Where is the tire pressure displayed in the 2021 Sagitar?

[Haymitch]

The tire pressure data of the 2021 Sagitar is displayed on the instrument panel, as this model features an automatic tire pressure monitoring system. Additionally, if the tire pressure is insufficient or the tire is punctured or impacted, a tire pressure warning will appear on the dashboard. After troubleshooting, long-press the tire pressure monitoring button to clear the fault code. According to the international GBT2978-2008 standard, the normal tire pressure for different types of tires is as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: Should not exceed 3.5bar. Hazards of overinflated tires: Reduced friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction with the road surface, leading to higher fuel consumption; causes heavy steering and deviation, posing safety risks; increases movement of tire parts, leading to abnormal heat generation due to excessive rolling; reduces the functionality of cords and rubber, causing delamination or cord breakage and excessive friction with the rim, damaging the tire bead and causing abnormal wear; multiplies friction with the ground, sharply raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving may lead to tire blowouts. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no seal on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Typically alerts when pressure is below 1.8bar or above 3.0bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the indicator light to remain on. Simply reset the tire pressure to resolve this. Damaged tire pressure sensor: The sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged during driving, the tire pressure warning light will illuminate. For sensor damage, replacement with a new part is the only solution.