···
Log in / Register

Where is the stamped chassis number of MG GS?

4 Answers
StAdaline
07/24/25 5:31am
Here are the locations of the stamped chassis number for the MG GS: 1. The chassis number of the MG GS is located under the front passenger seat. Pull up the floor mat, and you will find a long slit. Open this slit to see the number. 2. The chassis number can also be found at the lower right corner of the front windshield, just below the wiper. After opening the engine hood, there is a metal plate on the left side panel. The VIN code on the vehicle registration document is the chassis number. Additional information: As a compact SUV, the MG GS has a relatively regular trunk space. The standard depth ranges from 870 to 1780mm, the width is 1020mm, and the height is 700mm.
Was this review help?
8
1
Share
SanTaylor
08/10/25 11:34pm
I've been driving my MG GS for several years, and I remember the location of the stamped chassis number quite clearly. It's usually on the frame behind the front wheel, near the firewall of the engine compartment. You have to squat down to see it or wipe the metal surface clean with your hand to make it visible. That's where the full 17-digit Vehicle Identification Number (VIN) is engraved, designed to be tamper-proof and theft-resistant. I've also noticed that for some model years, the location might be slightly different—for example, near the label under the B-pillar with a stamped version, or under the spare tire well in the middle of the chassis. I recommend using a small flashlight when searching, and be extra careful in poorly lit areas to avoid injuring your hands. This is the hardcore proof of the vehicle's identity, essential for registration and insurance, so make sure to record it correctly without mistakes.
Was this review help?
19
2
Share
Expand All
Vera
09/24/25 6:49am
To locate the stamped VIN (Vehicle Identification Number) for the MG GS, check these key locations: The most common spot is under the dashboard at the lower left corner of the windshield, easily visible at a glance. If not found there, open the hood and inspect the firewall area, specifically the panel near the rear of the engine, where clear numbers are often stamped. The label on the inner side of the passenger door is typically printed; the actual stamped VIN is usually on the metal frame, such as near the front wheel rear suspension mount. It's recommended to search slowly after parking and turning off the engine—using a cloth to wipe away dust can make identification easier. The VIN is crucial for vehicle legality and maintenance records, so regularly checking its condition helps avoid future hassles.
Was this review help?
12
1
Share
Expand All
LaConnor
11/08/25 2:13am
The stamped VIN on the MG GS is designed at key points of the vehicle frame. Typical locations include the lower edge of the windshield, below the B-pillar, or on the firewall metal components. The engraved VIN serves anti-counterfeiting and anti-theft purposes, offering greater durability than printed labels. Sometimes, engravings can also be felt around the spare tire well. This is the core identification of the vehicle; ensure a safe environment when inspecting it.
Was this review help?
20
4
Share
Expand All
More Forum Discussions

What are the methods to prevent car tire blowouts?

Methods to prevent car tire blowouts are: 1. Regularly clean stones from tire treads; 2. Reduce tire exposure to direct sunlight; 3. Frequently check tire pressure; 4. Pay attention to suspension maintenance; 5. Regularly inspect front wheel alignment; 6. Be mindful of driving habits, choose road surfaces carefully while driving, avoid objects that can puncture or scratch tires, and steer clear of chemical spills that may corrode tires. The functions of tires are: 1. Support the entire weight of the vehicle and bear the car's load; 2. Transmit traction and braking torque, ensuring adhesion between wheels and the road; 3. Reduce and absorb vibrations and impact forces during driving, preventing severe vibrations and premature damage to car components; 4. Adapt to high-speed performance requirements while reducing driving noise, ensuring safety, handling stability, comfort, and fuel efficiency.
14
2
Share

How to Solve the Oil Burning Issue in Haval H6?

