Where is the start button of Audi Q5?

3 Answers
LaDerek
07/29/25 6:34am
The start button of Audi Q5 is located below the central air conditioning panel in front of the gear shift lever, which is a round button with the word START on it. Audi Q5 is a medium-sized SUV with an exterior body size of 4629mm in length, 1898mm in width, and 1655mm in height, and a wheelbase of 2908mm. The Audi Q5 is equipped with a 2.0T turbocharged engine and a 7-speed dual-clutch transmission, with a maximum power of 140 kilowatts and a maximum torque of 320 Newton meters. The front track is 1616mm, the rear track is 1610mm, the luggage compartment volume is 550 liters, the driving method is front four-wheel drive, and the front and rear suspension types both use five-link independent suspension.
Was this review help?
17
0
Share
StHadley
08/12/25 10:18pm
I've been driving an Audi Q5 for several years, and the start button is located on the right side of the steering wheel, in that recess on the center console. You can see it as soon as you get in the car, right next to the gear shift. Press the brake pedal and give the button a light press to start the engine, but the key must be inside the car for it to respond. If you can't find the button, check below the center console panel or refer to the manual—there are icon indicators. If the key battery is dead and it doesn't work, you can use the back of the key to touch the button for an emergency start. The system is designed intelligently to prevent accidental operations, and once started, the engine runs smoothly, eliminating the hassle of searching for a keyhole—it's quite suitable for city driving. During routine maintenance, check the button's condition to ensure good contact and prolong its lifespan.
Was this review help?
15
0
Share
Expand All
MacTanner
10/04/25 3:42am
As a mechanic who frequently services Audi vehicles, the start button for the Audi Q5 is typically located in the lower section of the center console, on the right side of the steering wheel, making it intuitive and easy to find. The operation is straightforward: ensure the vehicle is in Park (P), firmly press the brake pedal, and then press the button with your finger to start the engine. A key point is that the key must be within the effective range inside the car; otherwise, signal transmission will fail, preventing the engine from starting. If the button malfunctions, check if the key battery is low—replace it with a new one and restart the system. Always confirm the surroundings are safe before starting, and avoid releasing the brake on slopes. Regularly clean dust around the button to maintain stable functionality and prevent malfunctions.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

What is the fuel consumption of the Changan CS85?

The actual fuel consumption of the Changan CS85 2.0T model is 10.5L per 100 kilometers, while the 1.5T version consumes 9.1L per 100 kilometers. The following factors affect the fuel consumption of the Changan CS85: 1. Vehicle weight: The weight of the car affects fuel consumption—the heavier the car, the higher the fuel consumption. The Changan CS85 2.0T is significantly heavier than the 1.5T model, resulting in higher fuel consumption. To reduce fuel consumption, try to avoid carrying unnecessary heavy items in the car. 2. External environment: Road conditions impact fuel consumption. Generally, smooth roads consume less fuel than bumpy roads, straight roads are more fuel-efficient than winding ones, and traffic-free roads are better than congested ones. In summer, hot weather increases fuel consumption due to air conditioning use. In winter, low temperatures prevent gasoline from reaching optimal combustion efficiency, leading to incomplete combustion and higher fuel consumption. 3. Vehicle maintenance: Regularly check and adjust tire pressure. Low tire pressure increases the contact area between the tires and the road, raising driving resistance and fuel consumption. Additionally, dirt and grease on the engine surface can hinder heat dissipation, increasing fuel consumption. Proper maintenance is a key method to reduce fuel consumption. Regular inspections and servicing not only lower fuel consumption but also extend the vehicle's lifespan and prevent unexpected issues.
14
5
Share

What is Keyless Start?

Keyless start refers to the ability to start a vehicle without physically turning a key. Simply keep the key in your bag or pocket, press a button inside the car or turn the ignition knob, and the engine will start. This feature offers greater convenience and enhances the sense of luxury and technology. The system utilizes advanced Radio Frequency Identification (RFID) technology, automatically unlocking the doors via the chip in the smart card carried by the owner. Below are the benefits of keyless start: 1. Automatic door locking: Once you start the vehicle and press the brake pedal for the first time, all four doors will automatically lock. This prevents incidents like bag snatching during city traffic jams or late-night drives, ensuring complete safety. 2. Owner recognition: The vehicle can identify the genuine owner when entering. If the owner is not inside, the vehicle will not start and will immediately trigger an alarm. 3. Full-vehicle anti-theft: By locking the circuit, fuel system, and ignition point, the vehicle remains immobilized even if the anti-theft device is illegally removed. 4. No false alarms: The product employs advanced anti-collision technology, significantly improving system reliability.
3
5
Share

Where are Renault engines produced?

