Where is the tire pressure display for the 2020 RAV4?

1 Answers
McAllison
07/29/25 2:04pm
The tire pressure display for the 2020 RAV4 is located on the central LCD screen of the vehicle's instrument panel. It can display the tire pressure in real-time, which is an excellent feature that fully ensures driving safety by allowing drivers to monitor whether the tires are underinflated and replenish them promptly for better vehicle performance. The RAV4 is a model under FAW Toyota, with body dimensions of 4265mm in length, 1785mm in width, and 1705mm in height, and a wheelbase of 2660mm. In terms of exterior design, the RAV4 features sharply contoured headlights with crystal-clear halogen headlights that can be manually adjusted horizontally, expanding the illumination range forward and to the sides for safer nighttime driving. The front grille has been updated from a diamond pattern to a more popular honeycomb design, complemented by refined fog lights and chrome accents.
Was this review help?
13
4
Share
More Forum Discussions

What are the causes of drive axle oil leakage?

The reason is that the rubber sealing ring is subjected to alternating changes in temperature for a long time, causing the sealing ring to lose a large amount of plasticizers and softeners, resulting in corrosion, aging, and hardening. Initially, oil seeps out, and gradually, oil dripping occurs. Over time, the sealing ring may break. Below is more information about drive axle oil leakage: 1. There are several obvious locations for drive axle oil leakage. For the central reducer, oil leakage often occurs at the input shaft, usually due to damage or wear of the input shaft oil seal, or relaxation of the oil seal spring. 2. During maintenance, it should be noted that if oil leaks from the outer ring of the oil seal, it indicates a loose fit between the outer ring of the oil seal and the housing. 3. During reassembly, the outer ring of the oil seal and the oil seal seat hole of the housing should be thoroughly cleaned, and adhesive should be applied to the outer ring of the oil seal before installing it into the seat hole.
16
0
Share

How to set up the navigation system in Audi A6?

The method to set up the navigation system in Audi A6 is: 1. After starting the vehicle's engine, press the menu button; 2. Activate the navigation through the voice function; 3. Select the navigation destination via MMI. The Audi A6 is a mid-to-large size 5-door, 5-seater station wagon with body dimensions of 4951mm in length, 1886mm in width, and 1483mm in height, with a wheelbase of 2925mm and a fuel tank capacity of 73 liters. The Audi A6 is equipped with a 2.0T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 140 kilowatts and a maximum torque of 320 Newton-meters. It features front-wheel drive and uses five-link independent suspension for both front and rear axles.
19
1
Share

What time is the second session of the Subject 4 exam at Changzhou Vehicle Management Office?

Changzhou Vehicle Management Office's second session of the Subject 4 exam starts after 9:00 AM. Subject 4 Retake: There is no limit to the number of retakes for the Subject 4 exam, and no additional fees are required for retakes. Subject 2 and Subject 3 Retakes: For both Subject 2 and Subject 3 exams, an immediate retake is allowed once. If the retake is also unsuccessful, candidates must continue practicing before scheduling the next exam. Each subject allows for five exam scheduling attempts, with each attempt including one retake opportunity. Therefore, candidates effectively have 10 exam attempts per subject. If a candidate fails to pass any subject after five scheduling rounds (totaling 10 exam attempts), they must restart the process from Subject 1.
12
5
Share

How to reset the tire pressure of Roewe RX5?

The method to reset the tire pressure of Roewe RX5 is: 1. In the vehicle control interface, touch 'Driving Maintenance' to enter the tire pressure reset interface; 2. After confirming that the tires are problem-free, touch 'Start' while the vehicle is parked to perform the reset operation. The Roewe RX5 is a compact 5-door, 5-seat SUV with body dimensions of 4556mm in length, 1855mm in width, and 1719mm in height, with a wheelbase of 2700mm. The Roewe RX5 is equipped with a 1.5T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 124 kW and a maximum torque of 250 Nm. It features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using multi-link independent suspension.
17
5
Share

How to resolve the yellow engine light issue in Mercedes-Benz C260?

The solutions for the yellow engine light issue in Mercedes-Benz C260 are as follows: 1. Pull over and park the car, turn off the engine for 5-10 minutes. Without pressing the brake pedal, press the start button once, or without depressing the clutch, turn the key halfway to the 'on' position. The car will initiate a self-check function after powering on. Wait for 5-10 seconds and observe whether the warning lights on the dashboard turn off, leaving only the engine warning light. 2. If other warning lights remain illuminated, it is necessary to take the car to a 4S shop or repair shop to inspect the corresponding modules and components. If only the engine warning light remains on, start the engine again and observe whether the engine warning light persists. 3. If the engine warning light turns off, no further action is needed. If the engine warning light remains on, take the car to a 4S shop or repair shop to inspect the engine-related components and modules.
19
4
Share

Does Installing an Engine Guard Plate Affect New Car Registration?

Installing an engine guard plate on a new car does not affect its registration. Daily Driving: During daily driving, the wheels can pick up debris from the road, such as mud, rainwater, etc. These substances may cause corrosion to the exposed components of the car's undercarriage. Installing an engine guard plate can help protect these components from wear and tear. Engine Guard Plate: An engine guard plate is a custom-designed protective device for the engine, tailored to various car models. Its primary purpose is to prevent mud from covering the engine and to protect the engine from damage caused by uneven road surfaces during driving. Through its design, it extends the engine's lifespan and prevents breakdowns due to external factors during travel. Safety Performance: In the event of a severe collision, the engine is designed to sink downward to prevent it from moving backward into the passenger compartment, which could harm the occupants. However, if an engine guard plate is installed, this safety feature may be hindered, potentially increasing the risk of injury to the passengers.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.