Where is the Tire Pressure Monitoring in the Tayron?

What Causes Car Jerking?

The reasons for car jerking are: 1. Excessive carbon buildup in the throttle body, fuel injectors, and intake manifold; 2. Poor fuel quality leading to incomplete combustion; 3. Faulty spark plugs or ignition coils causing cylinder misfire; 4. Mismatch between engine torque and transmission oil pressure. The steps to clean the throttle body are: 1. Open the hood and locate the engine's throttle body; 2. Use a flathead screwdriver to remove the air filter and intake pipe, then unplug the electrical connector on the throttle body; 3. After removing the screws, take off the throttle body and use a dry cloth to plug the engine intake to prevent dirt from entering; 4. Spray cleaner on the throttle body and clean it thoroughly.

14

3

Share

How to Adjust the Headlight Height?

The method for adjusting the headlight height involves a manual adjustment knob inside the car, which allows you to freely adjust the illumination height of the headlights. Below is some information about car lights: 1. Introduction: Car lights refer to the lamps on a vehicle. 2. Function: They serve as tools for road illumination during nighttime driving and also as signaling devices for various driving indications. Generally, they are categorized into headlights, taillights, turn signals, etc. 3. Brake Lights: High-mounted brake lights are usually installed on the upper part of the rear of the car, making it easier for vehicles behind to notice when the front vehicle brakes, thereby helping to prevent rear-end collisions. The purpose of high-mounted brake lights is to alert vehicles behind, thus avoiding rear-end accidents.

19

1

Share

What's the Difference Between 1.5T and 1.5L Engines in Compact Cars?

The difference between 1.5T and 1.5L engines in compact cars lies in their engine types: the 1.5T uses a 1.5-liter turbocharged engine, while the 1.5L employs a 1.5-liter naturally aspirated engine. Naturally aspirated engines operate on a simpler principle, resulting in lower failure rates and greater reliability during use. Turbocharging is a technology that utilizes exhaust gases generated by internal combustion engines to drive air compressors. The primary function of turbocharging is to increase the engine's air intake, thereby enhancing its power and torque output, making the vehicle more powerful. Natural aspiration is a method of engine air intake where air is drawn into the combustion chamber solely by atmospheric pressure, without the use of any supercharger.

6

3

Share

How Long Does It Take to Change Transmission Fluid?

Transmission fluid replacement takes about an hour. The methods for changing transmission fluid are: 1. Gravity drain: After loosening the tightening nut at the bottom of the oil pan, the transmission fluid will automatically flow out from the drain hole. 2. Machine flush: Connect the transmission and the flushing machine through pipeline interfaces, using new fluid to push out the old fluid. 3. Oil pan removal method. The functions of transmission fluid are: 1. Keeping the gear system clean; 2. Lubricating the transmission components. Signs that indicate the need for transmission fluid replacement include: 1. Vehicle shaking and gear shifting hesitation; 2. Transmission overheating warning on the dashboard; 3. Engine stalling; 4. Unusual noises.

13

1

Share

How to Clean Knitted Car Seats?

Knitted car seat cleaning methods: For seats that are not very dirty, you can choose a long-haired brush and a powerful vacuum cleaner for cleaning, which is just simple dust removal, so a brush sweep will suffice. For surfaces that are dirtier, soapy water can be used. This method is for cases where the surface is quite dirty. It is recommended to first remove surface debris, then wipe the fiber surface with a soft dry cloth. Currently, there are specialized cleaners for knitted seats. These cleaners are particularly effective against colored stains such as tea or beverages. You can spray more on the stained area, wait for thirty seconds, and then wipe it clean. If it doesn't work the first time, try repeating the process several times.

14

5

Share

How to Remove Cement from Car Surface?

Methods to remove cement from the car surface are: 1. Rinse off with clean water before the cement stains harden; 2. Spray white vinegar or a specialized cement cleaner onto the cement stains, wait for them to soften, then rinse off with clean water; 3. Pour gasoline onto the stains, wait for the car paint to soften, and then rinse off the cement stains with water. Methods to maintain car paint include: 1. Wash the car after the engine has cooled down; 2. Minimize exposure to direct sunlight; 3. Clean stains on the car body promptly; 4. Rinse with clean water after rain to prevent acid rain corrosion; 5. Apply wax or glaze coating.

2

5

Share

Where is the Tire Pressure Monitoring in the Tayron?

What Causes Car Jerking?

How to Adjust the Headlight Height?

What's the Difference Between 1.5T and 1.5L Engines in Compact Cars?

How Long Does It Take to Change Transmission Fluid?

How to Clean Knitted Car Seats?

How to Remove Cement from Car Surface?

Can lane changes be made to either side?

How to Open a Locked Car Door from the Outside?

How to Check a Vehicle's Emission Standard?

How to Affix the Compulsory Insurance Label?