Where is the tire pressure monitoring reset button on the Geely Vision X6?

3 Answers
DelAna
07/29/25 9:26pm
The tire pressure monitoring reset button on the Geely Vision X6 is located on the right side of the vehicle's steering wheel. The status of the tire pressure can be viewed through the tire pressure monitoring item on the instrument panel. Generally, the normal tire pressure for the vehicle ranges from 2.3 bar to 2.5 bar. Taking the Vision X6 2020 1.4T Manual Comfort model as an example, its dimensions are 4546 mm in length, 1834 mm in width, and 1715 mm in height, with a wheelbase of 2661 mm. The body structure is a 5-door, 5-seat SUV. In terms of power, it is equipped with a 1.4-liter turbocharged engine, delivering a maximum power of 104 kW and a maximum torque of 235 Nm.
Was this review help?
10
3
Share
LaStephen
08/15/25 8:14pm
I remember that when driving the Geely Vision X6, the tire pressure monitoring reset is electronic without a dedicated physical button. Once in the car, after turning the key to ACC or starting the engine, press the menu button on the left side of the dashboard to enter the settings interface. Find the 'Vehicle Information' or 'Tire Pressure' option, scroll to the bottom, and click 'Reset' to confirm. After resetting, it's best to drive about five kilometers to let the system relearn the tire pressure data. This operation is very simple, but before resetting, I always recommend using a tire pressure gauge to check if each tire's pressure is within the standard range of 2.3-2.5 bar; otherwise, the warning light will come on again soon. Regular maintenance can avoid the trouble of breaking down on the road—safety first.
Was this review help?
12
3
Share
Expand All
MacDaisy
10/17/25 3:45am
When dealing with car issues, I found that the tire pressure reset for the Geely Vision X6 is all done in the dashboard menu. After starting the vehicle, use the up and down buttons on the steering wheel to switch to the settings menu, select the tire pressure monitoring section, and there's a reset function inside. It's not a physical button, so don't waste time searching around the car—the reset process only takes a few seconds. After the operation, the system will briefly flash the indicator light to confirm. Remember, resetting only clears the warning; if there's an actual tire leak or unresolved pressure abnormality, the issue will recur. I make it a habit to check the tire pressure every month, ensuring a smoother ride and greater peace of mind for my family.
Was this review help?
7
5
Share
Expand All
More Forum Discussions

Why is the car air conditioner not blowing strong air?

Here are the reasons why the car air conditioner is not blowing strong air: 1. Adjustment issue: When the air volume is small, the first thing to check is the current mode of the air conditioner and the fan speed setting. If it's set to medium or low speed, it might simply be a case of incorrect adjustment. 2. Temperature reason: Check the current temperature, as most air conditioners are designed to automatically switch to a lower fan speed when the temperature is too low. Therefore, if the temperature is too low, it won't be possible to increase the fan speed. 3. Air conditioner blockage: Check if the air filter is severely clogged with dirt and dust, which can obstruct the airflow. A dirty air filter not only affects the air volume but also the cooling efficiency.
3
0
Share

Can a car engine withstand running continuously for 12 hours?

It is normal for a car to sustain some damage when running continuously for 12 hours. Here are the potential damages caused by prolonged continuous driving: 1. Engine oil leakage: If a car runs continuously for over 1000 kilometers, the engine will be in a high-temperature state. If there's any oil leakage at this time, it can easily lead to spontaneous combustion. 2. Affects engine output: Long-term high-speed driving can cause an issue where the exhaust temperature rises. If the car's exhaust temperature increases, it may affect the ECU, potentially triggering the system's over-temperature protection, which would reduce engine output.
9
5
Share

Do You Need to Release the Throttle When Shifting Gears in a Manual Transmission?

When shifting gears in a manual transmission, you need to release the throttle. Only CVT transmissions can truly achieve shifting without releasing the throttle. Shift gears according to the car's speed: Generally, start in first gear, then shift to second gear after driving a few meters; shift to third gear when the speed reaches above 20 mph but below 35 mph; shift to fourth gear when the speed reaches above 35 mph but below 45 mph; shift to fifth gear when the speed exceeds 45 mph. Coordination between clutch and throttle during shifting: When shifting gears, the clutch and throttle must be well-coordinated. Press the clutch pedal all the way down while simultaneously releasing the throttle pedal, then quickly shift to the corresponding gear.
3
1
Share

Under what circumstances can you make a U-turn at a red light?

Here are the situations where you can make a U-turn at a red light: 1. Places with an early U-turn opening: If there is a special left turn or U-turn indication when approaching the intersection, the driver can turn on the left turn signal. This will not affect other vehicles or result in a violation. 2. Intersections with a U-turn sign: Generally, the presence of a U-turn sign means that you can make a U-turn. Therefore, when driving, it is best to make a U-turn based on your own situation without disturbing other vehicles and ensuring the safety of pedestrians. 3. Intersections without explicit prohibitions on U-turns and left turns: Generally, if there is no sign prohibiting a U-turn at the intersection, you can make a normal U-turn without affecting other vehicles. If there is a central divider in the middle of the road, it may change from a solid line to a dashed line when approaching the intersection.
13
0
Share

What is the valve clearance for Komatsu engines?

Komatsu engine valve clearance is measured with the engine at operating temperature, with the intake valve at 0.4 mm and the exhaust valve at 0.6 mm. Below is an introduction to valve clearance: Hazards of insufficient valve clearance: When the engine is running, the valves will expand due to rising temperatures. If there is no gap or insufficient clearance between the valve and its transmission components when cold, thermal expansion during operation will inevitably cause the valve to fail to close tightly. This results in gas leakage during the compression and power strokes, reducing engine power and potentially making the engine difficult to start in severe cases. Introduction to valve clearance: To eliminate this phenomenon, a certain gap is typically maintained in the valve and its transmission mechanism during cold assembly of the engine, compensating for thermal expansion of the valve. This gap is called valve clearance.
6
5
Share

The Differences Between Geely Emgrand GS and Emgrand S

Geely Emgrand GS and Emgrand S differ in the following aspects: Price: The top variant of Emgrand S is officially priced lower than that of Emgrand GS. Overall Body: The top variant of Emgrand S has a shorter body length compared to Emgrand GS, but both share the same wheelbase. Power Output: The top variant of Emgrand GS delivers stronger performance than Emgrand S. Product Positioning: Although Emgrand S shares many similarities with Emgrand GS in terms of vehicle type, Emgrand S focuses more on brand upgrades in youthful sportiness, fashion sense, and technological appeal.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.