Where is the start button located on the Audi Q5?

2 Answers
FinnLynn
08/30/25 6:32am
The start button of the Audi Q5 is located in front of the gear shift lever, below the central air conditioning panel. Here is more information about the Audi Q5: 1. Its body structure is a 5-door, 5-seat SUV, with body dimensions of 4629mm in length, 1898mm in width, 1655mm in height, a wheelbase of 2807mm, a fuel tank capacity of 75 liters, and a curb weight of 1900kg. 2. The Audi Q5 features a five-link independent front suspension and a trapezoidal link independent rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 230 PS, a maximum power of 169 kW, and a maximum torque of 350 Nm, paired with an 8-speed automatic transmission.
Was this review help?
15
2
Share
NoraRose
09/12/25 3:36am
I've driven quite a few Audi Q5 models, and the placement of the start button is quite thoughtful. It's typically located in the center console area on the right side of the steering wheel, near the gear shift or in front of the cup holders. To be more specific, once you're seated in the driver's seat, you can easily reach a small circular button with your right hand, which likely features an engine icon – just press it to start. Audi designed it this way to make it more convenient for drivers to operate, ensuring quicker and smoother engine starts. However, if it doesn't start, remember to check if the key is within the car's detection range. If the key's battery is dead, the button won't work either, in which case try replacing the battery. The one-touch start system also helps avoid the awkwardness of forgetting to turn off the engine, which is quite user-friendly. The position rarely changes, though there might be slight variations between different model years, but overall it's very intuitive and reliable.
Was this review help?
17
3
Share
Expand All
More Forum Discussions

What to Do If the Annual Inspection Sticker Is Lost?

If the annual inspection sticker is lost, it should be promptly reissued. The process for reissuing a lost annual inspection sticker is as follows: 1. Bring your ID card and vehicle license to the vehicle management office at the vehicle's registration location and fill out the application form for reissuing the annual inspection sticker. 2. Submit the documents and application form to the staff. 3. The vehicle management office will review the materials. If they meet the requirements, the relevant materials will be stored, information will be recorded, and the vehicle inspection compliance sticker will be issued. Annual inspection refers to a mandatory test for every vehicle that has obtained an official license plate and vehicle license, equivalent to an annual physical examination for the vehicle according to the safety technical conditions for motor vehicle operation. Annual inspections can promptly eliminate potential vehicle safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents.
8
1
Share

What is the battery model number for the Buick Regal?

The battery model used in the Buick Regal is L2400, which is a fully sealed, maintenance-free battery with a long service life, excellent performance, and high safety and reliability, ensuring smooth travel every time. Here is more information about the Buick Regal: 1. The Buick Regal is a B-class sedan launched by Buick, with dimensions of 4913mm in length, 1863mm in width, and 1462mm in height, and a wheelbase of 2829mm. 2. In terms of exterior design, the car features a waterfall-style front grille, with a metallic three-shield emblem embedded in the center. The three-dimensional combination headlights on both sides complement each other, along with 7-shaped LED daytime running lights, which are more visible in low-light conditions compared to standard daytime running lights. A central line on the engine hood starts from the grille and ends at the base of the windshield, echoing the teardrop-shaped side mirrors on both sides of the car.
15
4
Share

Under What Circumstances Should High Beams Be Used?

Generally, high beams should be used when driving on roads with poor lighting conditions, such as highways. However, when encountering other vehicles, drivers should switch to low beams and then revert to high beams afterward. Additional information on the use of high beams is as follows: 1. If high beams are used improperly at night, they can interfere with the visibility of surrounding vehicles and create safety hazards. According to national laws, low beams should be used when driving on roads without central barriers or when meeting non-motorized vehicles on narrow roads. 2. High beams should not be used at intersections controlled by traffic signals. Due to their intense light, high beams can cause temporary glare, making them generally prohibited in urban areas. When overtaking at night, drivers should alternate between high and low beams to alert the vehicle ahead.
9
0
Share

Why Does the Car Body Shake on the Highway?

Here are the reasons why the car body shakes on the highway: 1. Excessive carbon deposits. If there is severe carbon buildup inside the engine cylinders, it can lead to clogged spark plugs and valves, directly causing the car to shake at idle. If the car's acceleration performance has significantly declined and the shaking persists, consider cleaning the engine cylinders. 2. Fuel system failure. Unstable fuel pressure can cause fluctuations in the air-fuel mixture concentration, not only resulting in shaking but also unstable idling. First, consider replacing the fuel filter and then check the fuel pressure. If abnormal, the issue might be with the fuel pump. 3. Worn engine mounts. If the engine shaking becomes increasingly severe but the power output remains unaffected, the problem could lie with the engine mounts. 4. Misfiring is the most common cause of engine shaking. The issue may stem from faulty ignition coils or spark plugs. If the ignition coil malfunctions or the spark plug fails to fire for any reason, the car will experience shaking.
12
3
Share

What is Maxxis MI tire?

Maxxis MI is a tire brand under Cheng Shin Rubber Industry Co., Ltd., a Taiwanese company established in 1967. More information about Maxxis tires is as follows: 1. Maxxis tires have always been fully dedicated to the automotive tire industry, sparing no effort in researching and creating products that continuously exceed customer expectations. With meticulous and down-to-earth enthusiasm, Maxxis tires are writing their own legend and myth. Over the years, Maxxis tires have received numerous awards and recognitions from international, national, local, and professional organizations. 2. Maxxis tires have a sales network covering more than 140 countries and regions worldwide, with over 5,000 sales channels. They also have sales and operational branches on every continent, maintaining close contact with customers, tracking their needs at all times to ensure maximum customer satisfaction. 3. Maxxis tires provide substantial policy support to their sales channels every year and invest significant manpower and resources in updating and maintaining the image of these channels. It is these grassroots sales outlets, present in people's daily lives, that bring the Maxxis brand into people's lives, making it an indispensable part of their daily routine. It is also through this word-of-mouth, the oldest and most credible form of information dissemination, that Maxxis has gained the trust of more and more consumers.
8
1
Share

How long before the driver's license expires can it be renewed?

You can apply for a renewal at the vehicle management office where the driver's license was issued or at any other vehicle management office within 90 days before the expiration of the motor vehicle driver's license. The following documents are required for renewing a driver's license: 1. The identity proof of the motor vehicle driver. 2. The motor vehicle driver's license. 3. A medical certificate issued by a county-level or higher medical institution or a military medical institution at or above the regiment level. For those applying for a special small automatic passenger vehicle for the disabled, a medical certificate issued by a specialized medical institution designated by the provincial health authority must be submitted.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.