Where is the start button of Volvo XC60?

2 Answers
Cardoso
07/24/25 7:59pm
Volvo XC60's start button is located on the right side of the steering wheel. First, press the vehicle's brake pedal, otherwise the vehicle cannot be started. Then, press the one-touch start button to start the vehicle's engine. After the vehicle is started, shift the gear to D and release the electronic parking brake to drive normally. Volvo XC60 is a mid-size SUV launched by Volvo Asia Pacific, with a length, width, and height of 4688mm, 1902mm, and 1658mm respectively, and a wheelbase of 2865mm. It is equipped with a 2.0T turbocharged engine with a maximum power of 140kw, matched with an 8-speed automatic transmission.
Was this review help?
4
5
Share
KaiDella
08/11/25 10:57am
The start button of the Volvo XC60 is located on the center console to the right of the steering wheel. The position is ergonomically designed – I found it super easy to locate the moment I drove this car. It sits right next to the gearshift lever; just press it gently to start the engine. This is part of the keyless start system. Remember to press the brake pedal first when operating it, otherwise the car might ignore you. Personally, I love this design as it eliminates the hassle of inserting a key – the car can detect the key as long as it’s inside the vehicle. For new owners who aren’t familiar with it, just check if the dashboard indicator lights up, which means the system is ready. Additionally, after starting, listen to whether the engine sound is smooth – this is also a small safety tip. Overall, the placement of the XC60’s start button is quite user-friendly compared to similar cars. I’ve never accidentally pressed it even when driving on highways, and over time, you’ll grow to love this minimalist feel.
Was this review help?
14
1
Share
Expand All
More Forum Discussions

Why does the Honda 5AT transmission make abnormal noise at idle?

Honda 5AT transmission idle noise is caused by long-term failure to change the oil or using inferior oil. Long-term failure to change the oil: Not changing the oil for a long time will cause the transmission oil to become thicker and insufficient in fluidity, resulting in direct friction between components without a protective layer, thereby exacerbating the wear of mechanical parts inside the transmission and causing abnormal noise. Using inferior oil: Because inferior oil has poor temperature resistance and is prone to oxidation reactions, forming sludge and oil residue, which can clog the filter screen and oil passages, increasing friction between internal components of the automatic transmission, leading to abnormal noise when the vehicle starts.
12
0
Share

What is the appropriate tire pressure for the Tayron 330?

The normal tire pressure range for the Tayron 330 is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard. The tire pressure monitoring for the Tayron 330 can be viewed on the dashboard, displayed on the central screen. When the tire pressure monitoring system detects low tire pressure, the display will show a warning icon and message, allowing you to identify which tire is underinflated through the tire pressure warning view. The tire pressure monitoring system is a type of active safety device that alerts the driver in time when there are signs of danger in the tires, prompting them to take appropriate measures to avoid serious accidents. Generally, tire pressure above 2.8 bar is considered too high, and tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread of the tire, shortening its lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; reduces the functionality of the cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the tire bead and causing abnormal wear; multiplies friction between the tire and the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no seal on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible causes: Abnormal tire pressure: Typically, it will alert if the pressure is below 1.8 bar or above 3.0 bar. In this case, a tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure monitoring is not reset in time, the system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the tire valve, monitors tire pressure. If the sensor is damaged due to impact while driving, the tire pressure warning light may also illuminate. For sensor damage, the only solution is to replace it with a new one.
14
3
Share

Which brands has Mercedes-Benz acquired?

Mercedes-Benz has acquired brands such as Maybach, AMG, Mercedes-Benz, SMART, and Dodge. The following is an introduction to the Mercedes-Benz brand: Brand Introduction: Mercedes-Benz is a world-class luxury automobile brand, considered one of the most prestigious car brands globally. It is renowned for its perfect technical level, high-quality standards, innovative capabilities, and a series of classic coupe models. Internationally, the brand is commonly referred to as Mercedes, while in mainland China, it is known as "Benz" (hence the term Mercedes-Benz). In Taiwan, it is translated as "Benz," and in Hong Kong, it is referred to as "Ping Zhi."
2
4
Share

Can A3 be upgraded to A1?

Yes, as long as you already hold an A3, B1, or B2 driver's license and meet certain conditions, you can upgrade to an A1 license. Below are the relevant details: Conditions to meet: You must have held a city bus or medium-sized passenger vehicle driving qualification for over five years, a large truck driving qualification for over three years, and a tractor driving qualification for over two years. Restrictions: You cannot upgrade if you have been involved in a fatal traffic accident where you bore equal or greater responsibility, if you have driven under the influence of alcohol, or if your driver's license has been revoked or suspended within the past ten years.
1
5
Share

How Many Days Does It Take to Paint a Car Bumper?

Bumper painting generally takes about an hour, and quick painting can save time. For a brand-new unpainted bumper, the process from painting, baking or air-drying, to final polishing can take one day at the fastest, or up to two days for slower processes. Below is an introduction to car bumpers: Safety Function: Bumpers serve purposes such as safety protection, vehicle decoration, and improving the vehicle's aerodynamic characteristics. From a safety perspective, they act as a buffer during low-speed collisions, protecting the front and rear body of the car. Decorative Function: Visually, bumpers are decorative and serve as an important component in styling the car's exterior. Additionally, car bumpers also have certain aerodynamic effects.
1
1
Share

Where is the fuel filler cap button on the Lynk & Co 03?

The Lynk & Co 03 does not have a fuel filler cap button. This vehicle features an externally-opening fuel tank cap design, meaning there is no interior switch button. To open it, you must first unlock the vehicle, then simply press the fuel tank cap to release it. The cap mechanism contains a spring-loaded locking system that prevents opening when the car is locked. The Lynk & Co 03 is built on the CMA platform jointly developed by Geely and Volvo. It comes equipped with either a 1.5T three-cylinder or 2.0T four-cylinder engine. The vehicle dimensions are 4658mm (length) × 1840mm (width) × 1459mm (height), with a wheelbase of 2730mm.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.