···
Log in / Register

Where is the Swift's charcoal canister located?

4 Answers
ElenaMarie
09/06/25 4:28am

Swift's charcoal canister is located between the car's engine and fuel tank. The usage of the car's charcoal canister is introduced as follows: 1. Adsorbing gasoline: The fuel tank is filled with gasoline vapor, and if the gasoline vapor cannot be effectively discharged, the pressure inside the fuel tank will increase, affecting the fuel pump's operation. The charcoal canister is generally installed between the fuel tank and the engine, utilizing the adsorption capacity of the activated carbon inside to adsorb and store the gasoline vapor from the fuel tank. 2. Opening the solenoid valve: When the engine starts, the solenoid valve between the charcoal canister and the intake manifold will open according to the ECU's command. At this time, the gasoline vapor in the charcoal canister will be drawn into the cylinder along with the air under the vacuum negative pressure of the intake pipe to participate in combustion.

Was this review help?
10
2
Share
OSebastian
09/18/25 4:22am

I've driven a Swift for several years, and the charcoal canister is usually located underneath the rear chassis of the car. Specifically, it's often near the spare tire compartment or the rear axle area. If you crawl under the car, you can feel a small canister-like component—that's what absorbs gasoline vapors to prevent odors and pollution. If it's hard to locate, I'd suggest starting the car in the morning and listening for unusual noises near the fuel tank, which could indicate a charcoal canister issue. This part tends to accumulate dust and clog, leading to increased fuel consumption—my friend's car had this problem, and a simple cleaning fixed it. When inspecting it yourself, bring a flashlight and gloves, ensure the ground is safe, and avoid accidentally touching other wiring. Regular maintenance saves money, extends the car's lifespan, and gives you peace of mind.

Was this review help?
2
1
Share
Expand All
Leanne
11/01/25 4:49am

I remember the carbon canister on my old Swift was positioned towards the rear of the body, to be precise, slightly left of center on the chassis. You had to be careful not to scrape it while driving, as it wasn't placed very high. Through my own research on cars, I found out that it's there to deal with fuel tank odors, and its location was designed for easy maintenance. If you're handy, you can roughly assess its condition just by lifting the trunk mat. If it fails, you'll notice a gasoline smell, and it can also affect engine efficiency. It's best to mention it during annual maintenance so the mechanic can take a quick look. Replacing it with a new one isn't expensive—just make sure to get a genuine part and don't delay until it causes bigger issues.

Was this review help?
4
3
Share
Expand All
LaRowan
12/15/25 4:57am

The charcoal canister of the Swift is usually fixed at the rear underside of the car, near the rear suspension. Its position is relatively low, so be mindful of road debris while driving. Its function is to capture fuel vapors and reduce emissions. I personally experienced a failed charcoal canister, which caused noticeable odors inside the car and increased fuel consumption. Timely inspection can prevent safety hazards.

Was this review help?
5
3
Share
Expand All
More Forum Discussions

How to Turn on the External Air Circulation in a Mercedes-Benz?

Method to activate external air circulation in Mercedes-Benz: First press the internal circulation button - the illuminated indicator signifies internal circulation. External circulation is engaged only when the indicator turns off. Therefore, the external circulation function shares the same button as internal circulation, which serves multiple purposes: 1. Briefly press the internal circulation button (indicator illuminates) to activate internal circulation; 2. Briefly press it again (indicator turns off) to switch to external circulation; 3. Long-press the button to automatically close/open all windows - particularly useful when encountering sudden smoke, dust, or polluted road conditions while driving with windows open. After enabling external circulation, the air intake located at the firewall is opened by the climate control system. The blower then draws outside air through the microfilters into the evaporator's dual heat exchangers. Conditioned air is subsequently discharged through the vents. Note: Certain Mercedes models automatically revert to external circulation after 5-10 minutes of forced internal circulation to maintain air quality and sufficient oxygen levels, explaining why outside air may still enter during internal circulation mode.
3
5
Share

What is the purpose of a bumper?

