Where is the tire pressure reset button on the 2020 Highlander?

1 Answers
VonMalachi
07/29/25 12:39pm
The tire pressure reset button on the 2020 Highlander is located on the left-hand control lever. Tire pressure reset method: To reset the Highlander's tire pressure warning light: Turn on the ignition, when the TPWS indicator light is on, press the TPWS SET button for 1-2 seconds, then release the SET button after the TPWS indicator light turns off. The tire pressure warning light will then be reset. Principle of the tire pressure monitoring system: The tire pressure monitoring system detects air pressure by measuring wheel circumference through ABS sensors. This means that after tire reset, the system requires driving at least 15-20 kilometers before it functions normally. If a tire loses air rapidly (e.g., complete deflation within less than 1 kilometer), the tire pressure monitoring may not issue an immediate warning - it would take about 20 kilometers of driving before the alarm activates. Therefore, this is not a direct warning system but rather an indirect alert mechanism. Regular manual inspection of tire conditions is still recommended.
Was this review help?
10
2
Share
More Forum Discussions

What are the reasons for the black screen on the Envision's dashboard?

The reasons for the black screen on the Envision's dashboard could be a loose or poorly connected wiring harness plug, or a blown dashboard fuse. Many cars now use full LCD dashboards, which are essentially display screens. Full LCD dashboards can display more information and have a more visually appealing effect, making them a popular feature among many car owners. The Envision is General Motors' new global strategic model, with dimensions of 4686mm in length, 1839mm in width, and 1660mm in height, and a wheelbase of 2750mm. In terms of interior, the Envision continues Buick's tradition of high-quality interior craftsmanship and introduces a newly designed 10-inch high-definition touchscreen to enhance the technological feel. The vehicle also features front-row multi-function seats, rear-row sliding seats with adjustable backrest angles, a split-type oversized central storage box, a heated steering wheel, and a two-piece oversized panoramic sunroof.
17
2
Share

What is the fuel tank capacity of the Besturn B50 in liters?

The fuel tank capacity of the Besturn B50 is 58 liters. General classification of fuel tanks: Fuel tanks can be divided into two types: open tanks and closed tanks. Open tanks have a liquid surface that communicates with the atmosphere, and an air filter is installed on the tank cover. Open tanks have a simple structure, are easy to install and maintain, and are commonly used in hydraulic systems. Closed tanks are generally used for pressurized tanks, filled with a certain pressure of inert gas, with an inflation pressure of up to 0.05MPa. Classification by tank shape: They can also be divided into rectangular tanks and cylindrical tanks. Rectangular tanks are easy to manufacture and convenient for placing hydraulic components, so they are widely used; cylindrical tanks have high strength, are lightweight, and easy to clean, but they are more difficult to manufacture and occupy more space, often used in large metallurgical equipment.
1
4
Share

What is the external dimension of the vehicle license?

The size of the motor vehicle license photo is 88mm in length, 60mm in width, with a corner radius of 3mm. The following are the conditions for obtaining a driver's license: 1. Height: The height must meet the requirements of the vehicle type. 2. Vision: The vision must not be colorblind. 3. Hearing: Normal hearing. 4. Limbs: The limbs, torso, and thumbs of both hands must be sound, and each hand must have at least three other sound fingers. 5. Motor function: Normal motor function of the upper and lower limbs. The following are additional materials required for applying for a driver's license: 1. Colored photos: Seven one-inch white background colored photos. 2. Application fee: Cash, card payment, or bank transfer. 3. Copy of ID card: A copy of the ID card is required, with both sides copied onto a single sheet of paper. 4. Copy of household registration: For non-local residents, a residence permit is also required.
8
3
Share

What Type of Gasoline Should a BMW 530 Use?

BMW 530 uses 95-octane gasoline. Below is relevant information about 95-octane gasoline: Definition: 95-octane gasoline consists of 95% isooctane and 5% n-heptane. High-compression engines can also use lower-octane gasoline, but one should not blindly choose gasoline based solely on compression ratio. Instead, follow the manufacturer's recommendations. Differences from 92-octane gasoline: The primary distinction lies in the octane rating, with no other fundamental differences. 95-octane gasoline is composed of 5% n-heptane and 95% isooctane, while 92-octane gasoline consists of 8% n-heptane and 92% isooctane. 95-octane gasoline has a higher octane rating than 92-octane gasoline. In terms of stability, 95-octane gasoline burns more easily and delivers greater power output compared to 92-octane gasoline.
11
3
Share

Are There Any Cases Regarding Ford Focus Engine Overheating Issues?

There are cases regarding Ford Focus engine overheating issues. Below is a brief introduction to a Ford Focus case: 1. Symptom: A 2014 Changan Ford New Focus (C346) sedan, equipped with a naturally aspirated 1.6L Duratec-16V-TI-VCT engine and a 6-speed DPS6/6DCT250 dry dual-clutch transmission, with a mileage of 12,870KM. The driver reported that the vehicle experienced high engine temperature and insufficient power while driving, accompanied by the engine fault warning light on the dashboard. 2. Diagnosis: After the vehicle was brought into the shop, the mechanic verified the symptoms described by the customer. Upon opening the engine hood, it was found that the engine was in a high-temperature state. After waiting for the engine to cool down, the engine was started, and the engine fault warning light on the dashboard illuminated. The Ford-specific diagnostic tool IDS was used to perform a self-check on the vehicle's systems. The self-check revealed a series of fault codes in the Powertrain Control Module (PCM).
6
1
Share

What are the differences between Q345 and Q235?

Here are the differences between Q235 and Q345: 1. Trace element content: Q235 material contains C0.14-0.22%, Mn0.30-0.65%, Si≤0.30%, S≤0.050, P≤0.045; Q345 material contains C≤0.20, Mn≤1.70, Si≤0.50, P≤0.035, S≤0.035. 2. Yield strength: The yield value of Q235 material is about 235MPa; the yield strength of Q345 material is 345MPa. 3. Applications: Q235 material is widely used in construction and engineering structures, for making steel bars or constructing factory building frames, high-voltage transmission towers, bridges, vehicles, boilers, containers, ships, etc., and is also widely used for mechanical parts with relatively low performance requirements; Q345 material has good plasticity and weldability, and is used for medium and low pressure containers, oil tanks, vehicles, cranes, mining machinery, and power stations.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.