···
Log in / Register

Where is the tire pressure reset button for the 2017 VV7s?

4 Answers
VanIvan
07/29/25 9:06am
The tire pressure reset button for the 2017 VV7s is located on the dashboard and appears as a black pillar. The tire pressure reset function is used to reset the tire pressure monitoring system after addressing any tire pressure faults. Tire pressure reset method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "ding" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the dashboard warning light will turn off. Solutions for low tire pressure: If no visible damage is found, simply inflate the tire to the normal pressure and reset the tire pressure system; If a puncture is detected upon inspection, drive to a tire repair shop promptly to have the tire patched and then reinflate it; If the low tire pressure warning reappears some time after inflation but there is no puncture, it may be due to air leakage caused by a deformed wheel rim. It is recommended to inspect the wheel rim and replace it if necessary.
Was this review help?
17
0
Share
McNova
08/12/25 8:19am
As a long-distance driving enthusiast, I've researched the location of the 2017 WEY VV7S tire pressure reset button. It's typically integrated into the combination button area on the left side of the steering wheel. If you look closely, you'll find one of the icon buttons dedicated to vehicle settings. After starting the vehicle, first press the navigation button on the left, scroll through the menu to the vehicle settings option, where you should see the tire pressure monitoring system. Then hold the confirmation button for a few seconds to complete the reset. This is particularly important, especially after changing tires or adjusting pressure, to reset the system and avoid false low-pressure warnings, enhancing driving safety. If manual operation doesn't work, the vehicle settings menu on the central control screen might help, such as in the safety-related submenu. In short, regular tire pressure checks not only protect the tires but also optimize fuel consumption. If you encounter issues, it's best to consult the manual or visit a 4S store for a professional inspection.
Was this review help?
17
4
Share
Expand All
OCali
10/06/25 3:37am
After driving for so many years, I've noticed that for models like the VV7S, the tire pressure reset button is usually located on the steering wheel, among the row of buttons on the left side. Start the car, press and hold one of the buttons with a settings icon, navigate to the tire pressure option in the menu, and long-press to confirm the reset. The reset is mainly for dealing with false alarms, such as recalibrating the system after changing tires or inflating them. Before driving, I always make it a habit to glance at the tire pressure to ensure stability and prevent the risk of a blowout. If the button isn't working, it might be due to the system being locked—try turning the car off and on again, or check the manual for specific steps. Safety comes first; if you can't figure it out, just head to a service center without delay.
Was this review help?
19
2
Share
Expand All
NoraLynn
11/19/25 5:05am
The tire pressure reset button is located in the button area on the left side of the steering wheel. After starting the vehicle, press it a few times to find the settings menu, then select the tire pressure option to reset. Ensure the tire pressure is correct before operating to avoid false alarms. This is related to safe driving, consult a technician promptly if any issues arise.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

How to Deal with Glue Residue After Removing Window Tint Film?

Methods for handling residual adhesive from car window tint film are as follows: 1. The leftover adhesive from car window tint film can be wiped off using makeup remover oil or asphalt cleaner; 2. You can also use polyurethane thinner, commonly known as 811 cleaner, for wiping; 3. Lastly, another method is to use essential balm, which has fast volatile properties and low cost. Removing car window tint film requires certain steps and techniques, detailed as follows: 1. Peeling the film: First, lift a corner of the car window tint film, preferably using a fingernail or adhesive tape. If that doesn't work, consider using a blade to peel it. 2. Removing the film: With the help of hot air from a heat gun or hairdryer, use appropriate force and speed to slowly peel off the car window tint film. 3. Removing adhesive: If there is any residual adhesive from the glass film after peeling, clean it off with adhesive remover or cleaning agent.
1
2
Share

What are the causes of Camry idle vibration?

