Where is the tire pressure reset button for BAIC X3?

What is the tutorial for wheel hub plating?

The tutorial for wheel hub plating is as follows: 1. Use aluminum alloy welding technology to repair surface gaps on the wheel hub, ensuring its integrity; 2. Remove corroded and aged paint; 3. Polish and grind; 4. Spray color paint according to the owner's customized color, ensuring even application inside and out; 5. Apply protective clear coat; 6. Conduct a salt spray test. The wheel hub is the rotating part of the wheel steel inside the tire connected by columns, i.e., the metal component at the center that supports the tire mounted on the axle. Depending on the characteristics and requirements of different vehicle models, the surface treatment process for wheel hubs may vary, generally categorized into painting and plating.

18

0

Share

What car has a snake on its license plate?

The car with a snake on its license plate is the Ford Mustang Cobra produced by Ford Motor Company in the United States. Taking the 2020 Ecoboost Mustang as an example, its body dimensions are: length 4794mm, width 1916mm, height 1391mm, wheelbase 2720mm, and fuel tank capacity 58.9L. The 2020 Ecoboost Mustang is equipped with a 2.3L turbocharged engine, with a maximum horsepower of 299PS, maximum power of 220kW, maximum torque of 434Nm, and is paired with a 10-speed automatic transmission.

13

1

Share

Should You Shift to P Gear Before or After Turning Off the Engine in an Automatic Transmission?

In an automatic transmission, you should shift to P gear before turning off the engine. Failing to shift to P gear before turning off the engine can damage the vehicle. The consequences of turning off the engine without shifting to P gear include potential damage to the engine, and the key cannot be removed. You must shift back to P gear to remove the key and turn off the engine. The P gear in an automatic transmission is also known as the parking gear or start gear. When you shift to P gear while parking, the wheels are mechanically locked, preventing the vehicle from rolling. Both P gear and N gear are neutral gears, but the difference is: P gear has a mechanical braking device, so once the gear grooves in the transmission are locked by the pawl, the vehicle will no longer move; N gear itself does not have any wheel-locking mechanism, requiring the use of the handbrake or brake pedal to secure the wheels.

11

4

Share

What Causes the Reversing Camera Image to Be Laterally Inverted?

The reasons for the reversing camera image being laterally inverted are: 1. The system's mirror function is enabled; 2. The front and rear cameras are installed in reverse. The installation method for the reversing camera is: 1. Remove the rear license plate light and install the probe; 2. Connect the reversing camera's wiring harness to the positive and negative terminals, and link it to the navigation system's signal line; 3. Connect the signal transmission connector and secure it with tape. The reversing camera system consists of a wide-angle camera, a control unit responsible for signal processing and transmission, a multimedia display, front information display, operation control unit, TV tuner, and CAN data bus. The purpose of the reversing camera is to allow the driver to view the rear situation on the display while reversing, thereby avoiding accidents and improving reversing safety.

18

1

Share

What are the length, width, and height of the Geely Vision sedan?

The length, width, and height of the Geely Vision sedan are: 4599mm, 1747mm, and 1482mm respectively. It is a compact sedan with a National VI emission standard. Taking the 2020 manual super-value edition Geely Vision as an example, its wheelbase is 2615mm, fuel tank capacity is 41 liters, and trunk capacity is 477 liters. The 2020 manual super-value edition Geely Vision features a MacPherson independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 109PS, maximum power of 80kW, and maximum torque of 142Nm.

3

1

Share

Must Brake Discs with Grooves Be Replaced?

Brake discs with grooves must be replaced. Causes of brake disc wear: 1. Inferior quality brake discs or drums can lead to premature wear of brake pads; 2. Damage to the brake calipers in the braking system over long-term use can cause the brakes to not release properly; 3. The materials used for the brake discs do not meet requirements, or the friction layer design density of the brake discs is unreasonable; 4. The original brake pads have a small design area, and are used under conditions of long-term overspeeding, frequent braking, overloading, and prolonged high temperatures. When the driver presses the brake pedal, the brake calipers clamp the brake discs to generate braking force, slowing down or stopping the vehicle. The braking system mainly consists of a vacuum booster pump, master brake cylinder, wheel brake cylinders, brake pads, and brake discs.

11

2

Share

Where is the tire pressure reset button for BAIC X3?

What is the tutorial for wheel hub plating?

What car has a snake on its license plate?

Should You Shift to P Gear Before or After Turning Off the Engine in an Automatic Transmission?

What Causes the Reversing Camera Image to Be Laterally Inverted?

What are the length, width, and height of the Geely Vision sedan?

Must Brake Discs with Grooves Be Replaced?

Why Do Motorcycles Need to Warm Up in Summer?

Where is the fuel pump located in a car?

What Are the Solutions for Tire Leakage During the Rainy Season?

What are the detailed steps for parking an automatic transmission car?