···
Log in / Register

Where is the tire pressure indicator for the Buick Verano?

1 Answers
OJeffrey
07/28/25 10:01am

Buick Verano is equipped with an active tire pressure monitoring system, and you can usually check the specific tire pressure values on the instrument panel. For the new Buick Excelle, the tire pressure monitoring can be viewed on the small screen in the middle of the instrument panel, while the base model does not have this feature. The steps to check the tire pressure are as follows: Press the 'MENU' button on the turn signal lever to switch the small screen on the instrument panel to the 'Vehicle Information Menu'. The Vehicle Information Menu has only two pages: overspeed alarm and tire pressure monitoring. The fuel mileage information menu has many contents. Press the MENU button to switch to the Vehicle Information Menu. If the overspeed alarm is displayed at this time, rotate the knob at the top of the left lever again to switch to the tire pressure monitoring information, where the tire pressure of all four wheels can be viewed.

Was this review help?
11
5
Share
More Forum Discussions

What is the main function of seat belts in motor vehicles?

Automotive seat belts are safety devices designed to restrain occupants during a collision, preventing secondary impacts with the steering wheel, dashboard, or other interior components, as well as avoiding ejection from the vehicle which could lead to fatalities or injuries. Seat belts, also referred to as safety harnesses, are a type of occupant restraint system. The main structural components of automotive seat belts are as follows: 1. Webbing The webbing is a strap approximately 50mm wide and 1.2mm thick, woven from synthetic fibers such as nylon or polyester. Depending on its intended use, the weaving method and heat treatment are tailored to meet the required strength, elongation, and other characteristics of the seat belt. It also serves as the component that absorbs collision energy. Different countries have varying regulatory requirements for seat belt performance. 2. Retractor This device adjusts the length of the seat belt based on the occupant's seating position and body size, and retracts the webbing when not in use. 3. Anchorage system The anchorage system includes components such as the buckle, tongue, anchor pins, and anchor plates. The buckle and tongue are mechanisms for fastening and releasing the seat belt. The end of the webbing fixed to the vehicle body is called the anchor plate, the vehicle body's fixed point is referred to as the anchor, and the bolt used for fixation is known as the anchor bolt.
6
2
Share

Can antifreeze of the same color be mixed?

Antifreeze of different colors cannot be mixed. Different colors of antifreeze indicate different compositions. Mixing antifreeze with different compositions can cause chemical reactions, leading to antifreeze failure and sometimes even solidification. Even if the antifreeze is the same color, if it comes from different brands, the stabilizers may differ, and mixing them can reduce cooling and cleaning effectiveness. Therefore, it is best not to mix them. Ideally, use antifreeze of the same brand and color. If antifreeze is accidentally mixed, the antifreeze in the radiator must be completely drained, rinsed with purified water, and then refilled. Antifreeze typically comes in colors such as green, blue, and pink, with some having fluorescent effects. Generally, ethylene glycol is green, propylene glycol is blue, and glycerol is pink. The reasons manufacturers dye antifreeze different colors are as follows: Prevent mixing: To avoid confusion with other liquids and prevent accidental ingestion, many manufacturers add different color formulations for distinction. Easy identification of leaks: When the engine leaks, the color makes it easy to identify during inspection and repair. Safety considerations: These chemical components in the engine are toxic, so liquids like windshield washer fluid and antifreeze are dyed to prevent accidental ingestion.
14
4
Share

Should You Reverse into the Parking Space from the Left or Right First?

When reversing into a parking space, you should first reverse into the right space, then the left space. Here are the techniques for reversing into a parking space: 1. Reversing from the starting point into the garage: After the car enters the garage, the driver should look back at the left rearview mirror. When the entire left boundary line of the garage appears, immediately straighten the steering wheel. Stop the car when the left door handle is level with the garage's bottom line as seen in the left rearview mirror. 2. Driving from the garage to the turnaround point: Shift the car into 1st gear and drive out of the garage. When the hood of the car approaches the road boundary line, turn the steering wheel to the extreme left position, then stop when the car is straight. 3. Reversing from the turnaround point into the garage: Shift the car into reverse gear. Keep the steering wheel in the extreme left position and reverse backward. The driver should carefully observe the left rearview mirror and adjust the direction to guide the rear of the car into the garage. After the car enters the garage, the driver should observe the right rearview mirror. When the entire right boundary line of the garage appears, immediately straighten the steering wheel. Then, shift focus to the left rearview mirror and stop the car when the left door handle is level with the garage's bottom line.
20
2
Share

How Long Can the Zhe A License Plate Quota Be Retained After Selling a Car in Hangzhou?

According to the current regulations of the Hangzhou Quota Center, after completing procedures such as vehicle transfer registration or cancellation registration, the vehicle management office will automatically update the quota within approximately 7 working days. The updated quota is valid for one year, meaning that after selling the car, the quota can be retained for one year without being used for vehicle registration. If the quota remains unused after one year, it will automatically expire and become invalid. Additional Information: 1. Zhe A Regional License Plate: This refers to the special license plate for small passenger vehicles registered using regional quotas. Currently, the combination format for these plates is as follows: the second and fifth digits or the third and fourth digits after 'Zhe A' are letters, with the remaining characters being numbers. The registration process for Zhe A regional license plates is the same as the original requirements in terms of procedures and required documents, except for the different quota category used. 2. License Plate Nature: Whether purchasing a new or used car, using an incremental quota or an updated quota will result in a Zhe A license plate, while using a regional quota will result in a Zhe A regional license plate. If a small passenger vehicle with a Zhe A regional license plate applies for another quota due to reasons such as divorce, inheritance, or allocation, the vehicle will still retain the Zhe A regional license plate after transfer.
1
4
Share

Is it necessary to replace a broken car underbody shield?

It is necessary to replace a broken car underbody shield. The need for an underbody shield depends on the driving area. Installing an underbody shield can prevent the intrusion of mud and sand, effectively protecting the engine. It also effectively prevents the intrusion of rain, snow, and acidic water sources, protecting the engine or related chassis components from premature aging, corrosion, and rust. Here are other factors to consider when installing an underbody shield: Reduced heat dissipation performance, which can affect the engine's cooling to some extent. Prone to causing abnormal noises due to prolonged use or installation issues, which may lead to loosening, displacement, and resulting noises. Easy accumulation of foreign objects. Due to certain gaps, foreign objects (such as small stones) may get stuck (between the shield and the engine bottom) or roll on top of the shield, causing noises. More difficult maintenance. For example, routine maintenance of certain car models may require an additional step of removing and reinstalling the shield. Replacement method: It should be done at a repair shop because before installing the underbody shield, some pre-treatment of the chassis is required, such as simple cleaning and rust removal. After lifting the vehicle, align the shield and secure it with screws.
9
5
Share

What does 2.5G Camry mean?

In 2.5G Camry, 2.5 refers to the displacement, and G represents the engine model. The following is a detailed introduction about Camry: 1. Overview: Camry is a model under GAC Toyota. Its main advantages are a grand appearance, fewer minor issues, and relatively good fuel efficiency. The main disadvantage is poor handling. 2. Others: The eighth-generation Camry features dual styling designs for the luxury version and the sports version, both of which are derived from Toyota's latest "Keen Look" design language. It is equipped with Toyota's latest Toyota Safety Sense, including the PCS pre-collision safety system, LDA lane departure alert system, etc.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.