Renault engines are imported and manufactured by Nissan. Renault S.A. is a French vehicle manufacturer that produces various types of vehicles, including racing cars, compact cars, mid-size cars, SUVs, and large vehicles (including trucks, construction vehicles, and buses). Additional relevant information is as follows: 1. An engine (or motor) is a machine that converts other forms of energy into mechanical energy, including internal combustion engines (such as gasoline engines), external combustion engines (such as Stirling engines and steam engines), and electric motors. Internal combustion engines typically convert chemical energy into mechanical energy. The term 'engine' can refer to both the power-generating device and the entire machine, including the power unit. The engine was first developed in the UK, so the concept of the engine originates from English, with its original meaning referring to a 'mechanical device that generates power.' 2. The Renault company is named after its founder, Louis Renault. The logo consists of four diamonds arranged in a pattern, symbolizing the integration of the three Renault brothers with the automotive industry, representing Renault's ability to compete, survive, and develop in infinite (four-dimensional) space.
19
0
Share

What Are the Reasons for Difficulty in Shifting Gears in a Manual Transmission Car?

The reasons for difficulty in shifting gears in a manual transmission car are as follows: 1. It may be caused by wear and tear of the gears inside the transmission. 2. It may be due to damage to the synchronizer inside the transmission. 3. It could be because of damage to the internal first gear of the gear lever assembly. 4. There might be a malfunction in the gear shifting mechanism of the manual transmission. 5. It could be due to a failure in the clutch system's three-piece set, including worn-out release bearings, clutch plates worn to their limit, or damaged pressure plates. Relevant information about the transmission is as follows: 1. A manual transmission, also known as a mechanical gearbox, requires manually moving the gear lever (commonly known as the 'gear stick') to change the gear engagement positions inside the transmission, altering the gear ratio to achieve the purpose of shifting gears. 2. The physical characteristics of the engine determine the necessity of a transmission. Firstly, any engine has its peak RPM; secondly, the engine's maximum power and maximum torque occur within a certain RPM range.
4
0
Share

Which button is the rearview mirror heating switch for the Mercedes-Benz C200?

The rearview mirror heating switch for the Mercedes-Benz C200 is the REAR button, located on the center console. The rearview mirror heating button is integrated with the rear window defogger into a single button, marked with a rectangle featuring three upward-curving arrows and the REAR symbol. Press the corresponding button when needed to activate the heating function. The rearview mirror heating is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the mirror surface, gradually removing rain or fog from the mirror, eliminating the need for the driver to frequently wipe the mirror manually, thereby reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric mirror adjustment function button—simply rotate the knob to turn it on. The other is located on the air conditioning control panel—press the heating button to activate it. There's no need to manually adjust the angle, as the driver's side has adjustment buttons. Principle of the rearview mirror heating function: After rotating the button, the electric heater behind the rearview mirror glass quickly heats up to a fixed temperature within a few minutes, typically between 35-60 degrees Celsius. The heat will radiate from the left and right rearview mirrors. Meanwhile, as the temperature rises and evaporates, water droplets on the mirror surface will become smaller, and fog will gradually disappear, thereby heating the mirror and removing frost. If the rain is particularly heavy, its effect may diminish, becoming less noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves adding electric heating wires to the mirror. These wires consume a significant amount of electricity. When using the rearview mirror heating function, ensure the car is in a running state. Avoid activating the heating function while the car is stationary to prevent draining the car battery, which could leave insufficient power to start the car. Other methods for defogging rearview mirrors include: Opening windows for air circulation: Crack open the side windows slightly to allow air to flow between the inside and outside of the car, reducing the temperature difference and causing the fog to gradually disappear. Adjusting the air conditioning: Set the car's air conditioning to the appropriate setting to use the warm air blown out by the AC to defog the mirrors.
1
1
Share

How to Remove the Steering Wheel of a Volkswagen Passat?

Volkswagen Passat steering wheel removal method is as follows: 1. First, disconnect the negative terminal of the battery, then remove the combination switch cover. 2. There are two small holes on the back of the steering wheel. Insert a thin screwdriver into each of these holes and push the retaining spring towards the center of the steering wheel to remove it. It is important to note that the steering wheel should not be forcibly removed, as this may cause noise when reinstalling. 3. The steering wheel not only controls the direction of the vehicle but can also help identify faults. Paying attention to it while driving is beneficial for both safety and the vehicle. Generally, the most comfortable way to hold the steering wheel is with both hands parallel to each other.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.