A bumper is an important safety device designed to absorb and mitigate external impacts, protecting the front and rear parts of the vehicle body. Typically located at the front and rear ends of the car, bumpers are mostly made of highly elastic materials such as plastic or resin, with some containing materials like silk fibers. The primary function of a bumper is to reduce the impact of minor collisions on the vehicle, and they are relatively easy to replace if damaged. Modern front and rear bumpers are made of plastic, commonly referred to as plastic bumpers, but not ordinary plastic. Generally, bumpers are made of ABS engineering plastic, utilizing computer-controlled painting processes with multiple layers of coating to achieve matte or mirror-like finishes. These bumpers do not fade or rust, fitting more seamlessly with the vehicle body while enhancing the texture of the front and rear aesthetics, all while protecting the car.
2
2
Share

What is the normal water temperature for a car?

Normal car temperature ranges between 80°C to 90°C. The car engine requires a specific operating temperature for normal functioning, as temperatures that are too high or too low can adversely affect engine operation and performance. Additionally, conventional air cooling is often insufficient to dissipate the heat generated by engine operation, which is why water cooling systems are widely used in car engines. The cooling system's role is to maintain the engine within the most favorable temperature range to enhance engine power, reduce engine wear, and minimize fuel consumption. Both excessively high and low temperatures can negatively impact engine performance. To ensure the engine operates within the normal temperature range, cars are equipped with an engine coolant temperature sensor, typically displayed separately on the dashboard. If the antifreeze temperature becomes too high, an alarm will be triggered.
5
2
Share

What to Do About Small Scratches on the Car?

Methods to deal with small scratches on the car: 1. Squeeze a small amount of toothpaste onto the scratch and gently rub it to remove the scratch. The fine particles in the toothpaste help polish away the scratch through rubbing; 2. Use a touch-up paint pen to eliminate the scratch. Shake the touch-up pen well before use to mix the paint evenly, then spray lightly on the scratched area; 3. Repair with car wax. If the scratch is very shallow and only affects the surface paint, you can apply car wax in straight-line motions to repair it. After the scratch disappears, use a finer compound to wipe and then apply wax. Make sure to choose high-quality wax, as poor-quality wax can worsen the paint damage.
14
0
Share

Is Painting Necessary When the Car's Primer is Exposed?

If the metal panel is not exposed, painting may not be necessary, but if the metal panel of the car body is exposed, painting is required. The following are the treatment methods for metal panel scratches of varying degrees: Minor Scratches: Minor scratches such as swirl marks only damage the surface layer of the paint. These scratches cause minimal damage to the paint and are relatively easy to repair, often solvable through waxing. You can start by using scratch remover wax, applying it with a waxing sponge to polish the scratched area, moving in a consistent clockwise or counterclockwise direction. Then, use a gloss-enhancing wax to make the painted surface appear shinier. Deep Scratches: If the scratch on the car body directly exposes the metal panel or the scratched area is larger than a fingernail, the damage has penetrated below the primer. In such cases, immediately take the car to a 4S shop or an auto beauty shop with a paint baking facility. The paint repair technician will reapply the anti-rust primer and perform a surface paint repair. If the damaged paint is not repaired promptly, corrosive substances can gradually oxidize, leading to rust and worsening of the damaged area, resulting in greater losses.
19
4
Share

Can an Automatic Transmission License Drive a Manual Transmission Car?

An automatic transmission license cannot drive a manual transmission car. An automatic transmission driver's license belongs to the C2 category. According to China's traffic regulations, a C2 license for small automatic transmission vehicles only permits driving small and micro automatic transmission passenger cars, as well as light and micro automatic transmission cargo vehicles. Driving a manual transmission car with a C2 license is equivalent to driving without a license and will be subject to severe legal penalties. If this results in a traffic accident causing casualties, the driver will also bear legal responsibility. Automatic transmission cars typically use hydraulic transmission devices to replace the mechanical clutch of manual transmission cars, so they do not have a clutch pedal. When the engine speed is low, the torque transmitted by the fluid is limited and insufficient to propel the car forward. When the gear lever is placed in the drive position and the brake pedal is released, as the throttle is applied and the engine speed increases, the transmitted torque increases, pushing the car forward. If a highly skilled driver of a manual transmission car is compared to driving an automatic transmission car, under the same driving conditions, the automatic transmission car will consume more fuel than the same model with a manual transmission, approximately 1 liter more per 100 kilometers. Additionally, the cost of an automatic transmission is higher than that of a manual transmission for the same model. The advantage of an automatic transmission over a manual transmission lies in its ease of driving.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.