Where is the steering wheel zero position?

1 Answers
LeBrooke
07/30/25 2:00am
Steering wheel zero position is at the very top of the steering wheel. Precautions for holding the steering wheel: 1. Avoid single-handed operation: While driving, except when necessary for operation, do not operate with one hand for a long time, nor place your hand on the gearshift or window frame for extended periods. When driving on bumpy roads, hold the steering wheel firmly with both hands to prevent loss of control and potential accidents. 2. Avoid excessive force: Do not turn the steering wheel too forcefully or make sudden movements. Avoid turning the steering wheel when the vehicle is stationary. 3. Regular checks: While driving, turn the steering wheel left and right to check if it moves smoothly, if there is any lack of return force, and whether the vehicle drifts when the steering wheel is released.
Was this review help?
17
5
Share
More Forum Discussions

What Causes the Clutch Pedal of a Heavy Truck to Become Hard to Press?

This may be due to an issue with the clutch pressure plate or a stuck return spring. Below is relevant information: 1. When this situation occurs, immediate repair is necessary. Otherwise, if the clutch pedal cannot be pressed, gear shifting becomes impossible, rendering normal driving unfeasible. The clutch is a component of the vehicle's transmission system, installed between the car's engine and the gearbox. Pressing the clutch pedal disengages the clutch, while releasing it engages the clutch. 2. The clutch is mounted on the engine flywheel, with the clutch pressure plate fixed to the flywheel. Between the pressure plate and the flywheel lies the clutch friction disc. The friction disc has splines in the center that secure a drive shaft, which serves as the gearbox's power input shaft.
17
4
Share

How to turn off the 120 mph alarm on Haval M6?

Method to deactivate the 120 mph speed limit on Haval M6: To cancel the speed limit after activation, press the speed limit button again. Use the up/down buttons to locate the speed limit alarm settings, then select and disable it. The specific methods for activating and deactivating the speed limit mode on Haval M6 are as follows: 1. To activate the vehicle speed limit mode, simply press the speed limit button on the steering wheel. The speed limit value will be set to the current vehicle speed. However, if pressed during vehicle startup, the system will automatically limit the speed to 30 km/h. 2. To cancel the speed limit mode: Press the speed limit mode button again. In certain special circumstances, the vehicle's control system will also automatically deactivate the speed limit mode, such as during reverse gear or when the engine is turned off. 3. When the speed limit mode is activated, the vehicle will trigger an alarm if the speed exceeds the set limit. There are two types of alarms: one is the flashing speed limit warning light on the instrument panel, and the other is an audible alert. 4. If the speed limit mode is activated while driving and you wish to exceed the speed without triggering the alarm, fully depress the accelerator pedal to cancel the speed limit mode. However, once the vehicle speed drops below the limit, the speed limit mode will automatically reactivate.
18
4
Share

Is the DS4S an imported car?

DS4S is not an imported car. Here is some relevant information about the DS4S: 1. It is a compact car produced by Changan PSA (Peugeot Citroën), belonging to the domestic models. 2. In terms of body dimensions, the DS4S measures 4435*1843*1510 mm in length, width, and height. 3. In terms of power, the DS4S is equipped with a 1.6-liter turbocharged engine across all variants, delivering a maximum horsepower of 167 HP, a maximum power of 123 kW, and a maximum torque of 240 N·m. 4. In terms of transmission, the DS4S uses a 6-speed automatic manual transmission across all variants. 5. In terms of fuel consumption, according to the MIIT comprehensive fuel consumption data, the DS4S has a combined fuel consumption of 6.3L/100km. 6. In terms of drivetrain, the DS4S is front-engine, front-wheel drive across all variants. 7. In terms of suspension, the DS4S features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension. 8. In terms of features, the DS4S comes standard with a tire pressure monitoring system, front and rear parking radar, cruise control, driving mode switching, engine start-stop, hill-start assist, electric sunroof, smartphone connectivity, power-adjustable exterior mirrors, and rear privacy glass.
2
2
Share

Which brand does Genesis belong to?

Genesis is a brand under Hyundai, known as 'Genesis' in Chinese. The entire lineup is equipped with xenon headlights and LED front fog lights, with C-shaped LED daytime running lights integrated into the headlight assembly. Additionally, leather seats and rear seat electric heating are standard across all models. The Luxury and Flagship versions also feature four-door double-layer soundproof glass, ambient lighting, and illuminated welcome pedals, while premium decorations such as leather ceilings, solid wood, and aluminum trim are available in the two top-tier models. In terms of safety features, Genesis comes standard with nine airbags, vehicle stability control, hill-start assist, and front/rear parking sensors. The Luxury and Flagship versions further add electronic parking brakes and tire pressure monitoring systems, with the two flagship models also including adaptive cruise control, lane departure warning, automatic emergency braking, smart high-beam assist, and a panoramic camera system.
5
1
Share

What are the effects of water entering the clutch?

When water enters the clutch, it can cause the following four effects: 1. Reduced friction of the clutch disc. 2. Decreased torque transmission capability of the gearbox. 3. In severe cases, it may prevent the gears from engaging properly when shifting, directly affecting the vehicle's operation. 4. Prolonged exposure may damage the clutch's three-piece set. Solutions: After water enters the clutch, the owner can drive a short distance while pressing the clutch to evaporate the moisture. Park the vehicle, engage the handbrake with the engine off, or release the brake after turning on the lights and shift to another gear while the car is moving. Concept of the clutch: The clutch is a common component in mechanical transmissions, allowing the drivetrain to be engaged or disengaged at any time. Its basic requirements include smooth engagement, quick and thorough disengagement, ease of adjustment and repair, compact size, lightweight, good wear resistance, sufficient heat dissipation capacity, and easy operation. Common types include jaw clutches and friction clutches. The clutch is installed between the engine and the transmission and is the assembly in the drivetrain that directly connects to the engine. Function of the clutch: It allows gradual engagement between the engine and the transmission, ensuring smooth vehicle starts; temporarily disconnects the engine from the transmission to facilitate gear shifting and reduce shifting impact; and acts as a disengagement mechanism during emergency braking, preventing overload in the transmission and other drivetrain components, thus providing a certain level of protection.
11
2
Share

What brand of tires does the Arrizo 5 use?

The Arrizo 5 uses Giti brand tires, with models including 205/50/R17, 195/65R15, and 205/55R16. These tires are primarily designed for comfort. Giti offers a comprehensive range of high-quality tires catering to various vehicle types such as sedans, SUVs, off-road vehicles, racing cars, light trucks, light buses, trucks, buses, construction machinery, and agricultural machinery. Taking the 2020 Sport Edition Arrizo 5 as an example, it is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 156PS, a maximum power of 115kW, and a maximum torque of 230Nm, paired with a 5-speed manual transmission.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.