Where is the sunroof drainage hole of the Tiguan L?

What is the actual fuel consumption of the Corolla Hybrid?

The Corolla Hybrid has three models currently on sale. Among them, the Corolla-2021-Dual Engine-1.8L-E-CVT Elite Edition and Flagship Edition, both equipped with a 98-horsepower engine, have an NEDC fuel consumption of 4.1L per 100 km. The Corolla-2021-Dual Engine-1.8L-E-CVT Pioneer Edition, also equipped with a 98-horsepower engine, has an NEDC fuel consumption of 4.0L per 100 km. All Corolla Hybrid models have the same fuel tank capacity. The distance that can be covered on a full tank of fuel is as follows: For the Corolla-2021-Dual Engine-1.8L-E-CVT Elite Edition and Flagship Edition, both equipped with a 98-horsepower engine, the fuel tank capacity is 43L, and the distance that can be covered on a full tank is 43/4.1*100=1049 km. For the Corolla-2021-Dual Engine-1.8L-E-CVT Pioneer Edition, also equipped with a 98-horsepower engine, the fuel tank capacity is also 43L, and the distance that can be covered on a full tank is 43/4.0*100=1075 km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger engine displacement generally consume more fuel than those with smaller displacement because larger displacement usually means higher power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperature: When the engine block is cold, the injected gasoline does not atomize easily during cold starts, requiring more gasoline to burn, which increases fuel consumption. Additionally, at low temperatures, the engine control unit will command higher RPMs to warm up the engine, further increasing fuel consumption.

16

3

Share

Will stopping halfway through running a red light result in penalty points?

When the entire vehicle crosses the stop line, meaning both front and rear wheels have passed the stop line but have not crossed the opposite stop line, it is referred to as over-the-line stopping. Running a red light is clearly defined in the Road Traffic Safety Law. Article 26 states that traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light permits passage, and a yellow light serves as a warning. A red light is a traffic signal prohibiting passage, and if a vehicle proceeds through an intersection when the light is red, it constitutes the traffic violation of running a red light. Running a red light refers to the act where the vehicle, while still behind the stop line, continues to move forward despite the traffic light being red, ultimately resulting in both front and rear wheels crossing the stop line. This is determined through three photos captured by electronic cameras: A photo showing the vehicle crossing the intersection stop line, including the red light signal and license plate number. A photo showing the vehicle completely past the stop line, including the red light signal and license plate number. A photo showing the vehicle continuing to move, with changes in vehicle position compared, including the red light signal and license plate number. Capturing these three photos confirms the act of running a red light. Running a red light is not considered a violation under the following circumstances: Extreme weather: When visibility is so low that even electronic police cannot clearly see the traffic lights. The photos of the violation may be blurred, and if the red light was run unintentionally, traffic police will not impose penalties. Emergency situations: If a citizen transports a critically ill patient and provides proof from the hospital or the person being assisted, they can verify this with traffic police. If confirmed, the violation record can be cleared. If possible, it is best to call an ambulance to avoid accidents caused by running a red light. Police direction: During peak commuting hours, traffic police may temporarily direct traffic at important intersections. Drivers must follow the hand signals of the traffic police. Yielding to special vehicles: When yielding to special vehicles such as ambulances or fire trucks, if the act is captured by surveillance cameras, manual review will not record the red light violation. Even if recorded, one can apply for reconsideration with the traffic police department.

8

2

Share

Can the ETC device be used without sticking it?

It is possible to use the ETC device without sticking it to the windshield. As long as the induction device at the highway toll station can detect the ETC device, it can be placed on the car's dashboard or held up manually when passing through the toll station. ETC (Electronic Toll Collection) is an electronic toll system. When a vehicle equipped with an ETC device passes through a toll station, the induction device at the toll station detects the ETC device on the vehicle, automatically matches the information, and completes the deduction and release process. ETC Working Principle: Through the on-board electronic tag installed on the vehicle's windshield, dedicated short-range communication is established with the microwave antenna in the ETC lane at the toll station. Computer networking technology is used for backend settlement processing with the bank, enabling vehicles to pass through highway or bridge toll stations without stopping while still paying the toll. ETC Billing Principle: The toll amount for ETC vehicles is rounded according to the "round down if less than 0.5, no change if 0.5 or more" rule (i.e., amounts with a decimal less than 0.5 are rounded down, while those with a decimal of 0.5 or more remain unchanged). After a 5% discount, the amount is then rounded to the nearest cent. MTC vehicles still follow the "round to the nearest yuan" rule. All of this is based on the principle of "pass first, deduct later." Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Low-carbon, as vehicles pass through toll stations without stopping, reducing noise and emissions and minimizing pollution; Reduced wear and tear: Saves costs by reducing the frequency of vehicle starts and stops, lowering wear and fuel consumption; Improved efficiency: Theoretically, ETC lanes can process vehicles 2-3 times faster, making traditional ETC more advanced, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, intercity transportation smart cards should be widely implemented in key city clusters, and the proportion of vehicles equipped with ETC should significantly increase." It also set a target in the "13th Five-Year" comprehensive transportation development indicators: "By 2020, the ETC usage rate for road passenger vehicles should reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and increasing the adoption rate among passenger vehicles, efforts will also be made to promote ETC usage among trucks and explore deeper integration of the ETC system with vehicle-to-vehicle communication, vehicle-to-infrastructure coordination, and other smart transportation developments. This will provide car owners with comprehensive travel services, meaning more application scenarios will support ETC usage.

2

1

Share

How to Turn On the Ambient Lights in the 2021 Tiguan L?

The headlight switch is located on the far right side of the dashboard. First, press the headlight switch, then rotate it clockwise. Check if the instrument panel and air conditioning buttons inside the car display a fluorescent effect. To turn off, rotate the switch counterclockwise, and the switch will automatically rebound.

18

5

Share

What is the method for adjusting the tie rod?

If the vehicle experiences insufficient tie rod near the apex, the camber angle should be increased to enhance the front wheels' grip. For rear-wheel-drive models preparing to exit a corner with insufficient tie rod, lowering the front axle height can counteract the force. Improving the effectiveness of the limited-slip differential can also resolve this issue.

20

2

Share

How to Set Up Auto-Lock for Mazda6

First, turn the ignition switch to the "ON" position. Press and hold the "Lock" button on the driver's side door for about 5 seconds until you hear a beep, then release it. The auto-lock function will be successfully activated. Always remember to lock your doors before driving to develop good habits and ensure safe driving.

7

4

Share

Where is the sunroof drainage hole of the Tiguan L?

What is the actual fuel consumption of the Corolla Hybrid?

Will stopping halfway through running a red light result in penalty points?

Can the ETC device be used without sticking it?

How to Turn On the Ambient Lights in the 2021 Tiguan L?

What is the method for adjusting the tie rod?

How to Set Up Auto-Lock for Mazda6

How Many Degrees to Turn the Steering Wheel When Making Right and Left Turns?

What are the body dimensions of the Volkswagen Tharu?

What are the safety features of the BYD e2?

What brand is the Korando?