Where is the tire pressure monitoring system located on the Range Rover Evoque?

3 Answers
DeLorenzo
07/29/25 6:57pm
The tire pressure monitoring system on the Range Rover Evoque is located on the center console. Here is some relevant information about the tire pressure monitoring system: 1. Introduction: The tire pressure monitoring system is a simple system that utilizes the existing ABS sensor functionality to compare the rotation counts of the tires. A tire with insufficient pressure will have a shorter circumference, so when driving, its rotation count will differ from the other tires. 2. Function: The main purpose is to automatically monitor the tire pressure in real-time while driving, alerting the driver to leaks or low pressure to ensure driving safety. It serves as an early warning system to protect the lives of drivers and passengers.
Was this review help?
14
3
Share
ElleDella
08/14/25 12:48pm
I have always been a Land Rover Evoque owner, and I remember the first time I discovered the tire pressure monitoring system was on the dashboard—it was quite easy to find. While driving, you can operate it using the buttons on the right side of the steering wheel. Press the buttons to select the vehicle information menu, and you’ll see the specific pressure values for each tire, as well as the option to reset the system. This feature is highly practical because it provides real-time alerts about tire pressure changes, helping you avoid the risk of a blowout. I once experienced the tire pressure warning light turning on, checked the menu, and found that the left front tire pressure was too low. After promptly inflating it, I safely made it home. I recommend familiarizing yourself with this system—it monitors air pressure via sensors and integrates the data into the vehicle display. Regularly checking tire pressure, such as before inflating or long trips, can extend tire lifespan and enhance driving safety. Remember, if the display is unclear, refer to the manual—it can save you repair costs. In short, on the Land Rover Evoque, the tire pressure monitoring location is primarily centered in the dashboard area controlled by the steering wheel.
Was this review help?
9
2
Share
Expand All
Tyler
10/15/25 2:21am
As someone who often helps friends with car repairs, I can tell you that the Land Rover Evoque's tire pressure monitoring system is typically integrated into the vehicle information center. The specific location is on the dashboard display, accessed by using the steering wheel buttons to bring up the menu. There, you'll find real-time tire pressure data and warning indicators. The system is based on sensor technology that automatically detects low pressure and issues alerts. I once helped a neighbor reset this system—he found the reset option in the dashboard menu, and the process was straightforward. This feature isn't just about convenience; it's a safety issue, as abnormal tire pressure can easily lead to accidents. I recommend that owners make it a habit to check tire pressure data monthly and top up the air if any deviations are found. Additionally, some Evoque models may allow access to more detailed settings via the central control screen, but the steering wheel controls are the primary method. In short, locating the dashboard interface makes tire pressure management easy. Maintaining the system well ensures a smoother drive.
Was this review help?
3
3
Share
Expand All
More Forum Discussions

Does Audi have pure electric vehicles?

Audi currently offers two pure electric vehicle models: the Audi e-tron and the Audi Q2L e-tron. The e-tron designation serves as Audi's identifier for its pure electric lineup. The primary distinction between the Audi Q2L e-tron and its gasoline-powered counterpart lies in its pure electric powertrain system, which has prompted a series of modifications including exterior design, interior features, and overall vehicle architecture. Additional details: 1. As Audi's inaugural luxury C-segment pure electric SUV, the Audi e-tron is equipped with a dual asynchronous motor system (front and rear). In boost mode, it delivers a maximum power output of 300kW, achieves 0-100km/h acceleration in just 5.7 seconds, and offers an NEDC-rated range of 470 kilometers. 2. The Audi Q2L is developed on Volkswagen's MQB platform, consequently the Q2L e-tron variant also utilizes this architecture. This indicates that the Q2L e-tron isn't manufactured on Audi's dedicated e-tron electric platform, and its electric system likely shares specifications with Volkswagen's e-Golf pure electric version.
19
4
Share

Vehicle Pickup Process After Accident Repair?

Retrieve the vehicle with the auto repair settlement invoice. Before pickup, primarily verify whether the previously reported faults have been resolved. Inspect the vehicle's exterior, check the sheet metal seams and tires, ensure all interior equipment is functioning properly, and confirm all repairs are completed before taking possession. Key considerations when picking up a repaired accident vehicle: 1. Exterior inspection: This includes examining the paintwork and sheet metal for any scratches incurred during repairs. Ensure the sheet metal repairs are smooth and even, without any uneven areas. 2. Tire and sheet metal seam inspection: If the accident resulted in tire replacement, check the new tires for wear by observing the integrity of the tread burrs—intact burrs indicate new tires. Post-repair, verify that seams are uniform, especially around windows and headlights, as poor sealing can lead to water leakage during rain, potentially affecting the vehicle. 3. Interior equipment functionality check: Familiarize yourself with and test all interior buttons, dashboard functions, and ensure the interior details like upholstery are clean and new. Finally, take a test drive to confirm all features are operational and the vehicle runs smoothly.
19
0
Share

Are 6-seater vehicles exempt from inspection for 6 years?

