Where is the tire pressure monitoring on Toyota C-HR?

1 Answers
MacKing
07/29/25 1:01pm
Toyota C-HR comes standard with a tire pressure monitoring system across all trims. The tire pressure monitoring display can be found on the instrument panel of the Toyota C-HR. Common tire pressure monitoring methods: Direct tire pressure monitoring uses wireless transmitters to send pressure data from inside the tires to a central receiver module, which then displays the pressure readings for each tire. Indirect tire pressure monitoring works by comparing rotational speed differences between tires to detect pressure abnormalities. The Tire Pressure Monitoring System (TPMS) combines both methods by equipping two diagonally opposite tires with direct sensors while using a 4-wheel indirect monitoring approach. Daily tire pressure precautions: Most vehicles are equipped with tire pressure monitoring systems that alert drivers about tire leaks or abnormal pressure to ensure driving safety. Drivers should regularly check the tire pressure warning light on the instrument panel, as both underinflation and overinflation can negatively affect vehicle handling and accelerate tire wear.
Was this review help?
11
4
Share
More Forum Discussions

What are the causes of a rich air-fuel mixture?

The causes of a rich air-fuel mixture are: 1. Damage to the carburetor throttle shaft or gasket; 2. Wet gasoline and excessive carbon deposits on the spark plug electrodes; 3. The choke valve being closed; 4. A dirty or clogged air filter element; 5. Improper adjustment of the float chamber fuel level or a faulty needle valve seal; 6. A clogged air jet or a malfunctioning economizer; 7. Excessive adjustment of the carburetor main jet or significant wear of the main jet. The solutions for a rich air-fuel mixture are: 1. Clean or replace carbon deposits on the ignition coil and spark plugs; 2. Replace the carburetor throttle shaft or gasket; 3. Open the choke valve switch; 4. Clean the air filter element.
2
0
Share

Can a passenger car tow a flatbed trailer?

Passenger cars can tow flatbed trailers. Additional information: Article 56 of the "Regulations for the Implementation of the Road Traffic Safety Law" stipulates the following requirements for motor vehicles towing trailers: Trucks, semi-trailer tractors, and tractors are only allowed to tow one trailer. The lighting signals, braking systems, connections, and safety protection devices of the trailer must comply with national standards. Small passenger cars are only permitted to tow recreational trailers or trailers with a total mass of less than 700 kilograms. Trailers must not carry passengers; the load capacity of the trailer towed by a truck must not exceed the truck's own load capacity. Large and medium-sized passenger vehicles, low-speed trucks, three-wheeled vehicles, and other motor vehicles are not allowed to tow trailers.
20
0
Share

Is It Worth It to Repaint a New Car's Bumper?

If the damage can be repaired, it's best to avoid repainting. You can use stickers to cover the damaged area, which effectively reduces the appearance of color differences and provides some psychological comfort to the vehicle owner. Regardless of the repair method chosen, it won't have much impact on the vehicle. Here is some additional information on how to protect your vehicle's paint: Applying a paint protection film (PPF) is recommended. PPF can effectively protect the vehicle's paint. In cases of minor scratches that don't damage the paint, the film may get damaged, but the original paint remains unharmed, making it a safe option. Additionally, it helps maintain the gloss of the vehicle's paint, making it a very good method currently available.
1
5
Share

What is Diagonal Parking Space Line Analysis?

Diagonal Parking Space Line Analysis: Drive towards the diagonal line direction: Align the left rearview mirror with the right line of the parking space: Step 1: First, park the car on the right side of the parking space, then adjust the vehicle. When the left rearview mirror aligns with the left boundary line of the parking space, turn the steering wheel fully to the right and continue moving forward; Turn fully left and move forward: Step 2: When the body of the car forms an appropriate angle with the parking space (the left rearview mirror can see the left front of the car), stop the car, straighten the wheels, and slowly reverse. The reversing method can refer to the previous non-aligned parking space method. Reverse into the space: Step 3, reverse slowly, observe the left and right rearview mirrors to ensure the car is in a straight line with the parking space.
15
0
Share

What are the causes of unstable idle speed and shaking in a car?

The causes of unstable idle speed and shaking in a car are: 1. Severe engine carbon deposits; 2. Dirty throttle body or carbon deposits in the fuel injectors; 3. Faulty spark plugs, high-voltage wires, or ignition coils leading to poor ignition system performance; 4. Unstable oil pressure, insufficient fuel supply pressure from the fuel pump, or incorrect readings from the intake pressure sensor; 5. Clogged fuel lines causing insufficient fuel supply; 6. Aging engine components. Solutions for unstable idle speed and shaking: 1. Clean engine and idle motor carbon deposits; 2. Clean the fuel system; 3. Replace spark plugs, high-voltage wires, and ignition coils; 4. Clean the air filter and throttle body; 5. Replace aging engine components.
1
2
Share

Is the steering wheel of a new car slightly biased to the right when it leaves the factory?

No. Reasons for the steering wheel being biased to the right: If the vehicle only slightly drifts to the right: Considering road design factors, it is actually difficult to notice with the naked eye. In fact, on flat ordinary roads, the center is higher than the sides to reduce water accumulation during rain. However, if the car's direction drifts severely: Then the owner needs to be alert. First, check the tire pressure. If the tire pressure on both sides is unbalanced, the car will naturally drift to the side with lower pressure when driving on flat roads. Additionally, the vehicle should have its tire positions rotated regularly: Because the wear on the drive wheels will be greater than on the other wheels, and neglecting this can also cause the car to drift. Furthermore, inconsistent tread wear on both sides of the tires can also lead to the car drifting.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.