···
Log in / Register

Where is the starter of Wuling Zhiguang located?

4 Answers
LaKeira
07/30/25 2:00am
The starter motor of Wuling Zhiguang is located on the transmission. Below is relevant information about the car starter: 1. Overview: The starter can convert the electrical energy from the battery into mechanical energy, driving the engine flywheel to rotate and achieve engine starting. Before the engine can operate on its own power, it must rely on external force to rotate. The process of the engine transitioning from a stationary state to self-operation with the help of external force is called engine starting. 2. Working principle: The starter uses three components to achieve the entire starting process. The DC motor introduces current from the battery and causes the starter's drive gear to produce mechanical movement; the transmission mechanism engages the drive gear into the flywheel ring gear and can automatically disengage after the engine starts; the switching of the starter circuit is controlled by an electromagnetic switch.
Was this review help?
4
0
Share
DeSilas
08/15/25 7:57am
I remember when I used the Wuling之光 for hauling, I always had to bend over and peek under the hood to check the starter position—usually located beneath the engine, near the cabin side, at the bottom of the engine compartment close to the rear drive axle. It tends to accumulate dust and rust, so whenever the clicking sound during startup seemed off, I’d first use a multimeter to check the battery voltage to avoid minor issues turning into major failures. The starter’s tucked away pretty deep, definitely tricky for beginners—my advice is to park in neutral, turn on the engine bay light, and search carefully without yanking the wiring harness. If all else fails, just let the repair shop handle it to save trouble. Regular maintenance extends its lifespan; my old-school wisdom is frequent checks and cleaning for smooth starts.
Was this review help?
3
4
Share
Expand All
LaAlivia
10/21/25 3:45am
As a new owner of the Wuling Zhiguang, I was completely lost when the engine failed for the first time. The mechanic pointed under the engine and said the starter was there, located at the rear or bottom side of the engine, connected to the battery cables. Later, I figured it out myself and found that although the position is a bit out of the way, the working space is manageable. For example, when cleaning, you have to squat down and use a small brush to remove dust. If you're not familiar with the location, don't mess around—check the vehicle manual or short video tutorials for safer guidance. In daily driving, unusual noises during startup are a warning sign. I always keep a set of tools handy for simple checks. If the car won't start, the first things to check are the fuses and connectors.
Was this review help?
18
4
Share
Expand All
McSpencer
12/04/25 4:13am
In terms of vehicle maintenance, the Wuling Zhiguang starter is mostly installed at the bottom of the engine, close to the cockpit. The rear-engine design positions it near the rear axle. During inspection, first disconnect the negative terminal of the battery to avoid short-circuit hazards. The key location is at the power transmission point, where carbon deposits or corrosion can cause starting difficulties. Regular application of anti-rust spray can prevent this. A simple positioning method: open the hood and look down at the metal casing below.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

What are the reasons for the soft brake feeling in the Sagitar that makes it seem like it can't stop?

The brake, as a critical component of safe driving, should be given special attention by every driver. Before each drive, you can test the working condition of the brake pedal. Before starting the engine, the brake pedal will be very hard; after the engine is normally started, the brake pedal will sink slightly. The reasons for a soft brake feeling include the following: 1. Mixed brake fluid: Using different brands of brake fluid together can reduce braking performance. 2. Air in the brake fluid: The presence of air in the brake fluid that has not been bled out. 3. Oil leakage or poor sealing: Oil leakage in the master cylinder or wheel cylinders, or poor sealing. 4. Damaged outer packaging: Damage to the external casing of the brake lines.
6
3
Share

What is the difference between GL8 652 and 653?

The differences between GL8 652 and 653 are: 1. Different fuel tank capacity: GL8 652 has a fuel tank capacity of 66L; GL8 653 has a fuel tank capacity of 70L. 2. Different trunk volume: GL8 652 has a trunk volume of 475 to 1605L; GL8 653 has a trunk volume of 521 to 1650L. 3. Different dimensions: GL8 652 measures 5238mm in length, 1878mm in width, and 1776mm in height, with a wheelbase of 3088mm; GL8 653 measures 5219mm in length, 1878mm in width, and 1799mm in height, with a wheelbase of 3088mm.
10
0
Share

Will you fail immediately if you don't use the turn signal in Subject 3?

It results in point deduction. Below are the relevant details about Subject 3: 1. Point deduction: Failing to use or incorrectly using the turn signal before starting, turning, changing lanes, overtaking, or parking will result in a 10-point deduction. 2. Full score: The full score for the Subject 3 road driving skills and safe civilized driving knowledge test is 100 points each, and a score of 90 or above is considered passing. 3. Evaluation method: The Subject 3 intelligent examination system adopts a combination of automatic and manual evaluation to assess 16 basic test items, including preparation before getting in the car, starting, driving straight, changing lanes, passing intersections, passing crosswalks, school zones, passing bus stops, meeting oncoming vehicles, overtaking, pulling over, making U-turns, and night driving.
5
0
Share

What does GL825s mean?

GL825s refers to the Buick GL8 model equipped with a 2.5T naturally aspirated engine. Here are the specific details about the Buick GL8: 1. Vehicle Positioning: The Buick GL8 is a mid-to-high-end MPV launched by SAIC-GM Buick. 2. Powertrain: This vehicle is equipped with a 2.0T SIDI direct-injection turbocharged engine, which delivers a maximum power of 191 kW and a maximum torque of 350 Nm. In terms of the transmission system, the engine is paired with a 6-speed automatic manual transmission. During operation, the engine can output its maximum power at 5400 rpm and its maximum torque between 2000-5000 rpm.
18
4
Share

Where is the air conditioning filter of Dongfeng Fengxing S500 located?

The air conditioning filter of Dongfeng Fengxing S500 is located inside the glove box in front of the passenger seat. The replacement method is as follows: 1. Open the glove box on the passenger side; 2. Press the buckle on the right side of the glove box; 3. Remove the glove box and the cover of the air conditioning filter; 4. Pull out the old air conditioning filter for replacement. The Dongfeng Fengxing S500 is an MPV with the following body dimensions: length 4620mm, width 1810mm, height 1720mm, wheelbase 2750mm, and a fuel tank capacity of 45L. It is equipped with a 1.5L naturally aspirated engine, with a maximum power of 88kW and a maximum power speed of 6000rpm.
3
3
Share

What to Do When Car Headlight Covers Turn Yellow?

Methods for dealing with yellowed car headlight covers: 1. Wipe with a soft cloth: Whether cleaning the car or the headlight covers, always use a soft cloth to avoid scratching the paint or the covers. 2. Regular cleaning: You can gently wipe the covers with soapy water or cleaning wax using a soft cloth to remove stains. Soapy water is mild and non-corrosive, so it won’t harm the headlights. Alternatively, using a professional car cleaner is even better, as it not only removes dirt but also makes the headlights less prone to dust accumulation. 3. Polish and maintain: First, apply a polishing compound, then use a soft cloth to apply protective wax (car wax). This will not only enhance the gloss and brightness of the headlights but also protect the car’s paint.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.