Where is the tire pressure button on the Baojun 510?
2 Answers
The tire pressure reset button for the Baojun 510 is located below the cigarette lighter. The tire pressure reset is an operation to reset the tire pressure monitoring system after resolving a tire pressure fault. Tire pressure reset method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "ding" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the dashboard warning light will turn off. Solutions for insufficient tire pressure: If no visible damage is detected, simply inflate the tire to the normal pressure and reset the tire pressure system. If a puncture is found upon inspection, drive to a tire repair shop promptly to fix the puncture, then reinflate the tire. If the tire pressure warning reappears some time after inflation without any punctures, it may be due to air leakage caused by a deformed wheel rim. It is recommended to check the wheel rim and replace it if necessary.
After driving the Baojun 510 for several years, I learned that the tire pressure button is a crucial feature for checking tire pressure. It's located on the control lever on the left side of the steering wheel, near the instrument panel area. I often use it to check tire pressure, especially before long trips. The operation is very simple: after starting the vehicle, just press that small button, and the instrument panel will display the pressure value of each tire. The Baojun 510's tire pressure monitoring system is quite practical, helping to prevent issues like tire blowouts or increased fuel consumption. I believe car owners should develop a habit of regular checks, such as once a month, to detect air leaks or rim damage early. Note that if the values are abnormal, a warning light will illuminate—this is no joke. Maintaining proper tire pressure not only saves money but also ensures safety.