Where is the Tire Pressure Monitoring in the Sylphy?

1 Answers
MargaretLynn
07/30/25 6:50am
The tire pressure indicator of the Sylphy can be viewed on the instrument display screen, which directly shows the specific values of all four tires. According to the requirements and regulations of the international GBT2978-2008 standard, the recommended tire pressures for different types of tires are as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: should not exceed 3.5bar. Tire pressure reset method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the completion of the tire pressure reset.
Was this review help?
9
5
Share
More Forum Discussions

What are the dimensions of the BMW Mini?

The dimensions of the BMW Mini are a length of 3832mm, width of 1727mm, height of 1451mm, and a wheelbase of 2829mm. The BMW MINI series models include: MINI COOPER, MINI Clubman, MINI Convertible, MINI JCW Convertible, MINI COOPER COUPE, etc. Introduction to BMW MINI powertrain: The MINI lineup offers two displacement engines with three different calibrations. The 1.5T inline three-cylinder engine comes in high and low power versions, with the low power version at 75kW and the high power version at 100kW. The 2.0T inline four-cylinder engine has a maximum power of 141kW and a peak torque of 280N.m. Additionally, all models are equipped with a 7-speed dual-clutch transmission. Features such as HUD head-up display, Harman Kardon audio system, wireless charger, and active braking are also available.
6
1
Share

What type of fuel should the Baojun RS3 use?

Baojun RS3 uses 92-octane gasoline. How to choose gasoline: The Jetta VS7 can use 92-octane gasoline, but using 95-octane gasoline provides better engine protection. Even high-compression engines can use lower-octane gasoline. Do not blindly choose gasoline based on compression ratio; simply follow the manufacturer's recommendations. Choosing between 95-octane and 92-octane gasoline: 95-octane gasoline consists of 95% isooctane and 3% n-heptane. High-compression engines should use high-octane gasoline. Using low-octane gasoline in a high-compression engine can cause abnormal combustion, leading to knocking, increased fuel consumption, and reduced performance. This type of fuel is suitable for high-end vehicles. 92-octane gasoline has an octane rating of 92 and contains 8% n-heptane, making it suitable for mid-range vehicles.
1
5
Share

What is the drivetrain type of the Volkswagen Lavida?

The drivetrain type of the Volkswagen Lavida is front-engine, front-wheel drive (FF). Front-engine, front-wheel drive refers to the configuration where the engine is positioned at the front of the vehicle and the front wheels are responsible for driving the entire car. The Volkswagen Lavida is a sedan produced by SAIC Volkswagen. In terms of body dimensions, it measures 4670mm in length, 1806mm in width, and 1474mm in height. Regarding powertrain options, the Lavida offers a 1.5L naturally aspirated engine, a 1.2L turbocharged engine, and a 1.4L turbocharged engine. The 1.5L naturally aspirated version delivers a maximum horsepower of 112 HP, the 1.2L turbocharged version produces 116 HP, and the 1.4L turbocharged version generates 150 HP. For transmissions, the Lavida provides choices between a 5-speed manual, 6-speed automatic manual, and 7-speed dual-clutch transmission.
19
1
Share

Which gear should be used for Haval H2 when going uphill?

Haval H2 should use 2nd gear when going uphill. Parking on an uphill slope: In most cases, being able to park on an uphill slope indicates severe traffic congestion. During this period, whether the car rolls back or stalls, it will cause serious impacts on the vehicles behind. Many manual transmission drivers may not pay much attention to hill start assist, but in fact, hill start assist is extremely important. At the very least, it prevents the car from rolling back or stalling when starting on a slope, which is the primary function of hill start assist. Releasing the brake: On roads equipped with hill start assist, you can easily take your foot off the brake while maintaining a safe distance. During startup, many procedures will naturally disappear. It won't cause the car to brake, and the car will move forward normally. At this time, the indicator light on the dashboard will also illuminate. Especially at high speeds, this hill start assist is officially activated. If the normal indicator light doesn't come on, you should get out and check whether there was a failure during installation.
20
1
Share

What are the differences between the Toyota 4Runner and Land Cruiser Prado?

The differences between the Toyota 4Runner and Land Cruiser Prado: 1. Different engine displacements: The 4Runner comes standard with a 4.0L engine across all models; the Prado offers both 4.0L and 3.5L engines. 2. Different transmissions: The 4Runner uses a 5-speed automatic transmission; the Prado comes standard with a 6-speed automatic transmission across all models. 3. Different update cycles: The 4Runner has remained unchanged since its first minor update in the 2014 model year; the Prado undergoes updates every four years. 4. Different body dimensions: The 4Runner measures 4860mm in length, 1930mm in width, and 1820mm in height, with a wheelbase of 2790mm; the Prado measures 4840mm in length, 1885mm in width, and 1890mm in height, with a wheelbase of 2790mm, while some Prado models have a length of 5010mm.
19
1
Share

Can Bugatti be registered in China?

Yes, as long as it is legally imported and registered at the vehicle management office, it can be licensed. Number of engine cylinders: Bugatti has a 16-cylinder engine. Common cylinder numbers for car engines include 3, 4, 5, 6, 8, 10, 12, and 16 cylinders. With the same cylinder diameter, more cylinders mean larger displacement and higher power; with the same displacement, more cylinders allow for smaller cylinder diameters, enabling higher RPMs and thus greater power output. Correspondence between displacement and cylinder count: Engines with 1-liter to 1.5-liter displacement commonly use 3 cylinders, 2.0-liter engines are typically 4-cylinder, 2.5-liter engines are 5-cylinder, around 3-liter engines are usually 6-cylinder, around 4-liter engines are 8-cylinder, 5.2-liter engines are 10-cylinder, and engines above 5.5 liters use 12 cylinders.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.