance?

Excessive differential clearance symptoms include: 1. Abnormal noises from the vehicle, which may lead to complete immobilization in severe cases; 2. Difficulty in turning the tires, accelerating their wear and causing serious mechanical damage. Differentials are categorized into: mechanical differentials, friction plate differentials, cam slider differentials, Torsen differentials, electronic limited-slip differentials, and differential locks. The function of a differential is: when a vehicle's drive wheels experience slippage, the limited-slip differential controls the power output to both wheels, preventing the slipping wheel from continuing to spin, thereby ensuring sufficient power to propel the vehicle forward. It is an improved type of differential that limits wheel slip, allowing a certain range of speed difference between the two drive wheels to maintain normal driving performance such as turning.
3
5
Share

Do You Need to Press the Clutch and Brake When Decelerating a Car?

When decelerating a car, you don't need to press the clutch. Many experienced drivers believe that pressing the clutch to cut off the car's power will make braking faster, but this is incorrect. If the car is moving at a relatively low speed, pressing the clutch will result in the car coasting at a slower speed, and the speed can quickly decrease after shifting gears. However, if the car is moving at a higher speed, pressing the clutch first may lead to serious consequences. Relevant information about the clutch is as follows: 1. Introduction: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. 2. Friction Clutch: The friction clutch is the most widely used and historically oldest type of clutch. It basically consists of four parts: the driving part, the driven part, the pressing mechanism, and the operating mechanism.
14
2
Share

What are the impacts of scratching the car chassis?

The impact of scratching the car chassis is a reduction in the vehicle's lifespan and a threat to driving safety. The chassis structure consists of the transmission system, running system, steering system, and braking system. It adopts an independent suspension system, which can be further divided into different structural forms such as transverse arm type, longitudinal arm type, multi-link type, candle type, and MacPherson suspension system. The maintenance methods for the chassis include: 1. Regularly check the condition of the car tires; 2. Periodically clean and wipe the car chassis; 3. Promptly inspect the operation of various components during the car's movement; 4. Regularly maintain and inspect the car's shock absorbers.
6
2
Share

What Causes the Diesel Engine Preheat Light to Stay On?

The engine glow plug indicator light typically does not stay illuminated; it should turn off after startup. If the warning light remains on, it indicates that the vehicle has logged a fault code. In this scenario, as long as the ECU (Engine Control Unit) remains powered, the fault code will be recorded. Visiting a 4S dealership and using a diagnostic scanner can help identify the specific fault code and its corresponding issue. It is recommended to seek repair services at a 4S dealership. Related information about preheating: 1. Reason: After prolonged parking, the engine oil flows back to the oil pan at the bottom of the engine. Thus, upon ignition, the upper part of the engine operates without lubrication. It takes approximately 30 seconds after starting for the oil pump to circulate oil to critical components such as the pistons, connecting rods, and crankshaft. 2. Risks of Skipping Preheating: Within the first minute of a cold start, the engine RPM (revolutions per minute) will drop significantly. Driving without proper preheating can accelerate engine wear and tear.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.