Camry idle vibration may be caused by the following reasons: 1. Severe engine carbon deposits - The most common cause of car vibration is dirty throttle valves or excessive carbon buildup in fuel injectors. When there's too much carbon deposit inside the engine, the gasoline sprayed by cold start injectors will be largely absorbed by these deposits; 2. Engine misfire - This mainly refers to one or more cylinders not working properly, manifested as: intermittent exhaust gas flow with noticeable exhaust pipe vibration, obvious engine vibration that can be felt, sometimes accompanied by "popping" sounds. This is mostly related to ignition coil failure; 3. Uneven air-fuel mixture in the engine can also cause idle vibration after cold start. The lower the temperature, the more fuel required for cold start, and the presence of carbon deposits will significantly affect whether cold start proceeds smoothly.
3
4
Share

Does idling the car with the heater on cause damage to the vehicle?

Idling the car with the heater on does not cause damage to the vehicle as long as the engine reaches its normal operating temperature. However, if the heater is turned on while the engine is still cold and has not reached its normal operating temperature, it can slow down the engine's warming process, leading to increased fuel consumption. Nevertheless, this does not harm the car. Below is some relevant information: 1. The fuel consumption when using the heater during idling depends on the car's displacement and engine tuning. For household cars, idling with the heater on for one hour consumes approximately 1 to 2 liters of fuel, though this may vary depending on the car model. 2. While idling with the heater on does not cause serious damage to the car, it can affect the passengers inside. Since the fuel does not burn completely during idling, carbon monoxide is produced. If the windows are not opened, the concentration of carbon monoxide inside the car can gradually increase, potentially leading to carbon monoxide poisoning for the passengers.
5
2
Share

Can I use my original license plate when changing to a new car?

When changing to a new car, you can retain your original license plate. For car owners who wish to keep their original plate, it is essential to ensure that the original plate has been used for more than one year. Only then will the plate be retained under the original owner's name during the transfer process. The retention period is one year. If the owner does not apply to reuse the plate within this period, it will automatically expire after one year, and the vehicle management office will reclaim the plate, making it unavailable for future use. The required documents for changing the car without changing the plate are as follows: 1. "Motor Vehicle Transfer or Registration Application Form"; 2. Original and copy of the owner's ID card; 3. Proof of vehicle purchase tax payment or tax exemption certificate, vehicle annual inspection certificate, and relevant documents submitted during vehicle registration; 4. Non-local residents also need to bring a residence permit and proof of the vehicle's origin; 5. For imported vehicles, additional documents include import certificates, vehicle whole-vehicle factory qualification certificate, and compulsory traffic insurance certificate.
7
5
Share

Should the tire pressure be the same for front and rear wheels of a sedan?

Front tire pressure and rear tire pressure can be different, but the difference should not be too large. Tire pressure is a range, not an exact value. In certain specific situations, it is more appropriate for the rear tire pressure to be higher than the front tire pressure. Below is relevant information: 1. For example, when the rear seats are fully occupied by three people and the trunk is also loaded with many items, the rear tire pressure should be higher than the front tire pressure. Higher rear tire pressure can make the car more fuel-efficient, resulting in lower fuel consumption. Additionally, the car can accelerate faster. The principle is: the higher the tire pressure, the smaller the contact area between the tire and the ground; the lower the tire pressure, the larger the contact area. 2. The front wheels are not only the driving wheels but also the steering wheels. If the front tire pressure is higher, the wear on the front tires will increase. Both the front and rear tire pressures must be within the standard range, and the difference should ideally not exceed 0.1bar.
18
5
Share

Is 0W40 Oil Suitable for All Seasons?

0W40 engine oil is considered all-season oil, but its suitability still depends on the temperature of the location where the vehicle is used. The 0W designation indicates the oil's cold-start performance—the smaller the number, the better the oil's cold resistance. Therefore, using 0W40 oil allows for easy engine starts even in cold weather. The number 40 represents the kinematic viscosity standard at 100°C (between 12.5mm²/s and 16.3mm²/s). Additional information: 1. In fact, many modern engine oils are designed for both winter and summer use, primarily depending on the oil's quality grade and performance. If the engine frequently operates under high-load conditions (accelerating oil consumption), it is advisable to use full synthetic or semi-synthetic oil. 2. As for quality grades, following the level specified in the vehicle's manual is generally sufficient for daily use. However, if the vehicle is often driven in congested urban environments, upgrading to a higher-grade oil (more environmentally friendly and economical) may be considered.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.