Haval H6 oil burning can be resolved by replacing valve stem seals, cylinder liners, or repairing the engine. The oil burning issue can be diagnosed through the following methods: 1. Cold-start oil burning: When starting the car for the first time each day, thick blue smoke may be emitted from the exhaust pipe. The blue smoke usually disappears after a while and does not recur for the rest of the day. 2. Oil burning during acceleration: When the driver accelerates sharply while driving or revs the engine while stationary, large amounts of blue smoke are emitted from the exhaust pipe. 3. For vehicles suspected of oil burning, fill the engine with oil and have the owner drive 1,000 kilometers before returning to the service station to weigh the oil and filter. Then refill the oil and repeat the 1,000-kilometer drive. Repeat this process three times to obtain an average value. After the break-in period, normal oil consumption is generally around 0.3 liters per 1,000 kilometers. If the consumption exceeds this level, it indicates an oil burning issue.
5
0
Share

Is the Lamando GTS four-wheel drive?

Lamando GTS is not a four-wheel drive vehicle; it is a front-wheel drive car. Here is some information about the Lamando GTS: 1. The Lamando GTS is a high-performance compact coupe under the Volkswagen brand. The car measures 4610 mm in length, 1826 mm in width, and 1425 mm in height, with a wheelbase of 2656 mm. 2. The Lamando GTS is equipped with a 2.0-liter turbocharged engine, delivering 220 horsepower and a maximum torque of 350 Nm. This engine can output maximum power at 4500 to 6200 rpm and maximum torque at 1500 to 4400 rpm. 3. The engine features hybrid injection technology and uses an aluminum cylinder head with an iron cylinder block. It is paired with a 7-speed dual-clutch transmission, which offers fast gear shifting and high transmission efficiency.
5
1
Share

What are the differences between the Regal and LaCrosse?

The differences between the Regal and LaCrosse are: 1. Different body dimensions: The Regal has a length, width, and height of 4904mm, 1863mm, and 1461mm respectively, with a wheelbase of 2829mm; the LaCrosse has a length, width, and height of 5026mm, 1866mm, and 1462mm respectively, with a wheelbase of 2905mm. 2. Different fuel tank capacities: The Regal has a fuel tank capacity of 55 liters; the LaCrosse has a fuel tank capacity of 60 liters. 3. Different power outputs: The Regal has a maximum horsepower of 169ps, a maximum power of 124kw, and a maximum torque of 250nm; the LaCrosse has a maximum horsepower of 237ps, a maximum power of 174kw, and a maximum torque of 350nm.
3
5
Share

Does the Audi R8 have a convertible version?

Audi R8 has a convertible version. The R8 is introduced as follows: Model Introduction: The Audi R8 is a mid-engine two-seater supercar under the Audi brand, launched in 2006. Engine Performance: It is powered by a 5.2L V10 naturally aspirated engine, capable of producing a maximum output of 397kW and a peak torque of 540N·m, paired with a 7-speed dual-clutch transmission. Exterior Design: The vehicle has a width of 1.904 meters, with a length and height of only 4.431 meters and 1.249 meters respectively, embodying the true proportions of a racing car. The 2.65-meter wheelbase provides ample space for the oversized cockpit, with the longitudinally mounted engine positioned right behind. Behind the doors, between the wheel arches and the roof, there are wide blade-like side air intakes that supply sufficient airflow for the V8 engine's intake and cooling. The painted finish of the side blades perfectly matches the body color.
2
0
Share

How to Solve the Rattling Noise from Camry's Sunroof?

The solutions for the rattling noise from Camry's sunroof are as follows: 1. Prepare the necessary tools: a flat-head screwdriver, a small bottle of lubricating grease, and several pieces of tissue paper. Use the tissue paper to clean the left and right sliding tracks of the sunroof. 2. Open the lubricating grease and apply it to the left and right sliding tracks of the sunroof. Note: after checking where the sunroof makes noise, apply more grease to those areas, as they experience the most friction. 3. Take the flat-head screwdriver and evenly spread the lubricating grease on the left and right sides of the sunroof, ensuring the grease is accurately applied to the sliding tracks. Reapply grease to the noisy areas to ensure smooth operation. 4. Finally, return to the car, close the door, and repeatedly open and close the sunroof using the switch. This helps distribute the lubricating grease evenly across every part of the sliding tracks, ensuring proper contact with the sunroof. As a result, the sunroof will not produce any rattling noise while driving.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.