Where is the tire pressure reset button for the Besturn X80?
2 Answers
The method to reset the tire pressure warning light for the Besturn X80 is as follows: 1. Press the MENU button on the turn signal lever, select [Tire Pressure Display] in the [Mileage & Fuel Information Menu], then press the SET button. 2. The Driver Information Center will display [Tire Pressure Relearn], select [Yes] and press the SET button, the horn will sound twice. 3. The Driver Information Center will display [Tire Pressure Learn Enabled]. 4. The left front turn signal will stay on, wait to increase or decrease the tire pressure by 8.3 KPA until the horn sounds. 5. Then proceed to the right front turn signal, the operation method is the same as the left front, followed by the right rear and left rear, each once. 6. After all four wheels are completed, all turn signals will stay on for 3 seconds, and the horn will sound twice, indicating the tire pressure reset is complete.
I've been driving the Besturn X80 for several years. When I first bought it, I really couldn't find the tire pressure reset button. Later, I figured out it's among the control buttons on the left side of the steering wheel—usually, you need to press and hold the button with the OK logo for a few seconds to enter the dashboard settings menu, then select the tire pressure monitoring system reset option. Remember to adjust the tire pressure to the standard value before resetting, otherwise, the system might misjudge. I've noticed many people overlook this: after resetting, you need to drive for a few minutes to let the sensors calibrate, so the warning light will turn off. Overall, the operation is simpler than imagined, but it was a bit nerve-wracking the first time. I recommend beginners follow the manual step by step. The key is safety first—unstable tire pressure increases the risk of a blowout, especially on highways. In short, practice a few times, and you'll get the hang of it. Don't be afraid of making mistakes.
