Where is the tailgate cable of the Ford EcoSport located?

2 Answers
DaniellaRose
09/07/25 2:20am
Ford EcoSport tailgate cable is located under the trunk. Here are the solutions for an unopenable trunk: 1. Press the button: Hold the trunk opening button on the remote for three seconds. 2. Unlock button: Press the button next to the high-mounted brake light when the doors are unlocked. The trunk can be opened or closed electrically or via remote control. To open the trunk, simply press the button inside the car or on the remote key, and the trunk will open automatically. To close the trunk, press the close button inside the trunk, the close button inside the car, or the remote key, and the trunk will close automatically.
Was this review help?
19
3
Share
DelEli
09/18/25 8:38am
As someone who frequently tinkers with my car, I find that the tailgate release cable on the Ford EcoSport is primarily located near the locking mechanism inside the tailgate. You'll need to open the trunk first to see it. Lifting the inner plastic cover or mat of the tailgate usually exposes the cable connector, which links to the manual release mechanism or handle. If the cable breaks or gets stuck, the trunk won't open—common causes include wear from frequent use or rust, affecting smooth operation. I recommend regularly checking the cable's condition and applying a small amount of lubricant for maintenance to extend its lifespan. If you can't locate it, refer to the Ford EcoSport owner's manual, which includes diagrams showing the exact position and replacement steps. Avoid yanking it forcefully to prevent damage to other components. If you're unsure, seek help from a car-savvy friend or visit a service station for a quick, safe, and reliable fix.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

Does BMW Have Manual Transmission?

BMW does have models with manual transmission, including the BMW M4, BMW M2, BMW 1 Series, and imported 3 Series. Below is an introduction to manual transmission vehicles: Introduction to Manual Transmission Vehicles: A manual transmission vehicle uses a manual shift mechanical transmission (also known as manual transmission, MT) to adjust the vehicle speed. This means the driver must manually move the gear lever to change the gear engagement inside the transmission, thereby altering the gear ratio to achieve speed changes. The gear lever can only be adjusted when the clutch is depressed. Characteristics of Manual Transmission Vehicles: Drivers can save fuel by selecting the appropriate gear. The commonly cited fuel efficiency of mechanical transmission vehicles is due to their higher transmission efficiency, which reduces power loss. Driving a manual transmission car requires excellent driving skills; by choosing the right gear at the right time, true fuel efficiency can be achieved. Manual transmission cars offer quicker acceleration, faster downshifting, and better speed control, allowing for more agile maneuvering. In contrast, automatic transmission cars are relatively slower to respond, and overtaking still requires pressing the accelerator twice.
14
5
Share

What are the standard requirements for the reverse parking test?

Not following the prescribed route or sequence, the vehicle body crossing the line, failing to park in the designated space, or stopping midway will all be judged as a fail. Below are the specific standards for reverse parking: Reverse parking operation requirements: During the test, the vehicle must not stop while moving forward or backward. The vehicle must reverse from one end of the road control line (with the vehicle body over the control line) into the parking space, then move forward out of the parking space, pass the control line at the other end, and reverse into the parking space again, finally moving forward out of the parking space. Reverse parking evaluation criteria: Not following the prescribed route or sequence: fail; Vehicle body crossing the line: fail; Failing to park in the designated space: fail; Stopping midway: fail. A fail results in a deduction of 100 points.
15
2
Share

What does 235/55r18 mean?

235 represents the tire's cross-sectional width of 235mm; 55 represents the tire's aspect ratio, with a higher value indicating a thicker tire; r stands for radial tire type, and 18 indicates the rim diameter of 18 inches. Below is relevant information about tires: Wear: Tires have wear indicators. There are triangular marks on the side of the tire, and when the tread wears down to the point indicated by the triangle, it is recommended to replace the tire. Inside the tire's tread grooves, there are also raised markers. When the tread wears down to the level of these raised markers, the tire should be replaced. Simple punctures can be repaired without needing replacement, but bulges must be replaced. Aging: Rubber oxidizes in the air, and oxidized rubber hardens, reducing grip. Therefore, even if a set of tires is not used, their lifespan will decrease. It is not recommended to use tires for more than 5 years from the production date. The production date is marked on the side of the tire.
10
0
Share

What documents are needed to pick up a new car?

Documents such as the vehicle ownership certificate and the vehicle license. There are three key points to note when inspecting a new car: 1. Check the paint surface: The uniformity and smoothness of the seams are the focus of inspection. It's best to compare with two cars of the same model. The gaps between the doors, bumper, and engine hood should be consistent. If the gaps are too large or the width differs from other cars, choose carefully; 2. Check the tires: The new car's tires should have no damage on the sidewalls, and the front tires should have no puncture marks on the tread. It's best if the tire hairs on both front and rear tires are intact, at least the rear tire hairs should be visible. If there are no traces of tire hairs on both front and rear tires, but the odometer shows only a few kilometers, it's abnormal; 3. Check the nameplate: Each car's nameplate corresponds to the unique engine number and chassis number of the vehicle. Verify the numbers with the certificate of conformity to ensure the codes match. Check the manufacturing date on the nameplate; the gap between the pickup time and the manufacturing time should not exceed three months.
4
4
Share

Which country does the Moro brand belong to?

Moro is a domestic independent motorcycle brand under Taizhou Senlong Motorcycle Manufacturing Co., Ltd. Here are some relevant details:1. Main production: The company primarily manufactures motorcycles, electric vehicles, scooters, and motorcycle accessories. Additionally, Senlong has years of motorcycle manufacturing experience, and Moro is a personalized motorcycle brand established after the company's transformation and upgrading.2. Configuration: The Moro 500MG motorcycle is equipped with a Loncin KE500 engine. Developed and produced entirely in China, it is a large-displacement cruiser model that combines comfort and safety, tailored to the physiological curves and riding habits of Asian riders.
4
5
Share

How Many Years Until a Family Car Requires Biannual Inspections?

Private cars require biannual inspections after 15 years. Below is relevant information: 1. Regulations: According to the relevant provisions of the Road Traffic Safety Law Implementation Regulations: Small and micro non-operational passenger vehicles must be inspected once every 2 years within the first 6 years; after 6 years, once a year; and after 15 years, once every 6 months. 2. Inspection content: Vehicles must pass regular tests including exhaust emissions, vehicle appearance, lights, brakes, chassis, etc., and must have no traffic violation records to receive an inspection pass mark. All inspection dates are based on the registration date listed on the vehicle license. From the date of registration, vehicles must undergo safety technical inspections according to the specified schedule, commonly referred to as annual inspections or annual reviews.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.