Where is the tire pressure marking on the Buick Excelle XT?

2 Answers
BarrettDella
07/24/25 9:52pm
The tire pressure marking on the Buick Excelle XT can be found on the side of the tire. Taking the 2010 Excelle XT as an example, it is a compact car with the following dimensions: length 4419mm, width 1814mm, height 1487mm, wheelbase 2685mm, minimum ground clearance 101mm, and a hatchback body structure. It has a fuel tank capacity of 60L and a trunk capacity of 375L. The 2010 Excelle XT features a MacPherson strut front suspension and a compound torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine producing a maximum horsepower of 121PS, maximum power of 89kW, and maximum torque of 150Nm, paired with a 6-speed automatic transmission.
Was this review help?
19
0
Share
CadenDella
08/10/25 2:49pm
As a veteran driver with over a decade of experience, I know the tire pressure label for the Buick Excelle XT is usually on the sticker at the lower edge of the driver's side door frame—just look down when you open the door. It shows the recommended values for front and rear tires under different loads, mostly in bar or psi. If you can't find it, don't worry—there's usually a backup inside the fuel filler cap or in the owner's manual. Maintaining proper tire pressure is crucial—it reduces tire wear, saves fuel, and improves cornering stability. I recommend checking it monthly with a tire gauge when the car is cold to avoid risks during high-speed driving. Don’t ignore seasonal changes—tire pressure should be slightly higher in winter and moderate in summer, or else you'll feel more bumps. If the label is damaged, just get a new one from the dealership. Safety comes first—don’t overlook small details that affect driving.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

Is the BMW X6 Four-Wheel Drive or Two-Wheel Drive?

BMW X6 is a full-time four-wheel drive model. The BMW X6 is equipped with two engines, one is a 2.0-liter turbocharged engine, and the other is a 3.0-liter turbocharged engine. The 2.0-liter turbocharged engine delivers 265 horsepower and a maximum torque of 400 Nm. Here are some details about the BMW X6: Power: The new BMW X6 is four-wheel drive. This car is equipped with an on-demand four-wheel drive system, but since this system is based on rear-wheel drive, the BMW X6 primarily operates in rear-wheel drive mode most of the time. The powertrain used in the new BMW X6 is the same as that in the new BMW X5. The new BMW X6 comes with two engines, a 2.0-liter turbocharged engine and a 3.0-liter turbocharged engine. Suspension: The new BMW X6 features a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. This setup provides excellent handling and strong performance.
13
1
Share

How to Remove the Tie Rod on a Teana?

Teana tie rod removal method is as follows: 1. Use pliers and a flathead screwdriver to separate the dust boot from the steering gear. 2. Remove the bolt connecting the tie rod to the steering knuckle to separate them. 3. Remove the ball joint connected to the steering gear. 4. Install one end of the tie rod onto the steering gear and connect it to the steering knuckle with the bolt. 5. Tighten the dust boot. 6. Perform a four-wheel alignment to adjust the data within the normal range. Introduction to the Teana: 1. The Teana is a mid-size 4-door 5-seater sedan with a fuel tank capacity of 61.3 liters. 2. The Teana's body dimensions are: length 4901mm, width 1850mm, height 1450mm, with a wheelbase of 2825mm.
1
5
Share

What are the OEM brands for BMW's three filters?

The three filters in a car refer to: the fuel filter, air filter, and oil filter. The OEM brands for BMW's three filters are as follows: oil filter: Mann-Filter, air filter: Mahle, fuel filter: Mann-Filter. Additionally, the OEM brand for BMW's cabin air filter is also Mann-Filter. The functions of the three filters are as follows: Air filter: The air filter (AirFilter) is mainly used in pneumatic machinery, internal combustion machinery, and other fields. Its function is to provide clean air for these mechanical equipment to prevent them from inhaling air containing impurities and particles during operation, thereby reducing the likelihood of wear and damage. Fuel filter: The main function of the fuel filter is to filter out impurities in the gasoline. Oil filter: The oil filter, also known as the oil element, is used to remove impurities such as dust, metal particles, carbon deposits, and soot particles from the oil to protect the engine. The oil filter should have the characteristics of strong filtration capability, low flow resistance, and long service life.
13
3
Share

What are the differences between imported and domestically produced Audi vehicles?

Audi imported and domestically produced differences are: 1. Different wheel sizes: Imported Audi models are equipped with 20-inch wheels; domestically produced models come with 17-inch and 19-inch wheels. 2. Different wheelbase: The wheelbase of imported Audi is 2800mm; domestically produced models have a wheelbase of 2733mm. 3. Different front grilles: The imported Audi's front grille and fog lights feature chrome plating; domestically produced models lack chrome treatment on these parts. Here are some introductions about Audi vehicles: 1. Main models: Audi A3, Audi A5, Audi A6L, Audi Q3, Audi S4, etc. 2. Taking Audi A6L as an example, its front suspension is a five-link independent suspension, rear suspension is also five-link independent suspension, equipped with a 2.0T turbocharged engine producing maximum power of 190PS (140kW) and maximum torque of 320Nm, matched with a 7-speed dual-clutch transmission.
17
5
Share

Why is Car Modification Illegal?

Laws and regulations impose restrictions on car modifications. The vehicle model, engine model, and chassis number cannot be altered, and the body structure must not be compromised. If the car's color is changed, or the engine, body, or chassis is replaced, the vehicle must be inspected. Additionally, replacing the engine, body, or chassis requires submitting a valid motor vehicle safety inspection certificate. Decals or stickers must not cover more than 30% of the total body area. However, there are cases where car modifications are not illegal. Changing the car's color: It is permissible to change the car's color, but avoid using camouflage patterns, fire engine red, emergency vehicle yellow, or law enforcement's white-and-blue scheme. Most importantly, remember to complete the modification registration at the vehicle management office within ten days and obtain a new driving license. For those who wish to add decals, ensure the coverage does not exceed 30% of the car's body area. Important notes: In principle, modifications are allowed as long as they do not affect driving safety. However, seats cannot be removed, the interior structure must remain unchanged, and any structural features registered with the vehicle management office must not be altered without authorization.
4
2
Share

Does the BMW X3 need spark plugs replaced at 20,000 kilometers?

BMW X3 does not require spark plug replacement at 20,000 kilometers. The replacement interval for BMW X3 spark plugs is 40,000 kilometers. If spark plugs are not replaced for a long time, it can lead to various issues such as leakage in the vehicle's ignition system, increased fuel consumption, reduced power, and most importantly, difficulty in starting, affecting the normal use of the vehicle. Spark plug replacement interval: Under normal maintenance conditions, replacement is recommended at 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it is advisable to follow the user manual. The following standards can be used as a reference for maintenance replacement: platinum spark plugs should be replaced at 40,000 kilometers, standard nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the engine's plastic cover, and remove the high-voltage wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage wires in the order of the firing sequence and secure the cover.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.