Where is the sunroof drain outlet of Roewe?

1 Answers
Holden
09/02/25 7:00am
The location of the sunroof drain outlet varies depending on the model. However, generally speaking, the sunroof drain holes are located at the A-pillar and C-pillar of the car. In addition, there are also air conditioning drain holes, engine compartment drain holes, door drain holes, fuel tank drain holes, and exhaust pipe drain holes on the car. The maintenance methods for the sunroof are as follows: 1. The frequency of sunroof use should not be too high: Although the sunroof is also part of the car window, its mechanical structure is different from that of the car doors and windows, and it is much more delicate. Therefore, the frequency of use should not be too high. 2. Do not open the sunroof immediately when the car is cold in winter: Winters in the north are extremely cold, and after the car has been parked overnight, the edges of the sunroof may be frozen by dew, making it temporarily impossible to open. At this time, the owner must not open the sunroof immediately, because the snow in the sunroof groove will increase the resistance to opening the sunroof, and blindly operating the sunroof may cause the sunroof switch motor to burn out.
Was this review help?
14
5
Share
More Forum Discussions

Where is the Yuchai engine drain valve located?

The Yuchai engine drain valve is also located on the engine block. Check both sides of the block; the one connected by an iron rod is the drain valve. Operating conditions of the drain valve: The drain valve on the Yuchai engine block operates under conditions of high temperature, high pressure, high speed, and poor lubrication. The piston is in direct contact with high-temperature gases, with instantaneous temperatures reaching over 2500K. As a result, it is severely heated, and the heat dissipation conditions are poor, leading to very high operating temperatures for the piston, with the top reaching 600-700K, and the temperature distribution being highly uneven. Effects of high temperature on the piston: The piston moves back and forth in the cylinder at high speeds (8-12m/s), with constantly changing velocity, which generates significant inertial forces and subjects the piston to substantial additional loads. Under these harsh conditions, the piston may deform, experience accelerated wear, and develop additional loads and thermal stresses, while also being subjected to chemical corrosion from the combustion gases.
9
3
Share

What Causes Insufficient Power in Gas-Powered Vehicles?

Insufficient power in gas-powered vehicles may stem from issues in the fuel supply system, ignition system, or cylinder compression pressure. Below are specific reasons for the lack of power in vehicles: 1. Fuel supply system issues: Blockage in the fuel tank vent hole, fuel tank switch, fuel filter, or the fuel line between the tank and the carburetor can restrict fuel flow, leading to a lean air-fuel mixture and reduced engine performance. 2. Ignition system issues: Incorrect ignition timing or premature ignition can cause early combustion and knocking of the air-fuel mixture. Faults in the ignition system may also result in misfiring or weak sparks from the spark plugs. 3. Cylinder compression pressure: Severe wear of pistons, piston rings, or cylinders increases the clearance between these components, reducing sealing efficiency. This leads to leakage in the cylinder head and a drop in cylinder compression pressure.
7
5
Share

What are the differences between the Aumark S1 and S3?

Here are the differences between the Aumark S1 and S3: 1. Different platforms: (1) The Aumark S1 Super Light Truck is a high-end light truck developed by Foton Motor's German R&D Center in collaboration with global automotive industry leaders, specifically designed for urban intelligent and efficient logistics. (2) The Aumark S3 Super Truck is a high-end light truck product built on a new platform, integrating the smart technologies of Foton's Super Truck Global Innovation Alliance members and leading global truck technologies. 2. Different cab widths: (1) The Aumark S1 Super Light Truck has a narrower width. (2) The Aumark S3 Super Light Truck has a wider width.
7
3
Share

Does Windshield Washer Fluid Corrode Car Paint?

High-quality windshield washer fluid does not corrode car paint. However, inferior-quality windshield washer fluid can be corrosive to car paint. High-Quality Windshield Washer Fluid: High-quality windshield washer fluid is made from deionized water and various environmentally friendly additives. It has functions such as cleaning, antifreeze, antistatic, and anti-corrosion. Some superior-quality windshield washer fluids also feature rapid snow and ice melting, anti-glare, and anti-fog properties, which significantly enhance driving safety. Inferior-Quality Windshield Washer Fluid: Most inferior-quality windshield washer fluids are made by mixing water and alcohol. They not only damage the gloss of car paint and the hardness of rubber strips but can also cause color fading, swelling, or dissolution of rubber or plastic parts in severe cases. After cleaning the windshield, the fluid flows near the air conditioning intake, and the volatile fumes can enter the cabin through the vehicle's air conditioning ventilation system. The gases emitted by inferior-quality windshield washer fluids are harmful and can become invisible health hazards for car owners.
8
3
Share

Do Used Tires Have Any Value After Being Replaced?

Used tires do have value, but the price is typically at the level of scrap materials. Most auto parts markets will recycle old tires. Below is an introduction to the disposal of used tires: 1. Tire Retreading: Tire retreading technology involves refurbishing worn or otherwise damaged tires through repair processes to restore their usability. 2. Converting Waste Tires into Fuel by Adding Catalysts: This technology involves heating and pressurizing waste tires to extract fuel oil. If simple and inexpensive equipment is used, it can easily cause secondary pollution. 3. Rubber Powder and Recycled Rubber from Tires: This technology first uses equipment to crush waste tires into 20-30 mesh rubber powder, followed by a desulfurization process to soften the powder into malleable recycled rubber, which can then be reprocessed into various rubber products. If the desulfurization process is not up to standard, it can also cause pollution. 4. Rubber Powder for Waterproofing and Leak Prevention: Waterproof membranes are mainly used for building leak prevention. Nowadays, most buildings undergo waterproofing treatments, making this a widespread industry nationwide with substantial demand for waterproof membranes. Rubber powder is a key raw material in this technology, as waterproof membranes also fall under modified asphalt products.
15
0
Share

What is the fuel consumption difference between 1.5 and 2.0 engines?

The fuel consumption difference between 1.5L and 2.0L engines is approximately 2.5 liters per 100 kilometers. Here is relevant information about engine displacement: 1. Cylinder working volume: Displacement refers to exhaust volume. Cylinder working volume means the volume swept by the piston moving from top dead center to bottom dead center, also called single-cylinder displacement, which depends on cylinder bore and piston stroke. Engine displacement is the sum of all cylinders' working volumes, generally expressed in liters (L). 2. Displacement classification: Mini cars have displacement ≤1.0L; Compact cars range from 1.0-1.6L; Mid-size cars range from 1.6-2.5L; Executive cars range from 2.5-4.0L; Luxury cars have displacement >4.0L.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.