···
Log in / Register

Where is the start button for Audi A4?

1 Answers
MacLillian
08/28/25 4:36am

The start button for the Audi A4 is located on the right side of the car's control lever. Press it to start the engine. Taking the 2021 Audi A4 Fashion Elegance model as an example, it is a mid-size car with body dimensions of 4762 mm in length, 1847 mm in width, and 1436 mm in height, a wheelbase of 2825 mm, and a fuel tank capacity of 54 liters. The 2021 Audi A4 Fashion Elegance model is equipped with a 2.0-liter turbocharged engine, delivering a maximum power of 150 kW and a maximum torque of 320 Nm, paired with a 7-speed dual-clutch transmission. It adopts a front-wheel-drive layout, with both front and rear suspensions using a five-link independent suspension system.

Was this review help?
19
0
Share
More Forum Discussions

Can I Lend My Car to Others to Drive?

It is best not to lend your car to others. Here is more information about lending a car: 1. Reasons: If you lend your car to someone without a driver's license and they are caught by traffic police, you may face fines and have your motor vehicle driver's license revoked. Even if you lend it to someone with a valid license, you should still be cautious, as you may bear corresponding liability in case of a traffic accident. 2. Exemption Conditions: The borrower must have a legal driving qualification: The 'Tort Liability Law of the People's Republic of China' clearly states that if an accident occurs after lending the car to someone else, the losses shall be borne by the insurance company and the driver, provided the owner is not at fault and thus not liable for compensation. For the owner to be exempt, the following three conditions must be met: the borrower has a valid driver's license that has not been revoked or expired; the driving record matches the type of vehicle being driven; and the borrower was not engaged in any legally prohibited behaviors such as drunk driving or drug driving at the time of borrowing the car.
2
5
Share

Does the Corolla have ISOFIX hard connectors?

The Corolla has ISOFIX connectors for child safety seats, and it is recommended to prioritize safety seats with ISOFIX connectors. When purchasing a child safety seat, choose one that matches the corresponding connectors. It is best to use fixed points for installation and securement, and it is not recommended to use seat belts for fixing. Additional information: 1. The advantage of ISOFIX is that it is particularly easy to install, with a very low error rate during installation, and a relatively high safety coefficient; 2. The disadvantage is that it is more expensive, and the prerequisite is that your car must have two ISOFIX connectors. Simply put, ISOFIX connectors are two fixed connectors at the base of the car seat that can directly connect to a child safety seat.
1
1
Share

When to Use High Beam and Low Beam Headlights?

High beam and low beam headlights are used in the following situations: 1. High beam: High beam headlights are generally suitable for driving at night on roads without streetlights or with poor lighting, such as on poorly lit national highways or expressways. When the vehicle speed is below 30 km/h, low beam should be used, while when the speed exceeds 30 km/h, high beam can be used to illuminate up to 150 meters ahead, ensuring driving safety. 2. Low beam: When an oncoming vehicle is within 150 meters, the high beam should be switched to low beam to avoid obstructing the oncoming driver's vision. If the other driver does not switch to low beam, immediately reduce speed and repeatedly alternate between high and low beams as a signal. If the other driver still does not switch, slow down and pull over to the right to yield, avoiding any aggressive use of high beams that could impair both drivers' vision and lead to an accident.
2
0
Share

Can Android Phones Use CarPlay?

Android phones cannot use CarPlay. Below are some differences between CarLife and CarPlay: 1. Developer: CarLife is China's first cross-platform car-phone connectivity system launched by Baidu's Internet of Vehicles, while CarPlay is a car-phone connectivity system released by Apple Inc. in the United States. 2. Compatibility: The CarLife vehicle terminal is compatible with Android, Linux, and QNX, while the user terminal supports both Android and Apple iOS operating systems, covering over 95% of smartphones. In contrast, CarPlay only supports iPhone. 3. Features: CarLife supports a wide range of third-party applications, whereas CarPlay began supporting third-party navigation on June 5, 2018.
5
2
Share

Where is the Car's Evaporator Located?

The evaporator of a car's air conditioning system is generally installed beneath the dashboard. Here is some information about the air conditioning system: 1. Definition: A car's air conditioning refers to the air conditioning device installed in a vehicle, which can cool, heat, ventilate, and purify the air inside the cabin, providing a comfortable environment for passengers, reducing driver fatigue, and enhancing driving safety. The air conditioning system has become one of the indicators of a car's comprehensive functionality. 2. Classification: Based on the driving method, it can be divided into: Independent type (uses a dedicated engine to drive the compressor, with large cooling capacity and stable operation, but high cost, large size and weight, mostly used in large and medium-sized buses) and Non-independent type (the air conditioning compressor is driven by the car's engine, with cooling performance significantly affected by the engine's operation, poor stability, mostly used in small buses and cars).
18
2
Share

What to Do If Reverse Gear Won't Stay Engaged?

Car reverse gear won't stay engaged mainly due to low vehicle temperature, incomplete lubrication of transmission oil, mismatch between vehicle speed and gear position, or lack of synchronizer between first gear and reverse gear. The main solutions are as follows: 1. Attempt to engage reverse gear when the vehicle is stationary: If the transmission makes a "clicking" gear collision sound during the process of engaging reverse gear, it indicates that the vehicle's clutch is not fully disengaged. After repairing the clutch, the fault can be eliminated. 2. Adjustment and repair: Go to a specialized repair shop to adjust the gear position and replace the transmission oil, and the fault can also be eliminated. For manual transmissions, when shifting at low speeds, the clutch must be able to fully disengage in order to smoothly engage the corresponding gear.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.