6-seater vehicles are exempt from inspection for the first 6 years. For vehicles under the 6-year exemption policy, physical inspection is not required for annual review. Applying for the annual inspection sticker is free of charge. The application steps are as follows: 1. Bring all required documents to the post office for processing. 2. Take the vehicle license, owner's ID card, vehicle qualification certificate, and purchased vehicle insurance policy to the local government service center. 3. Obtain the annual inspection sticker at the traffic police station, the environmental protection sticker at the environmental testing center, and the compulsory traffic insurance sticker at the insurance company. 4. First, go to the exhaust emission testing station for testing (bring the vehicle license), then obtain the green label (bring the vehicle registration certificate), and finally get the inspection sticker at the traffic police station (if you are the owner, bring your ID card and copy, duplicate of compulsory traffic insurance, vehicle license, copy of environmental protection certificate; if you are not the owner, bring the owner's ID card and copy, your ID card and copy, and if not a local resident, also bring the residence permit and copy).
14
4
Share

How to Turn Off the LIM in Mercedes-Benz Vehicles?

lim refers to the cruise control system. The steps to turn off the LIM in Mercedes-Benz vehicles are: 1. Open the driver's door of the Mercedes-Benz and press the brake pedal. 2. Press the one-touch start button of the Mercedes-Benz, the dashboard lights up, and the vehicle starts. 3. Press the CNCL button on the left keyboard area of the multifunction steering wheel to turn off the cruise control system. More details about the LIM are as follows: 1. The Mercedes-Benz LIM is the cruise control system of Mercedes-Benz vehicles. Once activated, the driver does not need to press the accelerator pedal, and the vehicle will automatically drive at the speed set by the driver. With this system, drivers no longer need to control the accelerator pedal during long highway drives, reducing fatigue and unnecessary speed changes, which saves fuel. Therefore, it has broad market prospects. 2. The working principle of the cruise control system is that the cruise control component reads the pulse signal from the speed sensor and compares it with the set speed, then issues commands to the servo mechanism to adjust the throttle opening, increasing or decreasing it to maintain the set speed. 3. The electronic multifunction cruise control system eliminates the mechanical control part of the cable-type cruise control, adopting precise electronic control for more accurate operation and avoiding the risk of mechanical failure.
12
0
Share

How to Make a Good Turn While Driving?

How to make a good turn while driving is as follows: 1. Always turn slowly: Especially when making a turn, you must slow down in advance. Only by going slowly can you pass safely or correct your mistake in time if you turn incorrectly. On the contrary, turning too fast can easily lead to danger. 2. When turning, always check the rearview mirror: Make sure there is no one behind or to the side of the car before turning. 3. Steering wheel control is crucial when turning: If you want to make a sharp turn, turn the steering wheel as much as possible, and then slowly straighten it out after completing the turn. For a wide turn, just turn the steering wheel slowly. 4. Watch out for blind spots when turning: Often, people look up but not down, or left but not right when turning, leading to overlooking blind spots, which can result in hitting the curb or causing a scrape. Always check for obstacles below the rearview mirror, and if necessary, open the car door to take a look before turning.
15
0
Share

What Causes the Clicking Sensation When Pressing the Brake in a Mercedes-Benz?

Mercedes-Benz brakes producing a clicking sensation when pressed may be due to normal ABS operation, safety reminders, loose chassis components, unstable brake discs, and other reasons. Below is relevant information about Mercedes-Benz: 1. Recall Incident: On December 19, 2014, Daimler AG's Mercedes-Benz submitted a filing to the U.S. National Highway Traffic Safety Administration (NHTSA), announcing a recall of 8,279 Sprinter vans in the U.S. due to potential oil leakage hazards. 2. Logo: The original Mercedes-Benz logo featured the letters "Benz" surrounded by laurel branches. In 1926, after the merger of Daimler and Benz, the star-shaped emblem and the Benz laurel branches were combined into one, with the words "Mercedes-Benz" below. Later, the laurel branches were replaced with a circle, and the "Mercedes-Benz" wording was removed. Following the merger of these two historic automobile manufacturers, the company reapplied for a patent on the trademark. The star within this circle evolved into today's design, which has been used ever since and has become one of the most famous trademarks in the world.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.