Where is the thermostat located on the Haval H6?

1 Answers
DiAlaina
07/30/25 2:41am
The thermostat of the Haval H6 is located at the connection point between the lower water pipe and the engine block, near the end of the generator. The car thermostat is a valve that controls the flow path of the coolant, serving as an automatic temperature-regulating device. Its function is to automatically adjust the amount of water entering the radiator based on the coolant temperature, altering the water circulation range and regulating the cooling system's heat dissipation capacity to ensure the engine operates within an appropriate temperature range. The Haval H6 is a compact 5-door, 5-seat SUV with body dimensions of 4653mm in length, 1886mm in width, and 1730mm in height, with a wheelbase of 2738mm. It is equipped with a 2.0T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 155 kW and a maximum torque of 325 Nm. The drive system is front-wheel drive, with a MacPherson independent suspension at the front and a multi-link independent suspension at the rear.
Was this review help?
7
1
Share
More Forum Discussions

Does Subject 4 require an appointment?

Subject 4 requires an appointment, but in some regions, you can take the Subject 4 exam directly after passing the Subject 3 exam. Once you pass the Subject 4 exam, you can obtain your driver's license immediately. The Subject 4 exam, also known as the safe and civilized driving knowledge test, is the final stage of the driver's license examination. After passing Subject 3, you can schedule an appointment for Subject 4. It may take about a week for a driving school to schedule the Subject 4 exam, but you can also make an appointment online yourself, which usually takes about two to three days to be confirmed. Here is more related information: Subject 4 exam content: The Subject 4 exam mainly includes requirements for safe and civilized driving operations, knowledge of safe driving under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and knowledge of post-accident procedures. Subject 4 is also referred to as the theoretical exam or driver theory test, focusing on 'driving ethics.'
10
4
Share

What are the requirements for upgrading from a C1 to an A1 driver's license?

Requirements for upgrading from a C1 to an A1 driver's license: The A1 license is the highest-level passenger vehicle driving license. To upgrade to an A1 license, you must first upgrade to a B license before you can upgrade to an A1. The prerequisite for upgrading to a B1 license is holding a C1 license for at least two years, being between 20 and 60 years old, and having no record of accumulating 12 penalty points in the two most recent scoring cycles before applying, with no outstanding traffic violations. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" of the People's Republic of China, the following conditions must be met for upgrading to an A1 (large passenger vehicle) license: You must have held a B1 (medium-sized passenger vehicle) or B2 (large truck) license for at least five years, or held a tractor license for at least two years, with no record of accumulating 12 penalty points in the five most recent consecutive scoring cycles before applying. If you hold a B1 or B2 license, you can upgrade to an A1 license by meeting the following conditions: Hold an A3 or B1 license for at least two years, or a B2 license for at least three years, or an A2 license for at least one year. There should be no record of accumulating 12 penalty points in the three most recent consecutive scoring cycles before applying, and you must be between 22 and 60 years old. The A1 license permits driving large passenger vehicles and also allows driving vehicles under the A3, B1, B2, C1, C2, C3, C4, and M license categories. A1 license examination subjects: Subject 1: Tests basic knowledge of road traffic safety laws and regulations, traffic signals, and driving rules. Subject 2: Includes 16 items such as road stakes, hill starts, parallel parking, single-plank bridge crossing, curve driving, right-angle turns, narrow gate passage, continuous obstacle passage, bumpy road driving, narrow road U-turns, simulated highways, continuous winding mountain roads, tunnels, rain (fog) conditions, slippery roads, and emergency handling. Subject 3: Includes pre-driving checks, starting, straight driving, gear shifting, lane changing, pulling over, driving straight through intersections, left turns at intersections, right turns at intersections, pedestrian crossings, school zones, bus stops, picking up passengers, overtaking, U-turns, and night driving. Local authorities may also add complex road conditions such as mountainous areas, tunnels, and steep slopes based on actual conditions. The final part tests safe and civilized driving knowledge. Subject 4: Examines safe and civilized driving knowledge, including operational requirements, safe driving under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling procedures.
11
1
Share

What are the new items added to Subject 2?

New items added to Subject 2: Some regions have added simulated tunnel driving and simulated rain (fog) and wet road driving, totaling 7 items; while in Shanghai, Subject 2 includes 9 items, with the addition of simulated tunnel driving, parking to pick up a card, emergency stopping, and narrow road U-turns. Here are some important notes regarding the Subject 2 test: Adjust the seat properly: Before starting, you must adjust the seat and fasten the seatbelt before fingerprint verification. Follow the test item rules: Each test item in the examination area is monitored by GPS positioning. The control line (yellow dotted line) of each item represents the test area for that item. Once the front of the vehicle crosses the control line, it means you have entered the test area for that item and must complete the test according to its rules. Correct mistakes promptly: If you notice an operational error, correct it promptly to ensure accuracy and reduce the chance of point deductions.
6
4
Share

How to Call for Fuel Delivery When Your Car Runs Out of Gas?

Car owners can call the local road administration hotline to request fuel delivery assistance from staff, though a service fee will apply. Fuel Delivery Pricing: The base price for emergency fuel delivery typically starts at 100 yuan, with additional charges calculated based on the amount of fuel required and the vehicle's location. Fuel Delivery Precautions: Some auto insurance policies include complimentary fuel delivery services, so it's advisable to check your insurance coverage before calling for assistance. If your vehicle runs out of fuel on the road, first move it to a safe area, activate hazard lights, and place a triangular warning sign 50-100 meters behind the vehicle (150-200 meters on highways). In windy conditions, secure the warning sign with rocks to prevent it from being blown over, ensuring your safety. After setting up the warning sign, return to your vehicle to await fuel delivery.
20
3
Share

What is the appropriate age to get a driver's license?

According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses", the minimum age requirement for a regular passenger vehicle driving license, i.e., C1 and C2 licenses, is 18 years old. The appropriate age for different license types matching various vehicle models also varies. Here are the detailed requirements: Application for urban bus, trolleybus, or tram driving license: between 20 and 50 years old. Application for large truck driving license: between 20 and 60 years old. Application for tractor driving license: between 22 and 50 years old. Application for medium-sized passenger vehicle driving license: between 21 and 60 years old. Application for large passenger vehicle driving license: between 22 and 60 years old.
4
2
Share

What are the evaluation criteria for hill-start and stopping at a designated point?

Hill-start and stopping at a designated point deduction criteria: 1. Designated point stopping: Failure to stop at the designated point results in a 100-point deduction. 2. Control line: If the front bumper of the vehicle does not reach the control line after stopping, a 100-point deduction is applied. 3. Rolling back: Rolling back more than 30 cm after stopping results in a 100-point deduction; rolling back less than 30 cm after stopping leads to a 10-point deduction. 4. Crossing the line: Driving over the solid edge line of the road during movement results in a 100-point deduction. If the right front wheel is more than 30 cm away from the edge line when stopping, a 10-point deduction is applied. Taking more than 30 seconds to start results in a 100-point deduction, and failing to engage the handbrake when stopping leads to a 10-point deduction.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.